BUILD THIS LOADCELL HANDBRAKE | SIM RACING
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2021
- Build this USB Loadcell handbrake! This is an extremely easy-to-build DIY sim racing project which will give you a solid product once you're done! So go ahead and give it a bash!
Resources (Cutting Template, Code, Wiring Diagram): drive.google.com/drive/folder...
Parts list:
- 3mm Steel waterjet cut template: Found in resources
- 3mm Marine ply inners laser-cut: Found in resources
- Rosejoint/Rod end (1): za.rs-online.com/web/p/rod-en...
- M6x60mm (1): These can be found at most hardware stores
- M3x8mm Cap screws (8) - za.rs-online.com/web/p/socket...
- Mild steel M3x40mm standoffs (4) -
za.rs-online.com/web/p/stando...
- 6mm Aluminium rod (300mm) - www.amazon.com/dp/B07KJ71T13/...
- Quick-drying epoxy for the handle and backends
- Some paper clips
- furniture pads - these are found at most hardware stores
- rubber washers - these are found at most hardware stores
Electronics:
- 20kg Load Cell (1): www.amazon.com/dp/B096FKK8KS/...
- HX711(1): Included above
- Pro Micro (1): www.amazon.com/dp/B07PHK8SMR/... - ยานยนต์และพาหนะ
Wow! I am truly lucky to have stumbled upon your work! Interesting high quality projects with outstanding presentation! Looking forward to you next video!
Thanks so much!
perfect design! love it much
Very informative! Great video!! Have to try this. Keep it up..
Ty dude great job
Keep going with your channel, all good information
Thanks so much! I really appreciate it!
DMONEY!!!!! Amazing build
nice job!!!
Thanks!
Great video, I really like how you are making this hobby a bit more accessable to people. I hope you dont mind me taking your idea a step further by designing a 3D printable version that is loosely based on your design so that it is that much more accessable to people.
Hey thanks so much for the comment!! Feel free to mix it up! I would love to see it when you are done!
Hey man. Wondering if you ever finished this?
The amount of resources this channel has is outstanding, thank you for sharing all of this with us. I do have one question, I would like to build all the base parts by hand so I would like to print the dxf file as a template but I find it hard to figure out the size, do you have any suggestions on that? Would an A3 size paper be enough for this?
Thanks for the comment! Yea the parts should all easily fit on an A3 sheet
hi nice job, i have a question i put the ARDUINO MICRO scretch provided for you and the computer not know the arduino like a joystick have some idea how solve?
many thanks
best regards from Barcelona
Hi great video, but it’s not including the skrecht for arduino can you share ? Many thanks regards from Barcelona
Hello, I see it has been awhile since the last upload, Hope all is well. I would love to see what you could do with Pedals or the drive box. Anyway, I hope you upload some more Ideas, I live in the States and products are still a little much for me, and I prefer to make my own stuff. Also, ever thought about making a button box for ETS 2 or ATS?
Hello! Awesome build! i try to make same but i have problem with arduino. Can you help? Make some video how to set all right?
Bro really thank you for the amazing build!!
Can I use arduino nano instead of pro micro ?
Hey! I’m glad you liked it! To my knowledge the nano does support being an Hid device so I’d stick with the pro micro
What material are the side and bottom plates made of ? Im thinking about making it out of plywood as the standalls should make the body pretty rigid, am i wrong ?
Hey! I used mild steel, with ply it should be pretty rigid but will probably crack eventually
Hello, great job man, could you tell me which tool you use to cut metal?
Hi! I used my local water jet cutting store to cut the steel for my
Hello friend, thanks so much for the reply!
I’m looking at adapting a real drift handbrake I already have to a 200kg mavin load cell using a usb-c hx711. Is there any reason your software wouldn’t work for that. The only difference I see is the load cell rating (20kg vs 200kg).
It should work
Yup it should work, you might just need to play with the calibration a bit
Well, I bricked one of two Pro Micro boards..
And it's weird how the end product behaving: it's working 1-2minutes, then stops taking the signal from load cell and then shuts down.
The same thing happened with my first board and now it's bricked without any hope.
I'm a bit scared to use the second board for more than 2 minutes.
i think you glued the two boards together and it's overheating. Bricked ardu means it's software issue
Hi, have you tried this handbrake for the other sim games? Can we use this with all games?
Hi I’ve tried iRacing, dirt rally 2.0 and ac and works like a charm
hi, veryt nice job, i love it, but i have a problem with the arduino code, when i upload it, the computer don't recognizes as a game device, it uploads perfect, you know what's the problem?, thank you
Hi Jose, I’m not too certain. It sounds like the Joystick library may not have been installed correctly
probably same problem as me :) Try changeing the code from JOYSTICK_TYPE_MULTI_AXIS TO JOYSTICK_TYPE_JOYSTICK
Great video, im trying to build one myself but when i upload ur code to the arduino it wont show up as a Controller/gamepad in windows :S and i cant seem to figure out whats wrong :(
Hey Tom, sorry I missed this comment. Have you tried reinstalling the Arduino Joystick Library?
@@donnycrash8954 hey thx for answering :) i actually solved it just by changeing multi_axis to joystick :)
@@tomgliesmann7705 i need to try that ... because arduino don't show as a controller ... ill post how it goes...
@@tomgliesmann7705 it works 😁😁👌🙏
@@canyon46 solved?
I'm trying to compile but I get this: "compilation terminated.
exit status 1
Compilation error: Joystick.h: No such file or directory"
Any idea what I'm doing wrong?
That means you haven’t installed the Joystick library. You can find more info here github.com/MHeironimus/ArduinoJoystickLibrary
@@donnycrash8954 yeah, I realised that but did that now and it doesn’t show up as a joystick…
@@NerdyGurdyGuy
You need to convert multiaxis code to Joystick
@@NerdyGurdyGuy i actually solved it just by changeing multi_axis to joystick :)
What’s this game/sim?
It’s a free ride on Dirt Rally 2.0 in an Audi Rallycross car
Thanks a lot to share your experience and your work.
I have a problem checking the code before downloading:
"joystyck_default_report_ID was not declared"
has anyone already solved the problem?
I am a beginner in coding.
THANKS