ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2014
- If you learned something or didnt know you could do this yourself.
Please smash that like button.
It took about 15 minutes of actual work, the tires are kumho 245/35r18 mounted on a 18x10j bbs rc 301 wheel which sadly is in very bad condition
demontage pneu pneus - ยานยนต์และพาหนะ
![🔴 [TRỰC TIẾP] U20 VIỆT NAM VS U20 THÁI LAN | Cúp VTV9 - Bình Điền 2024 | JET STUDIO](http://i.ytimg.com/vi/tdmZlw-XJJI/mqdefault.jpg)
i see some dislikes and would like to point out , this is in any way not a recommended way to take a tyre off a nice wheel.
also when you get used to a certain technique you get better at it and faster.
a while back i bought a strong tyre machine and a balancer, ofcourse it's easier now and safer for the wheels!
at least your taking the time to do it your self most people dont know how to use spoons
I don’t know if you’re using any standard practices here but the bottle jack inside a steel frame looks impressive to me... I’m thinking bicycle racks in a supermarket parking lot
man who cares about haters. The internet i full of failure sitting online hating on sucessful people. they are not looking for success they are just looking to spread their pitful lives.. YOu did great young man .. Great job !!
Came here to double check before I do my 22's. For those that want to simplify it, use a scissor jack under a truck or suv if you don't want to build a bridge. Most scissor jacks have a curved larger base and really help with breaking that bead. Easier to handle too. Also, just use a towel under the tire tools if you wanna save your paint.
Great advice thank you sir
Good looking out brother
Idk why this only got 400 likes it’s a good vid if you ask me, thank you
I've done 20s by hand, takin it off is the easy part, not easy, but doable.. les see u mount it...been derr done dat, its a pain in the ass!
Lubrication is the key to success, nice job!!
That was absolutely magnificent!
That was crazy nice 👍🏾
Awesome thanks for the upload
Well done
You got faith in your box section, good work man.
haha, i never worried it would fail
thanks!
I think it's easier when your rim is tapered like that.. Let's the tire have more give. My rim is neatly flat all the way across making it a nightmare with the tire spoons.
You did mark/damage the rim didn't you ? How can you remove without damaging the alloy ?
your a damn genius. got one I wanted to scrap and couldn't get it off.now I can. thanks:)
Wow my respect to you,
damn that's work right there jaja
it can be done but that looked very difficult
Good video thankyou
thanks and no problem!
Wow that’s impressive. Didn’t know that could be done. What are you spraying on the beads?
Bob Long soapy water
Got to get a 4 x 4 welded frame at the correct dimensions
I need to do it the other way on my rims. Removing from the front of the rim.
that is possible , useally wheels with a deep lip
did that quick haha. what's in the spray can?
Ian Hill real time is about 15 to 20 minutes a wheel, breaking the bead with improvised tools sucks though.
the spray can is just some rubber conditioner, anything works that makes the rubber slippery instead of grippy , but don't use oil it'll weaken the rubber, i use soap and a paintbrush now
I found three 20” rims with low profile tires on them today and I need the tires removed
i wish you luck :) but soap / tiregrease will make a huge difference
in that time before you dropped the bead from the rim i would have done all 4 wheels replaced tires. whats the point doing these struggle ? your rims are just badly scratched anyway.
Just showing it can be done
@@user-rp4je2gc2o yes mate . I know but i don't think its worth that effort.
@@adziomen well i have my own tyremachine and balancer now, so yeah i agree. I just left this video on because it got some views and positive comments. Why did i remove them myself?you might ask. Cause it was only 2 wheels and by the time i would be at a tyreshop and back it would of taken me the same time and maybe 8 euro on top so that was my motivation 😂
technique (Y)
I got the same kumho tires and at 1st i did not have the space to get the tire iron between the tire and wheel to flip it over... At some point i got space but i could not flip the tire over the wheel... The sidewall was TOO stiff...
I could make a video, explaining steps, some details are cruciale for An easy removal
You can try ...
If you showed a shot of hand mounting a new 235/40-18 tire, that would be impressive...and pretty much impossible.
+Craig Moore mounting is easier, you barely have to get in there.
Craig Moore ih
35 is more difficult than 40. I have been doing 45 tires and they are really tough.
nah yo i tried this it doesnt work
It literally worked in front of all of our eyes. So it does work, you just couldn't get it to work. Is it worth the effort? That's a whole other question...
@@benadams8525 yea i got it to work but i needed two jacks and it wasnt hard at all. i think its hard to take off lower profile tires. my tire would go flat in two days because the bead had leaks all around it, so i popped it off cleaned it out and applied a light coat of slime on the bead now it holds air perfectly.
Nice Job. But Kinda cheating with the box tubing. Try using the following 2 pieces of angle iron, a 4 lb gimpy and a lever or 2. I always have that in my boot and I have never come unstuck.
intention was to save 24 euro for having my tires dismounted at a tireshop, i only needed them off to refinish the wheels, so i saved 24euro and didn't lose any time because driving there alone wouldve taken me the same time haha
24 euro for 4 or 1?
For 4 ofcourse, did it in just over 1 hour
think il pay the 5er to get my tyres took off at tyre shop lol
I couldn't watch it, because of the stupid music
Anthony Martinez urine idiot