Seeing that Xylol /Xylene brings tears to my eyes.....I used to have that in my hardware store whenever I needed it. Now, Illegal in California. I need to move.
I am at the same stage with my Jeep... Since I have installed the wiring harness before, I could really use Fuel Lines next. Thanks for all you do Scott!
You got a very good coverage on that, I find it is easier to get the inside floor right by tipping the tub on its side, that way the dry overspray does not fall back on the lower floor panels(I put cardboard masks on the lower faces to catch the overspray), with a bare tub like you have here that is a much easier way of spraying the inside faces. Stay safe! Chris B.
EDS Transit Scott That’s my good buddy Remy. The Remster. If you look close in the vid, he likes to camp out under the tub and dig himself a cool spot😉😂👍
If anyone outside the US wants to have this colour and you don't find how to get it imported or whatsoever, go to your local paint shop and give them this number 33070 My local paint shop here in Belgium managed to convert this to a modern standard and mix it for rattle cans and 2k paint for my spray gun. It was not cheap (about 100 euro for 1L of paint, hardner and thinner is cheaper. And the cans where around 15-20 i think), but the colour is nice and the quality is good. Hope this helps somebody.
Hello dear Community I need help! My name is Julian Bläsius I am 19 years old and come from Linz Austria. Therefore I would like to apologize in advance for my bad English. Unfortunately my uncle has recently passed away. When we cleaned out his house we found a Jeep Willys MB in the garage. In Austria we have to do a security check every year. This was last done in 1970. So the last time the engine has moved was 50 years ago. Since I have never worked with oldtimers I need help. Can you please give me some tips on how to start the engine without breaking anything. I wish you a nice day. With kind regards Julian
I have shot a video for just you to answer. Many will respond to this. Thank you for your question and your post. Very excited for you my new friend. Video is uploading 👍
Of course, and “stencils”!!! It’s super easy to touch up as well. Available in rattle cans. If you do it, please send me a pic. I think it would be awesome 👏
Hey Scott, I’m planning on painting a high top cargo van with this paint and trying to figure how much I should get. Could you give me any estimates on about how far a gallon of this paint goes? Thanks and very cool jeep!
Austin, I used 1 gallon on the body tub fenders, windshield, hood, top bows. I would say for cargo van, two to three gallons. It’s a one part enamel, and very affordable.👍
I haven’t used hardener, however some I know have. It will give it a bit of a sheen. If you use hardener, make sure it’s compatible with synthetic oil based enamel 👍
![SAFEPLANET - ดาวเคราะห์ [ THE PLANET ]](http://i.ytimg.com/vi/4X1XL3I_k3c/mqdefault.jpg)
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Seeing that Xylol /Xylene brings tears to my eyes.....I used to have that in my hardware store whenever I needed it. Now, Illegal in California. I need to move.
I just found your channel, and as soon as I heard you pronounce "Willys" correctly, I subscribed. Thanks for knowing your subject.
Thank you👍 Glad to have you here.
You been waiting a while to paint the tub. Wait a little longer and go throw the frisbee. The tub ain't going anywhere. Awesome pup
I am at the same stage with my Jeep... Since I have installed the wiring harness before, I could really use Fuel Lines next. Thanks for all you do Scott!
Both coming soon👍
You got a very good coverage on that, I find it is easier to get the inside floor right by tipping the tub on its side, that way the dry overspray does not fall back on the lower floor panels(I put cardboard masks on the lower faces to catch the overspray), with a bare tub like you have here that is a much easier way of spraying the inside faces. Stay safe! Chris B.
I just received 3 galons--cant wait to spray my jeep!
Way to go,Ron. We're with you?
Oops! Meant to say "We're with you!!". Guess my texting finger got too excited.
Well done, I like it! Thank you for the video! And a good dog!
Nice, love the Dog !
EDS Transit Scott That’s my good buddy Remy.
The Remster. If you look close in the vid, he likes to camp out under the tub and dig himself a cool spot😉😂👍
Fuel Lines----Looking really good!!!
Scott - these are great videos! Would love to see a video on installing ground straps, fuel lines and electrical wiring.
looks great. i got me a homedepot paint n prime in army green for my rusty faded 88 toyota truck and it came out almost as good as your jeep.
If anyone outside the US wants to have this colour and you don't find how to get it imported or whatsoever, go to your local paint shop and give them this number 33070
My local paint shop here in Belgium managed to convert this to a modern standard and mix it for rattle cans and 2k paint for my spray gun. It was not cheap (about 100 euro for 1L of paint, hardner and thinner is cheaper. And the cans where around 15-20 i think), but the colour is nice and the quality is good.
Hope this helps somebody.
Muchisimas gracias por el codigo del color , tengo un proyecto de una Bicicleta estilo militar y la quiero pintar del mismo color de los Willys MB
Did I miss the movie about installing the Top Bow Pivot Bracket ?
Looks great wiring please
Did I miss the ones such ast front axle rebuild, setting up the steering knuckles etc? I saw the tear down one.
I have it filmed, but have not done an edit and upload yet. It’s coming.👍
Need the block of instructions on the Wiring please.
Wiring please 🙏
Mark Cover working on it now👍👍👍👍
Looks good!
A trick : watch series on Flixzone. Me and my gf have been using them for watching loads of movies these days.
@Rhett Keagan definitely, have been watching on Flixzone} for since november myself :D
Have a question we painted with this paint can you put more coats on say a week or two later can I just sand with 600 and repaint using the same paint
Fuel line pls
How many cans would i need for a Dodge Durango?
I like this color
@@leonardwradley4870 my guess would be 2 gallons
Excellent thanks
Hello, just purchased some OD green for a truck i will be painting, will like to know if you need to clear coat ? Hope i don't need to.
Hello dear Community
I need help!
My name is Julian Bläsius I am 19 years old and come from Linz Austria. Therefore I would like to apologize in advance for my bad English. Unfortunately my uncle has recently passed away. When we cleaned out his house we found a Jeep Willys MB in the garage. In Austria we have to do a security check every year. This was last done in 1970. So the last time the engine has moved was 50 years ago. Since I have never worked with oldtimers I need help. Can you please give me some tips on how to start the engine without breaking anything.
I wish you a nice day. With kind regards Julian
I have shot a video for just you to answer.
Many will respond to this.
Thank you for your question and your post.
Very excited for you my new friend.
Video is uploading 👍
I can't find Xylene anywhere local, but I found some Majic Reducer at Tractor Supply. Would that do the trick?
It may cause the finish to have more of a sheen.
The big box stores like Lowe’s and Home Depot have Xylene in the house painting departments.👍
@@TeamG503 I wanted to let you know I did end up using the Majic Reducer based on your comment, and it turned out having a gorgeous satin finish!!!
can decals and badges be applied to this paint? I want to paint my 94 YJ this color
Of course, and “stencils”!!!
It’s super easy to touch up as well. Available in rattle cans.
If you do it, please send me a pic.
I think it would be awesome 👏
@@TeamG503 cool... how many gallons of this stuff would I need?
Hey Scott, I’m planning on painting a high top cargo van with this paint and trying to figure how much I should get. Could you give me any estimates on about how far a gallon of this paint goes? Thanks and very cool jeep!
Austin, I used 1 gallon on the body tub fenders, windshield, hood, top bows. I would say for cargo van, two to three gallons. It’s a one part enamel, and very affordable.👍
@@TeamG503 Awesome thanks a lot! Have you ever used hardener in it to give it a little more durability?
I haven’t used hardener, however some I know have. It will give it a bit of a sheen. If you use hardener, make sure it’s compatible with synthetic oil based enamel 👍
Do you know which color code on this brand is the lighter one ? Also how do you get a satin finish out of it
33070 RFJP Low Luster Olive Drab from RFJP.
You could add a hardening agent, and probably get a little bit more of a sheen.👍
Hey Scott, was this the same mix you used for your engine? Thanks
C Mathews yes👍
Awesome
What size tip did you use on your gun
Does RFJP sell any jeep paint colors other than OD?
Tom Fitch various shades for the military vehicles. And the most perfect Blue Drab👍
What is the color code??
I need to ask about the air compressor you have when you painted the tub like cam at psi and the paint gun psi at c
I was tryin to ask about your air compressor you have when you painted this tub like cfm at psi and the paint gun cfm at psi
Wiring please 👍
Wiring Please
can i spray a matte clear over this paint?