Bridgeport Milling Machine Restoration

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 685

  • @jonharrington4454
    @jonharrington4454 3 ปีที่แล้ว +25

    I’m dieing inside watching you run a belt grinder and a angle grinder on such a precise machine.......yikkkes

    • @corrod3195
      @corrod3195 8 หลายเดือนก่อน +4

      I was watching that too. At first i thought he was just cleaninng the rails further out then i watched him put that grinder against the fish scales on the ways and I cringed so hard

    • @heaven-is-real
      @heaven-is-real 3 หลายเดือนก่อน

      ruined? don't know for sure

    • @markmarkiewicz9848
      @markmarkiewicz9848 3 หลายเดือนก่อน

      At least the scraping of the ways looked good.
      Definitely would be thoroughly checking the table with an indicator.

  • @AnneofAllTrades
    @AnneofAllTrades 3 ปีที่แล้ว +42

    Man, I’m so jealous! I’ve wanted a Bridgeport for so long! That thing is incredible.

    • @BlackBeardProjects
      @BlackBeardProjects  3 ปีที่แล้ว +8

      I know the feeling! I'm sure you'll find one as well. Good luck!

    • @ickserdelgado4642
      @ickserdelgado4642 3 ปีที่แล้ว +1

      Excelente trabajo.

    • @artofeverything1816
      @artofeverything1816 3 ปีที่แล้ว

      I do and I don’t. It’s a big machine, takes up a lot of room and requires 3 phase power. So I haven’t seriously looked for one because I’m not sure I really want it in my shop. I do have a mini mill that works fine for anything knife/paper weight sized. The bridgeport would be great for engine work like boring cylinders or decking heads which are going to be too big for the mini mill.

    • @HandToolRescue
      @HandToolRescue 3 ปีที่แล้ว +5

      Just make one.

    • @AnneofAllTrades
      @AnneofAllTrades 3 ปีที่แล้ว +2

      @@HandToolRescue I need a bridgeport to be able to make a bridgeport haha

  • @GrahamDallas
    @GrahamDallas 3 ปีที่แล้ว +55

    Great job, I used to work a Bridgeport for 50 hours a week, every week many years ago. Yours was in better condition when you started than the one I used. It looks really clean, reasonably recently scraped ways and the DRO is a great addition.

    • @patrickd9551
      @patrickd9551 2 ปีที่แล้ว

      agreed, this machine was basically just dirty but in almost perfect working condition.

  • @survivalcek5276
    @survivalcek5276 3 ปีที่แล้ว +5

    Is not like a restoring, it is more like clean and oil the Bridgeport
    Very beautiful video

  • @erikhasler
    @erikhasler 3 ปีที่แล้ว +23

    I once restored a Bridgeport that had spent a couple years sitting silently with "cool-tool" residue caked all over it, inside and out! Takes a lot of determination and patience to do these restorations

  • @dennisschaaf8813
    @dennisschaaf8813 2 ปีที่แล้ว +3

    I'm impressed you did that in less
    than a half hour, Mr B.

  • @Thedudeabides803
    @Thedudeabides803 ชั่วโมงที่ผ่านมา

    Let’s see the head disassembled next. There is a lot of grease packed into the gears that could always use a cleaning and re pack and the brake assembly for the spindle is a good thing to replace if needed. I completely dissembled mine, found ball screws in x and y axis. Found a mountain of chips in the knee which chowdered the knee bevel gear which I replaced the gears. Got a new lube pump and I paid $700 for mine and spent over $800 in new parts to make it perfect but it was so worth it. I had to rebuild the ball screws which I was told can’t be done, but I did. It was satisfying seeing this again. Good job.

  • @curtisweller4138
    @curtisweller4138 3 ปีที่แล้ว +1

    Wow, to call this project ambitious would be a gross understatement. Bravo for taking the time to clean and polish so many parts! I’m sure that this mill will give you excellent service for many years to come. Again, bravo!

  • @ZombifiedWatermelon
    @ZombifiedWatermelon 3 ปีที่แล้ว +1

    I'm not gonna lie.......for the vast majority of this video I had no idea WTF you were doing but it was incredibly satisfying LOL. Good job breathing new life into an old machine.

  • @MajorRocker74
    @MajorRocker74 3 ปีที่แล้ว +1

    Nicely done! Thanks for not adding music to your video. I like adding my own while still being able to hear what you're doing.

  • @thepatientartisan
    @thepatientartisan 3 ปีที่แล้ว +6

    Great work brother! Your machine restoration and tool build videos are my favorites. That Bridgeport milling machine is a Grail tool for most in the hobby maker world, and you have not only found one, but you have brought an old soldier back into service! It'll serve faithfully for many years to come. Can't wait to see what you do with it in the future! Be well.

  • @yeager17832
    @yeager17832 3 ปีที่แล้ว +72

    Your video editing technique is almost as impressive as your restoration skills. A joy to watch.

  • @michaelgent6024
    @michaelgent6024 3 ปีที่แล้ว +111

    Looks more like a Bridgebort. -Hand Tool Rescue

  • @officialbritishtaxpayer5609
    @officialbritishtaxpayer5609 ปีที่แล้ว

    I love the Bridgeport especially the BR2J2 like this. All the knobs are in the right places and you only need one spanner! Great to see this grubby example brought back to life: well done!

  • @belatoth3763
    @belatoth3763 3 ปีที่แล้ว +20

    This was a lucky buy, all ways are scraped recently, everything works just fine. You neednt do anything but cleaning. Brazed parts are questionable.

  • @Rondawg60
    @Rondawg60 3 ปีที่แล้ว

    You made it look so easy, but it shows with a little elbow grease you can revive the beauty of such a piece... Great Video. Thanks for Sharing

  • @thespaniard1810
    @thespaniard1810 2 ปีที่แล้ว

    Fantastic job. You are truly fortunate to have one of these machines. I served my engineering apprenticeship on one of these, so I have a soft spot for them. Keep up the food work.

  • @Donorcyclist
    @Donorcyclist 3 ปีที่แล้ว +1

    Beautiful job restoring a workhorse of a machine! Thank you for saving it from the scrap heap, BBP.

  • @uhavenosushi
    @uhavenosushi 3 ปีที่แล้ว +11

    The scraping on the ways is in remarkably good condition. Doesn’t look like this machine had too hard of a life!

    • @codprawn
      @codprawn 3 ปีที่แล้ว

      Looks brand new!

    • @felixe.8402
      @felixe.8402 3 ปีที่แล้ว

      🤣 It isn't an geometrical scraping... These are only oil pokets cause the original scraping was fully grinded away

    • @uhavenosushi
      @uhavenosushi 3 ปีที่แล้ว

      @@felixe.8402 the scraping is clearly visible as were the oil channels. Further, If you don’t know what you’re talking about don’t comment. “geometrical scraping”?, what are you talking about? Scraping isn’t “geometrical”.

    • @al1sa920
      @al1sa920 3 ปีที่แล้ว

      What do you mean? Z-axis needs rescraping. The only perfect restorations of these machines I've seen are on CaLem's channel

    • @uhavenosushi
      @uhavenosushi 3 ปีที่แล้ว +1

      @@al1sa920 what do you mean? The z axis looks more than adequate. You realize the top of the dovetail isn’t the bearing surface right? I never said anything about a “perfect restoration”. If you’ve ever seen a well used Bridgeport the ways all wear through the scraping. I don’t care about some OCD TH-cam channels “perfect restoration”. This is a great find, and perfect candidate for a light restoration.

  • @50french23
    @50french23 ปีที่แล้ว

    I love this video, I’ve watched it a couple times now. You do a beautiful job and it’s amazing to think of all the cool things that machine has been apart of making in its past

  • @jg.soarescutelaria
    @jg.soarescutelaria ปีที่แล้ว

    Wow how much perfection in the reform on the other hand the good thing is that we know the machine completely congratulations.

  • @J-Justice666
    @J-Justice666 2 ปีที่แล้ว

    I really like the way you speed things up. You put out a lot of information in a very short time. Awesome video.

  • @OmegaGamingNetwork
    @OmegaGamingNetwork 3 ปีที่แล้ว

    Something deeply satisfying about a "Working restoration" instead of just make it pretty. Only one thing I would pick fault with and it falls so deep into personal opinion territory I won't even bother saying what it was. Just 25 minutes of pure enjoyment.

  • @kevinholden4595
    @kevinholden4595 ปีที่แล้ว

    Very sympathetic restoration. I guess I would call it an oily rag and bushings restore. That is not to diminish the work you put in. The transformation in looks and probably workings too is fantastic.

  • @timd1191
    @timd1191 3 ปีที่แล้ว

    I have like the first bridgeport ever made. This one is such a beauty, all the bells and whistles. Great job

  • @McCreightMB
    @McCreightMB 3 ปีที่แล้ว

    I would’ve gotten through the disassembly and then said oooh nooo I fudged up. I’m glad guys like you can get things back together right on these bigger pieces. Made that thing look 20 years younger!

  • @adoraquodincendisti
    @adoraquodincendisti 3 ปีที่แล้ว

    I really like that your vids are quite long. And that you restore and use that old machines. Incredible!

    • @adoraquodincendisti
      @adoraquodincendisti 3 ปีที่แล้ว

      ...I was checking out an ancient train station once and there was a workshop too. The machines looked like this one.

    • @kalamvalleyvlog
      @kalamvalleyvlog 3 ปีที่แล้ว

      Nice

  • @WHJeffB
    @WHJeffB 3 ปีที่แล้ว +1

    Great job cleaning it up and repairing it! You hit the jackpot with that "used" Bridgeport... Other than a few broken parts and some wear, the thing is pretty cherry. Hardly any damage to the table, and the ways appear to be in really good shape! Hope to get one someday and I equally hope I can find one in that good a shape... Enjoy your new machine, any home machinist would love to have one, especially in that good a condition.

  • @alexmansion5665
    @alexmansion5665 3 ปีที่แล้ว

    Wow🤤 What a awesome restoration and congrats to finding this gem. You have a mill for ur childrens childrens children and some.

  • @scottconville9780
    @scottconville9780 2 ปีที่แล้ว

    I don’t have any idea what you just did but found it extremely interesting and satisfying. Maybe I’m a machinist in a previous life

  • @matthewrice5721
    @matthewrice5721 3 ปีที่แล้ว +9

    That's a lovely mill and it's nice to see it so well restored. But what we really need is more corgi footage. :)

  • @GooseGosselin
    @GooseGosselin 3 ปีที่แล้ว +3

    Bravo! Much nicer than the one I have to use. I was actually excited to see your first cut! I always like seeing the tools you've restored being used, I'm sure this one will be in many upcoming videos.

  • @BruceBoschek
    @BruceBoschek 3 ปีที่แล้ว

    What's not to love about that? A beautiful restoration of a very deserving machine. Thanks for sharing your expertise and experience.

  • @Evolucion7
    @Evolucion7 3 ปีที่แล้ว

    Lovely machine. The ways looks like they were rescraped and then the machine sat idle and collected dust and rust. It's nice to see it make chips.

  • @APTheis
    @APTheis 3 ปีที่แล้ว +3

    This may be one of my favorite videos from you. Everything about this restoration was on-point!

  • @leslienixon9274
    @leslienixon9274 3 ปีที่แล้ว +6

    What a treasure! I think a machine with those options in that good of condition for it's age in the Us would be considered a real find. You'll wonder how you survived without it.

    • @Dwarfracer88
      @Dwarfracer88 3 ปีที่แล้ว

      All it needs is dual climate control to be the most highly optioned Bridgeport I think I've ever seen.

  • @ericcartrette6118
    @ericcartrette6118 3 ปีที่แล้ว +1

    At least on camera, you tear into those machines and remember how to put them back together no problem. I'd have "spare parts" everywhere! Great work. I love watching you give these old machines new life. It's fun when you use them in future videos and I can say, "Oh! I remember when he restored that one!"

  • @zekecorder8226
    @zekecorder8226 2 ปีที่แล้ว

    That was one AMBITIOUS project!! Nice job, well done. I wish I had the engineering knowledge to tackle such a project.

  • @БорисСимонов-э3п
    @БорисСимонов-э3п ปีที่แล้ว +1

    Станок не новый но в отличном состоянии ,меня удивляет как люди продают такое хорошее оборудование , всего то просто помыть и можно работать. Мне чтобы запустить свой 676 фрезерный станок 1967 года выпуска пришлось шлифовать все направляющие и это стоило больше стоимости самого станка но сейчас он можно сказать как вчера с завода и очень радует своей работой!

  • @barrymartin7085
    @barrymartin7085 3 ปีที่แล้ว

    They don't make better milling machines. Great job.

  • @jasenalford9021
    @jasenalford9021 2 ปีที่แล้ว

    Extremely enjoyable to watch. Cleans up item so well that it's a pleasure to watch. Would like voice over to go with video though just for added enjoyment. Awesome vid though!!!

  • @sonofsupernova3455
    @sonofsupernova3455 3 ปีที่แล้ว +1

    A bonnie, a beauty and a joy forever. Congrats.

  • @The93Momo93
    @The93Momo93 3 ปีที่แล้ว +5

    Probably your most serious hardware in your workshop yet! Nice clenaup, it was in a pretty okay shape all things considered, doesn't look like it was used that much.

  • @brechfaknives8187
    @brechfaknives8187 3 ปีที่แล้ว +3

    You've done a lovely job on that beautiful machine! back to life without robbing it of its original character and the story all of its little marks and imperfections tell. I'm sometimes saddened when I watch people strip them back to the casting, fill and repaint. Great job man - I've watched the entire video 3 times already - Thanks!

  • @slvr1.618
    @slvr1.618 3 ปีที่แล้ว

    Bridgeports are a thing of beauty!really liked you did those repairs with brazing-a personal favorite!

  • @nickbalzer9783
    @nickbalzer9783 3 ปีที่แล้ว

    That was awesome my son and I enjoyed this video greatly

  • @demo3456
    @demo3456 3 ปีที่แล้ว

    this had to of took a month to do. I was lost 6 minutes in when it came to what goes where.
    These guys that work on these machines are legit
    This machine is prob older then most of us and will be of use long past us as well.
    Bridgeport made a hell of a machine

  • @radder76
    @radder76 3 ปีที่แล้ว +6

    Такой станок давно напрашивался в мастерскую. Приятно наблюдать за вашим развитием. Удачи и новых успехов для вас и интересного контента для зрителей канала (нас).

    • @lextalionis2015
      @lextalionis2015 3 ปีที่แล้ว

      Интересно, сколько такой станок будет стоить деревянными? Ляма 2? А может и больше.

    • @cncmetallyst7162
      @cncmetallyst7162 3 ปีที่แล้ว +2

      чувак нагрел клин вертикальной оси до побежалостей, когда ухо приваривал. Теперь тот клин только выкинуть нужно, ан нет - аудитория хлопает, всё по красоте, а клин он туда и посадил. Бедный станок....

    • @manakhovnik
      @manakhovnik 3 ปีที่แล้ว +2

      inFamous Cole тоже удивили комментарии, он только хорошо помыл его, но вот стал ли он от этого лучше, очень сильно сомневаюсь.

  • @Sludgepump
    @Sludgepump 3 ปีที่แล้ว

    Wow! Beautiful! Can't believe how brave you are ripping this thing down. Awesome job.... Hope the person who sold it to you gets to see this. Great video!

  • @philipzielinski
    @philipzielinski ปีที่แล้ว

    First impression was that machine was spent. But the scraping on the ways is incredible. Other than the broken gib it ended up being pristine. What a charmed find!

  • @_DRMR_
    @_DRMR_ 3 ปีที่แล้ว

    Can't believe that machine cleaned up so nicely!
    Superb addition to the shop and can't wait to see what you're going to make using it.

  • @bonifacivalencia5083
    @bonifacivalencia5083 3 ปีที่แล้ว

    Congratulations for your new big toy, nice projects are coming.

  • @qtstextile
    @qtstextile 3 ปีที่แล้ว

    man who loves his job. I have great respect for you

  • @cjtaylor0103
    @cjtaylor0103 3 ปีที่แล้ว

    I was waiting for you to crack in to that J-Head....that's where the real fun begins! Good work. Clean machine overall. You found a gem. Mine came from a food processing factory and it appeared they used it as a drill-press and washed it down with a waterhose. Nothing moved, nothing worked. Got it for $280. Completely restored with the additions of power feed on every axis, 4-axis magnetic DRO, and power drawbar. Could probably sell it for $5-7K now.

  • @gfrankum63
    @gfrankum63 3 ปีที่แล้ว +26

    You got yourself a Bridgeport. Good for you. Hope we'll see plenty of new content of you using this classic mill.

  • @fireforcecreative
    @fireforcecreative 2 ปีที่แล้ว

    I would love to get an old machine and do this one day! Follow your lead.

  • @rsz90182
    @rsz90182 ปีที่แล้ว

    You have inspired me to do the same. Now to go find a bridge port in that good condition.

  • @actualsurfer
    @actualsurfer 3 ปีที่แล้ว

    I didn't think you could restore a Bridgeport in 1/2 hour but you did it!

  • @user-br3ou2cs9o
    @user-br3ou2cs9o 2 ปีที่แล้ว

    Learned/tested for many basic/complex milling projects/processes using one of those as part of a CNC Operator/Machinist apprenticeship.
    Also enjoyed learning/testing using the various chuck-sized/H.power older lathes as well. So much freakin' cooler than just programming a modern CNC machine and hitting the go button. Lol

  • @pauljohansson695
    @pauljohansson695 3 ปีที่แล้ว

    You do a great job of restoring and making things.

  • @seancrowley7520
    @seancrowley7520 3 ปีที่แล้ว

    That's great work. And probanly the best video editing I've ever seen on a restoration. A pleasure to watch. Thanks.

  • @Dmitry928
    @Dmitry928 3 ปีที่แล้ว

    Bravo! As an experienced repairman, I give you a standing ovation!

  • @maxbrpgvm
    @maxbrpgvm ปีที่แล้ว

    I I bought a used bridgeport, I'm loving it ,i loved your vídeo too

  • @jimmyeatshoe
    @jimmyeatshoe 3 ปีที่แล้ว

    WOW! Game changer! You just levelled up sir 🤘🏻

  • @vaporblast9721
    @vaporblast9721 3 ปีที่แล้ว

    Nice piece of machinery you got there. Can't wait to see you use it for your projects.

  • @MakeEverything
    @MakeEverything 3 ปีที่แล้ว +72

    Beautiful machine!!

    • @polishmachine8303
      @polishmachine8303 3 ปีที่แล้ว

      Yes, the best restoration teacher too🙏👍

    • @mrsock3380
      @mrsock3380 3 ปีที่แล้ว

      It's a shame a hack like this guy did his best to ruin it, wire wheel on the table is butchery, let alone the parts he broke and brazed back together.

  • @crandallwoodworking2988
    @crandallwoodworking2988 3 ปีที่แล้ว +1

    I love watching your restoration videos, and this one was exceptional! Thank you, sir! Great as always

  • @matthewburns5053
    @matthewburns5053 3 ปีที่แล้ว

    Great job. Congratulations on your new Bridgeport.

  • @tomwagemans1872
    @tomwagemans1872 3 ปีที่แล้ว

    Not much to restore on this beauty. It still was in great shape. Nice job!

  • @adamdiaz8442
    @adamdiaz8442 2 ปีที่แล้ว

    Woul be nice to see some projects being made on this,great cinematography by the way

  • @timthelen3917
    @timthelen3917 3 ปีที่แล้ว +1

    Early eighties? All the flaking is in great condition, and decked out with factory power feeds! Great find, please come clean mine now!

  • @ScrewsAndTools
    @ScrewsAndTools 3 ปีที่แล้ว

    First of all, congratulations on the new multifunctional tool! Secondly, a good restoration! Thirdly, I still use a rust remover, wash, dry and wipe with oil.... How I want a new sandblaster haha! Big like!

  • @loydevan1311
    @loydevan1311 3 ปีที่แล้ว +1

    You need to do a more indepth trial run project that tests the full functionality of the mill. Great video. I'm jealous. Thanks for the share. Again, great video. In part two, construct a revolver. The dog is very cool too.

  • @publicclammer
    @publicclammer 2 ปีที่แล้ว

    a Corgi!! We've had Corgis for over 40 years and they are the best family members!

  • @vinceianni4026
    @vinceianni4026 3 ปีที่แล้ว

    Hello black beard beautiful machine beautiful restoration good job well done

  • @lukaradakovic5463
    @lukaradakovic5463 3 ปีที่แล้ว

    Looks very nice. Without any work on the geometry i'd still say this is a cleanup rather than a restoration.

  • @thetinkerist
    @thetinkerist 3 ปีที่แล้ว

    What a machine! You have a bridgeport now, I'll closely watch your channel now :)

  • @Nandel67120
    @Nandel67120 3 ปีที่แล้ว

    Such a great puzzle !! A pleasure to watch your work 👍

  • @JMulvy
    @JMulvy 3 ปีที่แล้ว

    That is impressive! I love that we can essentially manufacture our own parts now. If you told my father 20 years ago we would reach a point in technology that you could 3D fabricate and laser cut your own parts in your home... he would have bricked. Yeah, they can be expensive but the return is what makes them an investment. Kudos to you on another job well done!

  • @Snooooozel
    @Snooooozel 3 ปีที่แล้ว +9

    sounds like the motor/spindle needs new bearings? or is this crazy sound caused by your playback speed? 🤔

    • @mrgodBG
      @mrgodBG 3 ปีที่แล้ว +3

      i also think motor/bearings sounds rly bad

    • @Gappasaurus
      @Gappasaurus 3 ปีที่แล้ว +2

      Video description says bearings are fine, the pitched-up audio from the FF motion just makes them sound screechy & bad.

    • @turningpoint6643
      @turningpoint6643 3 ปีที่แล้ว

      It's the rattle caused by the plastic bushings used in the mechanical variable speed heads. A well known problem area.

    • @BlackBeardProjects
      @BlackBeardProjects  3 ปีที่แล้ว +4

      Souns fine in real life, 4x speed makes things sound weird for sure! It is bit loud at high rpm and a bit cluky at low but not too bad.
      Haven't decided yet if it's worth replacing spindle bearings, I think there is still life in them! Probably fine for my uses :)

    • @mrgodBG
      @mrgodBG 3 ปีที่แล้ว

      @@BlackBeardProjects well if everything is OK than hurrayyy ☺ You rly did exquisite restoration 👍

  • @mrayco
    @mrayco ปีที่แล้ว

    All hand scrape appears very well ,, 👍🏻,,thanks for sharing

  • @funwithrepair
    @funwithrepair 3 ปีที่แล้ว

    Great resturation. Nice to see this kind of machinery been brought to life and been of good purpose. 👌👌

  • @branedan8620
    @branedan8620 3 ปีที่แล้ว

    Nice work! Its a little bit funny to see the rabbit and turtle on the speed regulator, fits better on a toy then on a professional tool :)

  • @jeremyjones2191
    @jeremyjones2191 2 ปีที่แล้ว

    That's a beautiful piece of machinery!!

  • @erwe1054
    @erwe1054 ปีที่แล้ว +1

    Да он в идеальном состоянии! Его только почистить
    масло каналы забыл продуть сжатым воздухом

  • @tomswindler64
    @tomswindler64 3 ปีที่แล้ว

    Great refresher on the machine,looks like a nice addition to your shop😎😎😎👍👍👍

  • @aeroathos
    @aeroathos 3 ปีที่แล้ว

    Amazing! I love this restoration videos. Even I didn’t know about the existence of this “manual CNC”. Great job! Thanks for sharing!

  • @NomadMakes
    @NomadMakes 3 ปีที่แล้ว +2

    Congratulations on a fantastic machine :D Looking forward to see you using this in your upcomming videos. Cheers and have a nice weekend.

  • @michaelprah2263
    @michaelprah2263 2 ปีที่แล้ว

    Very good video. I enjoyed the process of your work. Also, very nice machine.

  • @davidfrank2824
    @davidfrank2824 3 ปีที่แล้ว

    As always another great job. Cannot wait to see what you are able to make with that. Look forward to your next video.

  • @TomMakeHere
    @TomMakeHere 3 ปีที่แล้ว

    Awesome work
    That mill was in great condition under the rust and dirt

  • @Brandon-so9fp
    @Brandon-so9fp 3 ปีที่แล้ว

    Congrats on getting a beautiful machine.

  • @grand_scope808
    @grand_scope808 3 ปีที่แล้ว

    Most satisfying video! To see a beautiful machine brought back to life this way! Well done sir!!

  • @johngrace199
    @johngrace199 3 ปีที่แล้ว

    On one of your future big restoration projects, you could demonstrate your method for keeping track of parts and how things came apart. I suspect that many would find that just as enjoyable, I know I sure would. Great job...

  • @ayoutubechannul
    @ayoutubechannul 3 ปีที่แล้ว

    I would love to do this to my dad's Bridgeport, that thing has had better days but still runs like a champ

  • @robertovillalobos4798
    @robertovillalobos4798 3 ปีที่แล้ว

    Excelente trabajo y excelente máquina regreso como nuevo al trabajo . Yo creí que el burro era de madera cuando lo limpiaste quedé sorprendido. . Saludos desde Venezuela ciudad de Maracaibo.

  • @logiboy123
    @logiboy123 3 ปีที่แล้ว +2

    Love your videos man, you put so much effort into creating really amazing footage and the pacing of the work is really engaging.

  • @orugma
    @orugma 2 ปีที่แล้ว

    Thanks for this, it was fun to watch. I don't know much about these machines, but it seems like you did a great restoration and it will serve you well. I think it would have helped to have explanations of the important steps of the process, or at least labeling the parts as you go, so less experienced people can follow and learn.

  • @charles-iii6759
    @charles-iii6759 28 วันที่ผ่านมา

    Love that milling machine. Nice restoration.

  • @SwedishChef1977
    @SwedishChef1977 3 ปีที่แล้ว

    People giving this a thumbs down are probably just jealous. Awesome job!