The fuel foam is designed to a) stop fuel sloshing around when braking/cornering and b) to stop a flame front propagating in the event of an accident and fire. Removing it is dangerous. You should use an e85/alcohol rated foam instead of removing it. Many of the racing regulations I've seen make fuel foam mandatory.
Are the build need to meet certain rules? My 15 gallon ATL cell is about $1,500 alone and you need check or discriminator valve in case of roll over. The entire fuel cell especially for hatchbacks where these is no bulkhead to protect the driver in case of fire needs to build an metal enclosure to house the fuel related items.
You want two large fuel filters. Radium is a great choice. 100 micron between the tank and fuel pump and install a 10 micron between the fuel pump and fuel injectors. This is proper build edicate. Not sure why the young man thought foam had anything to do with fuel filtering? Anyhow it is a good idea to remove the ebay foam however replace it with quality E85 tolorate foam. The foam is to prevent sloshing that eliminates your fuel system from sucking air.
Use the stock fuel pump to trigger a hardwired relay to the external pump The hardwired relay should be powered straight to the battery..at least 12 wiring..10ga preferred
By chance can you lost a parts list? 40ft of -10 hose, in line pump, In line filter, cell.. but what about all the extra 45's and 90's. And such ..thanks
I know this video is a year old but whar tipe of fittings are those and what size i got the same tank and dont know where to order the fittings .thanks
What did you buy for the fuel cell for the rails and fitting sizes I need to run my lines a bit better and try to run a toggle switch for a push to start
Would using the top outlet as the return not cause bubbles in the tank or is that eliminated by the other vent? Also, how good is that fuel pump holding out to this day? I'm debating on ordering from the same brand but it's cheap so I'm skeptical
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
First one!!!
The fuel foam is designed to a) stop fuel sloshing around when braking/cornering and b) to stop a flame front propagating in the event of an accident and fire. Removing it is dangerous. You should use an e85/alcohol rated foam instead of removing it.
Many of the racing regulations I've seen make fuel foam mandatory.
The foam is used to prevent fuel sloshing.
Briliant work guys you make a great team and a wealth of knowledge 👏 👍
Very well made video. Super informative! Keep it up guys!
Are the build need to meet certain rules? My 15 gallon ATL cell is about $1,500 alone and you need check or discriminator valve in case of roll over. The entire fuel cell especially for hatchbacks where these is no bulkhead to protect the driver in case of fire needs to build an metal enclosure to house the fuel related items.
How did you secure/mount the cell to the floorboard?
You want two large fuel filters. Radium is a great choice. 100 micron between the tank and fuel pump and install a 10 micron between the fuel pump and fuel injectors. This is proper build edicate. Not sure why the young man thought foam had anything to do with fuel filtering? Anyhow it is a good idea to remove the ebay foam however replace it with quality E85 tolorate foam. The foam is to prevent sloshing that eliminates your fuel system from sucking air.
Nice work. Doing this next week. Has the fuel line rubbed through the steel braids at the rear lower control arm yet?
Can you show us how you wired the fuel pump? Thats what im stuck on
Facts
Use the stock fuel pump to trigger a hardwired relay to the external pump
The hardwired relay should be powered straight to the battery..at least 12 wiring..10ga preferred
What’s the link or brand to this fuel cell
Bro you need to make a video of the wiring I bought the same pump and I can’t find a dam video of the wiring
Is the red one a 15 gal ?
Helpful install. U guys should of used PTFE lines. No e85 for this car i take it?
Parts list??
What sending unit wire did you use that attached to that fitting and run it to the gauge?
Great video
By chance can you lost a parts list? 40ft of -10 hose, in line pump, In line filter, cell.. but what about all the extra 45's and 90's. And such ..thanks
I know this video is a year old but whar tipe of fittings are those and what size i got the same tank and dont know where to order the fittings .thanks
What did you buy for the fuel cell for the rails and fitting sizes I need to run my lines a bit better and try to run a toggle switch for a push to start
Would using the top outlet as the return not cause bubbles in the tank or is that eliminated by the other vent? Also, how good is that fuel pump holding out to this day? I'm debating on ordering from the same brand but it's cheap so I'm skeptical
Where you get the return line from the regulator
Did ta use an 10 all the way to and from?
That i foam is to keep the fuel from sloshing around.
@Autosauce I know this is a older video but what size fuel cell are you using? seems like it fits well
Yo I got the same fuel rail,how do you like it?
what size fuel pump are you using
Good job
Muy buen canal en comparacion ,Aqui hay material para los 100K plus subscribers...
Where’s part 2??
where did you source these parts? I cannot find them that cheap.. And nice job!
I don’t think running the lines threw the car is that dangerous because on the older Subarus they run down the inside of the driver side of the car
They are made out of a completely different material.
Man what state u from
Florida!
Where you based outta?
Lakeland!
@@Autosauce your a big inspiration brother keep it up
Second