Great content Jason! I have a 2015 precedent that runs on maintenance but not on operate. I’m thinking it’s the shifter micro switches that are bad. Any advice in the right direction would be greatly appreciated! Keep up the good work!!!
Jason maybe you can help me. I have the same problem you described however this cart was cut in half and stretched and the wiring harness was cut and is in a mess. It will not click and when I try to jump the orange wire and green wire it blows a fuse. I am thinking they have crossed a wire but I cannot find a wiring diagram on the 2013 club car Precedent gas cart. The wires plugging on the accelerator has 5 wires and I am not sure where they all go to see what is wrong. Any help you can give would be appreciated. My best friend bought this cart as is and I am just trying to get it running.
The fuse blowing is a sign that the diode is blown, as mine did just that. Diode is the the harness inside of the engine wall, wiring that goes to the pedal controls, mine is 2014 model precedent. Diode cost me $1.13. The diode was in harness near where the harness splits in 4 different directions.
Hi Jason. I have stripped the harness back to the wall of the body and have found no diode. Do I need to remove the body trim some how? I am new to club car so can you give me more details on the location of the diode? Mine is a 2014 Precedent gas
Found diode today its in harness near where Jason says but the harness turns and goes to pedal switches. Disconnect the choke lever and remove the trim along floor board. Its crimped inline then heat shrinked.
On the diode... How far along in the harness will it be, do i have to remove the body where the seat is at. Also, the link to the diode.... (2005 club car precedent)
We found this one right at the body on the inside so, you may have to strip the harness back to where you can see it? This is the first and only time we've had to look for one.
Great content Jason! I have a 2015 precedent that runs on maintenance but not on operate. I’m thinking it’s the shifter micro switches that are bad. Any advice in the right direction would be greatly appreciated! Keep up the good work!!!
Jason maybe you can help me. I have the same problem you described however this cart was cut in half and stretched and the wiring harness was cut and is in a mess. It will not click and when I try to jump the orange wire and green wire it blows a fuse. I am thinking they have crossed a wire but I cannot find a wiring diagram on the 2013 club car Precedent gas cart. The wires plugging on the accelerator has 5 wires and I am not sure where they all go to see what is wrong. Any help you can give would be appreciated. My best friend bought this cart as is and I am just trying to get it running.
The fuse blowing is a sign that the diode is blown, as mine did just that. Diode is the the harness inside of the engine wall, wiring that goes to the pedal controls, mine is 2014 model precedent. Diode cost me $1.13. The diode was in harness near where the harness splits in 4 different directions.
Hi Jason. I have stripped the harness back to the wall of the body and have found no diode. Do I need to remove the body trim some how? I am new to club car so can you give me more details on the location of the diode? Mine is a 2014 Precedent gas
We found this one right at the body and floor board. You'll see the track the harness sits in under the floor mat.
Where can I purchase this diode from please. I have many carts with this exact problem the golf cart dealer in my country doesn’t have it in stock
www.google.com/search?q=1n5401+diode&client=ms-android-comcast-us-revc&sca_esv=8d81eb85e01b5592&sca_upv=1&biw=360&bih=649&tbm=shop&sxsrf=ACQVn08o1v78O5zgDmJqn9bzwbXtVz8JIQ%3A1713878004102&ei=9LMnZoPHBZ7Ap84PsvWXyA8&oq=1n5401+diode&gs_lp=Eg5tb2JpbGUtc2gtc2VycCIMMW41NDAxIGRpb2RlMgUQABiABEjcK1D1Glj1GnAAeACQAQCYAYICoAH1AqoBBTAuMS4xuAEDyAEA-AEBigISbW9iaWxlLXNoLXdpei1zZXJwmAIBoAKCAZgDAIgGAZIHAzAuMaAHcg&sclient=mobile-sh-serp
Found diode today its in harness near where Jason says but the harness turns and goes to pedal switches. Disconnect the choke lever and remove the trim along floor board. Its crimped inline then heat shrinked.
No, it is inline of the harness right under the golf cart body and floorboard.
I have a gas president. Same issue, no solenoid click. I’m buying some of those diodes on Amazon. Hope it fixes it
Can you inform if it works because i bought some of those diodes from amazon and it didn’t work for me
I put a new one of those diodes in and it did not work.
It ended up just being a bad solenoid. 😂
Previous dude said it was brand new.
On the diode... How far along in the harness will it be, do i have to remove the body where the seat is at. Also, the link to the diode.... (2005 club car precedent)
We found this one right at the body on the inside so, you may have to strip the harness back to where you can see it? This is the first and only time we've had to look for one.
@@cartsmarttv Ok thanks
So I have to strip all the tape to find it
What way does the diode flow if by chance you remember
Pretty sure was front to back?
I took all the tape off and didn't see any diode. I am not getting any voltage to the front of the golf cart. (electric 48V)
Will need to back track from where you have power toward the key switch?
@@cartsmarttv I will try this evening
Cómo yo puedo comprar ese pedal de acelerador
www.ecartparts.com/accelerator-assembly-pedal-with-throttle-sensor-gen-2-club-car-precedent-09
where exactly did you find it?
Sorry we didn't show that. It is in the harness on the passenger side floorboard right at the body, heading under the seat. Hope this helps.
How could I keep my engine running when I let up on the gas pedal
You would have to change out your key switch and rewire the system.