2 things . 1 buy and use tires spoons ($20 - $25).for set of 2 ea. And 2 cut open a couple used oil containers, milk gugs, or other type of plastic container. Use those cut plastic sheets to wedge between your spoon/rim while you work the tire onto rim. Doing this will protect the rim edge from being scratched while mounting the tire. Reposition the plastic sheets and spoons as need until the tires is completely on rim. This is how the mototcycle racers do it when at the race track, takes 5 min. Dont forget the balancing of them once done... cheers.
I’m glad you pointed out the correct place to put your tire in the channel on rim, most , like 99%, never tell you that very important step to save lots of aggravating issues.that little bit of room you gain makes it so much easier. Thank you
If you have a hard time getting the bead to set, take a ratchet strap around the tread of the tire, not across the rim, literally only on the tread all the way around and tighten it up until the sidewalks blow out then add air
easy for a guy who works on tires as a living but at home for this video and has the space and facility to do it ... for others like little mrs. jones down the street ... she ain't gonna do this
All standard tire psi is between 30-35 psi you can drive on 40 but anything more than 35 WILL wear out the center of the tire faster and you'll have an uneven wear around 35psi your tires will wear evenly unless you drive a small car then 30 psi will be perfect! Do not ride on 45 psi with a small car otherwise you'll have a rough ride and pre mature worn tires but do what you want it's your own tires wearing lol just standard practice automotive certified info is all 🤷♂️😎🤙💯🔥
Its so easy to destroy the bead on the tire that way! I have done a ton of tires like this, but with tire irons that come with cars in the trunk with the spare tire. I have ruined a few good tires too!
I drive a lifted 4x4 diesel and I have never been able to get away with not balancing my tires. But on that note, good job though always nice to save a few dollars when you can.
@@Omgkhiiman that scared me not gonna lie I just put a tire on my crown Vic rim and noticed how it was looking like the tire wasn't on right but ig im doing it right imma go air it up and test it I'll be back with a update 😂
I love that quick smart tape black or grey duct tape too idea even 40 buck saver I needed by saving a whole week food shopping at price rite smoothie ingredients Mmm instead of being a carnivore I use to be haha. I really appreciate real garage remedies that businesses don't want us to know plus the city would keep hunting us like we over spilled greased at our private owned homesssss. We are not Da ones hurting people s pocketss, simply learning a trade to keep me from being stressed in not helping back. Thanks to this true teacher who will skyrocket in more subscribers keep 👍
@@wanalifyusofBy using those screwdrivers without applying the electrical tape at first. Stabbing a pointy metal tool against metal is a surefire way to gouge it, and long term damage it enough to create an unstable ride.
@@noseboop4354 if you watched the whole vid, you would see he has put tape on the screw drivers in the last steps where the force of rim and tires are teh most high.
I grew up in a tire shop my family owned for over 30 years and its worth spending the $20 or $25 to have a tire put on a rim with a machine unless you just like doing things the heard way
I’m watching this because the tire shop said they don’t have a big enough machine but I remember watching people install them manually when I was a kid Poor rim tho
$5-10/ wheel at any auto shop or get balancing beads you put inside of the tire... Not entirely sure how they work, but apparently they work really well if the correct amount is added. They're like little BB's you put inside of the tire when mounting.
You are soaping the wrong side of the tire bead when installing the front of the tire on the front of the wheel. Put the soapy water on the under side of the bead that's where its contacting the rim and it will slip on much easier.
Take a SERIOUS CLOSE UP of that rim edge while going around the circumference with your camera. I find it hard to believe you DIDN'T mar that rim even slightly.
Only one percent of people in the world make over $30,000 a year, that's why this video is doing so good, it's for the 99% of us broke people. Thanks for watching and thanks for the feedback ;)
For sure he damage the edges with the screw driver 😅he took the chance to do this video , didn’t know it would be this hard 😂. Dent with regrets , should of bring it to the auto mechanics😂
2 things . 1 buy and use tires spoons ($20 - $25).for set of 2 ea. And 2 cut open a couple used oil containers, milk gugs, or other type of plastic container. Use those cut plastic sheets to wedge between your spoon/rim while you work the tire onto rim. Doing this will protect the rim edge from being scratched while mounting the tire. Reposition the plastic sheets and spoons as need until the tires is completely on rim. This is how the mototcycle racers do it when at the race track, takes 5 min. Dont forget the balancing of them once done... cheers.
I’m glad you pointed out the correct place to put your tire in the channel on rim, most , like 99%, never tell you that very important step to save lots of aggravating issues.that little bit of room you gain makes it so much easier. Thank you
Nice Rim job bro!
Lol thx
Pause
Pause
😂😂😂😂😂😂😂😮🕳️ 🪵
No diddy
Can we get a close up of the lip so we can see how much damage was done during this process?
Not sure why he didn't spend the money for some rim protecotors, 5 dollars worth to be spend
If you have a hard time getting the bead to set, take a ratchet strap around the tread of the tire, not across the rim, literally only on the tread all the way around and tighten it up until the sidewalks blow out then add air
wow, I have never thought that it's possible without machine. Amazing!
Thanks for showing the part where to place the tire in position to the rim to be able mount the tire
Thanks for the video, this is going to save me a ton of money!
Great VIDEO MY GEE, NICE AND SIMPLE!
WHEN I DO MINES IM GONA DUCT TAPE THE SCREW DRIVERS AS TO NOT DAMAGE RIM..
Harbor freight sells a tire balancer for $100. It actually works
Don't you need to balance the tires?
easy for a guy who works on tires as a living but at home for this video and has the space and facility to do it ... for others like little mrs. jones down the street ... she ain't gonna do this
What is you don't have compressed air, just an electric pump. Will that work?
All standard tire psi is between 30-35 psi you can drive on 40 but anything more than 35 WILL wear out the center of the tire faster and you'll have an uneven wear around 35psi your tires will wear evenly unless you drive a small car then 30 psi will be perfect! Do not ride on 45 psi with a small car otherwise you'll have a rough ride and pre mature worn tires but do what you want it's your own tires wearing lol just standard practice automotive certified info is all 🤷♂️😎🤙💯🔥
I appreciate it the knowledge
Its so easy to destroy the bead on the tire that way! I have done a ton of tires like this, but with tire irons that come with cars in the trunk with the spare tire. I have ruined a few good tires too!
I drive a lifted 4x4 diesel and I have never been able to get away with not balancing my tires. But on that note, good job though always nice to save a few dollars when you can.
You don’t drive nothing garret
Tires are way too narrow for the rim
Thats the style brother. Stretched on skinnies is the only way
@@Omgkhiiman that scared me not gonna lie I just put a tire on my crown Vic rim and noticed how it was looking like the tire wasn't on right but ig im doing it right imma go air it up and test it I'll be back with a update 😂
Thank u in getting that Getty up done. You definitely not for self... Saving me lots of cash n worries.
Width of tire too small for rim looks,silly
Thanks for the help. I’m gonna try this myself. Nice work.😊
What offset do You have on those rims?
You don't want to place any lubricant on the side of the tire where the wheel is facing. You need that dry seal.
I'm surprised you ignored the red marking on tire.
Most shops do the same
The tire shops just do the same thing they put raw iron bar on the lip just like this so just do it yourself
I love that quick smart tape black or grey duct tape too idea even 40 buck saver I needed by saving a whole week food shopping at price rite smoothie ingredients Mmm instead of being a carnivore I use to be haha. I really appreciate real garage remedies that businesses don't want us to know plus the city would keep hunting us like we over spilled greased at our private owned homesssss. We are not Da ones hurting people s pocketss, simply learning a trade to keep me from being stressed in not helping back. Thanks to this true teacher who will skyrocket in more subscribers keep 👍
what about balance and rotation.
This is what i was thinking but i wonder if it would be cheaper to get that done vs the cost of having a shop put new tires on all 4 rims
rotation is pretty obvious
Do that 3 more times and youll be the the ibc champion international body building champion lol🤣
Try doing tht with a 18" and up u want be able to do it
What are you talking about
I mount 22 and 24 inch semi tires all the time with 2 bars. Take me 2 seconds
Just like changing a bicycle tire when I was a kid.
On todays episode of how to f**k up the lip of your wheel!
how so ?
@@wanalifyusofBy using those screwdrivers without applying the electrical tape at first. Stabbing a pointy metal tool against metal is a surefire way to gouge it, and long term damage it enough to create an unstable ride.
@@noseboop4354 if you watched the whole vid, you would see he has put tape on the screw drivers in the last steps where the force of rim and tires are teh most high.
@@mrbard1I think that's what he was implying that he only did it at the end instead of starting with them taped
Your taking a big chance on damaging that rim.
His rim his cares not for your input
@@rockfordhx2768 thanks for your uneducated commet.
How? Cause rubber damages rims😂😂
I dont know why I'm answering this, but spend 65 years in the automotive repair business then you'll see how.
@@billsomerset238 how does a tire machine put any less leverage on the rim?
“Doing this in real time!” Proceeds to speed up and make cuts in the video
It was pretty much real time, just didn't wanna make the video extremely boring .
Thanks for sharing the knowledge.
You bet!
How u gona balance it
FANTASTIC! Great video. Thank you
I grew up in a tire shop my family owned for over 30 years and its worth spending the $20 or $25 to have a tire put on a rim with a machine unless you just like doing things the heard way
I'm just going to pay the $25 per rim 😂😂😂😂
It must be nice to be a rich white republican Trump supporter to be able to afford that luxury. You people don’t even pay your fair share
Was gonna say the exact same thing gang
By me it's 20$ a rim and 60$ a tire I'll save myself the trouble 😂😂
Does the flat heads not scratch the rim tho?
They did.
When i seen the car he was workin on? I instantly got a headache. Now im gonna be up all night. SOAB
I’m watching this because the tire shop said they don’t have a big enough machine but I remember watching people install them manually when I was a kid
Poor rim tho
Put the electrical tape on the screwdrivers before you start to save your rim.
Will those fit a 6x4.5 lug pattern?
No
What about 30 and 35 series?
Where is wheel balance
He reckons it´s over rated.. 😆
All right
$5-10/ wheel at any auto shop or get balancing beads you put inside of the tire... Not entirely sure how they work, but apparently they work really well if the correct amount is added. They're like little BB's you put inside of the tire when mounting.
@34979Charlie at about 8:20 he says balancing is "in his opinion a bit over rated" lol
You are soaping the wrong side of the tire bead when installing the front of the tire on the front of the wheel.
Put the soapy water on the under side of the bead that's where its contacting the rim and it will slip on much easier.
What about yhe valve stem tho
I have a separate valve stem video
What a rim job.
Nice job !
Thx
Why does it look like your tires aren’t properly on the rim lol 😂😂
It's called Tire stretching, it's like that on purpose, all the cool kids are doing it lol
I would say that try bigger and wider, like 245/40-18" dont think it's possible with those screwdrivers
Thanks TH-cam
Remember tire has to come off first and thats a pain in the ass too without machine
Dit ging fout. Bij montage moet je te over het ventiel beginnen.
You should do it with the wheel face down. That way you only risk scratching the back of it!..
Unfortunately tires can only be mounted from the front.
If you try upside down, let me know what tps brand you buy, I’d like to invest
So if I do these one at a time same tire same side do I want to balance them
A cheap set of 16 inch tire irons would work way better than screw drivers
I can only find 24inch is that ok?
@@LadyVSC13 thats even better. More leverage 👍
@@GoBart454 sweet ty soooooo much for the info!!!
Really should us a tire bar.. this sucks no matter how you do it without a machine
I see a lot of rim leaks from this method.
Da bi vsaj vzel kakšen širok material naprimer montirač in ne izvijač.Tako je prevelika sia na površino in se platišče poškoduje.Amatersko delo.
it's easier to start with the inside because the rim is more rounded...
Washing up soap in a spray bottle would be a plus.
I use tallow but you have to pay a bit more.
Now try it on a real tire instead of that O-ring you call a tire.
Easier with bigger sidewall actually
Awesome! Now show me how to remove it 😂
I guess I will eventually
Tie down strap and 3ton Jack. Just watch the video
Scratching the rim with screwdrivers
Take a SERIOUS CLOSE UP of that rim edge while going around the circumference with your camera. I find it hard to believe you DIDN'T mar that rim even slightly.
With the money from the video, but yourself some tire iron tools!
I wonder if he used fairy liquid it goes further than ordinary washing up soap
Bravo
Need more water .
Two long ass pry bars would work better if you don't give a shit. Just start at one point and work it around on the last step and walk em
it HAD to be a VW guy fucking christ makes sense lmfao
But you can scratch that
Why am I wincing? You’re not doing my motorcycle wheels without protecting the rim.
Not every tire will work this way.
Just take it to a real tire shop
Лучше я отдам 10$ за шиномонтаж чем накоцаю диск. Так за эти 10$ еще и отбалансируют колеса.
Это у вас там 10 баксов. 😢 А тут 25 за колесо без балансировки. 150 и выше за 4 со всеми работами.
А, еще и записываться надо, и ждать два-три часа вместо получаса, потому что сезон, очереди, и только первого клиента начинают делать вовремя.
👍😎
Na...im good, I'd rather pay...
Hell no I’m doing to new rims. Never
🤌🏿on a 19x11😂
Damage done
Imagine a thin wall tire
Bye bye rim
lol no
This is ridiculous.
Only one percent of people in the world make over $30,000 a year, that's why this video is doing so good, it's for the 99% of us broke people.
Thanks for watching and thanks for the feedback ;)
U can't balance the tire. Lol
I’ll just paid that money and take it to the shop and have professionals do it
Only 1% of people in the world have money, that's why the videos doing so good.
Obviously if you can afford it and take it to the shop
This guy remind me ray from riding in cars with boys lol 😆 😂
For sure he damage the edges with the screw driver 😅he took the chance to do this video , didn’t know it would be this hard 😂. Dent with regrets , should of bring it to the auto mechanics😂
What about balancing it😂
Those screwdrivers on the rim makes me sweat 🫣
Don't do this at home please