K20 AWD CIVIC BUILD FUEL CELL INSTALL WITH STOCK SENDING UNIT (GAS GAUGE WORKS )
ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- Hey, thanks for checking out the video! Feel free to like and subscribe if you want to support the channel
INSTALLED A 10 Gallon FUEL CELL AND MADE MY GAS GAUGE WORK BY INSTALLING THE OEM FUEL SENDING UNIT 🤟
P.S. I SUCKED AT DRILLING OUT THE HOLE
Happy Holidays everyone 💙
Thanks for the info 👍. Going to be doing this with my 89 crx going awd.
Anytime Glad I can help 🙏
You need a pilot bit for that drill lmao
Should have tried spinning the drill before making contact instead of pressing down then spinning
Getting close man I bet your pumped.
Yes sir just about done🙏💪
Cant wait to see it on the streets
💪🙏 very soon
*@ **3:04** That's when he knew he f#@ked up* 😂😂😂
🤣🤣🤣
And that’s why you drill tbr center first
Very inspiring build! Did you ever install the anti slosh foam and pre filter for the fuel pump?
Pre filter yes
anti slosh foam no not yet still looking for one
Merry Christmas
Merry Christmas my boy 🙏
We need to get together
Is it work good? I plan to install it to my fuel cell too
@hondateam248 yea but I found a better option
I'm going to do this with my 98 rust bottom Ford mustang.the tank no good and everything is rusted bad but the trunk is good shape
Do you have to add anything in between that and the cabin or is it fine like that
It read correctly on the quage?
Yes
Isn’t there already a sending unit on the new tank that you can just wire in? Why the need for two? Of all vids I’ve searched and watched I only noticed you added the oem unit. Thanks.
Am using my factory cluster and there was a way to use the sending unit that came on the full cell I just could not get it to work so I did this and now everything works like a factory but there's a way 🙏👌
Where did you get the black mount for sending unit ? Integra doesn’t have that just a locking nut that locks into the oem tank
That's was off my stock 99 ek gas tank that's the Fatcory sending unit for my car
@@PunsGarage yea that’s what I was thinking ,started the search around to see if I can find 1 locally
Hey was this done out of necessity ? Or would the stock fuel tank work too on awd builds? I’m doing awd k24/20 integra thank u.
You can put the stock tank in the trunk but have to move it because it will be in the way of the driveshaft if u leave it in the original location
What size of hole saw?
2"
What diff mount kit?
Hub city