I completely converted the regular engine to 4 cylinders from scrap
ฝัง
- เผยแพร่เมื่อ 16 ธ.ค. 2021
- This is the hardest project I've ever done, it took me a lot of time to plan and ideas to make it, hope you guys like it, don't forget to leave a comment below, and Share it for everyone to see.
#ledan #4cylinders
Part 2 You can follow it here
th-cam.com/video/Ga2Na2IcnG4/w-d-xo.html
Amazing engineering and machine work!
@@SvendsenWorks p
Super robota 👍 efekt końcowy rewelacja 👍👍👍, to dziewczyny są twoje 😁😂👍
You have awesome skills, but.... crankshaft is the wrong approach... use 3 cylinders next time... and a straight shaft underneath powered with gear. Think of using salad oil in the future... Have fun 🤣🤣🤣
nice bro
This what you call craftsmanship. Any kid with a degree or even a hobbyist can draw this engine out in design software and sent the data to the machining center. Using old parts to make this is incredible and takes skill that will soon be lost to the sands of time.
Sands lol
If you think this kind of craftsmanship is gonna be lost to time then your the only one that’s gonna be lost with time.
Repairs and replacement parts are still a huge part of the machining trade. This person has fixtures for each setup so this is not just something they decided to do once. They obviously build quite a few of these. And obviously there is a level of efficiency to it. If you think that it was easier or cheaper to build it from all new parts, that is how it would be made.
Not to mention the giant heap of old pitbike engines setting there. You can buy running pitbike motors for less than 200 bucks any day if the week brand new. It's a pretty cool way to recycle what they've got. But there's a reason they do it this way.
I keep hearing Alan Millyard saying: "I cut it off with my hacksaw, and it came out perfect." Most see old, greasy bike parts. The few see the potential, and have the skill to bring it to life. Fine craftsmanship here and no mistake.
I did too...
"perrrrfect" I believe is how Alan says it.
8میلیون تریبیون ابابیل د را برق
perrrrfect
@@svberend Just like that, bro !
Incrível o que você fez... Um motor com quatro cilindros. Adaptação perfeita.
Parabéns.
Я из России. Инженер по образованию. Всю жизнь проработал по ремонту двигателей. У Вас природный дар. Вы и конструктор- теоретик. Вы и слесарь- универсал. Спасибо за фильм. Успехов и здоровья.
Pure engineering planning and skill like that is a very rare thing, that's one of the most amazing conversions I've ever seen. Incredible work.
Saya juga takjub bos 👍👍👍
У него мозг работает лучше чем у 10000000000000000000 депутатов 😂
This dude is doing better work on the FLOOR than people in shops with special tools
Wiedza inżynierska na wysokim poziomie, szok!
I am so impressed beyond words! I have never seen such a combination of engineering knowledge and skill in anyone! Best wishes from Bangladesh 🇧🇩
This is devotion, skill, and self training at it's best, I've never accomplished anything quite like it, yet been in 100% control of nearly 1 million dollar projects. This man has talent.
Looked to me like a gigantic waste of time and money
@@krotchlickmeugh627 not at all a waste of time or money. He has millions of views watching the entire video. He made a huge profit off TH-cam.
@@4_Nik_8 you dint know how youtube pays its foreign creators do you?
@@krotchlickmeugh627 TH-cam judge how to pay the same way for everyone, if anyone get less or more money it's because of each country's taxes, it's not TH-cam fault. And even if this video get demonetized in which case it would be a "loss of money and time", this guy just showed off his skills and knowledge, that's something that could give him a better job in, who knows? any vehicle brand that you could imagine (well maybe not Tesla), just imagine putting this video in your LinkedIn profile
Erstaunlich.
Please make a multiple cylinder 2 stroke engine!!! Or maybe even v twin 2 stroke. V4 2 stroke. 3 cylinder 2 stroke. Twin 2 stroke. It doesn’t matter anything 2 stroke is cool!!! Good job. More 2 stroke engine please. 2 stroke lovers give me thumbs up. Let Le Dan see this!!
I'd like to see a 2 stroke V8 based on the Honda CR 500 which made 65+ horsepower from ONE cylinder, so an eight cylinder would be over 500 horsepower from only 240 cubic inches!
agree ❤❤❤
Allen Millyard motorcycles is your 2cycle motor builder way good
@@garykeenan3724
Настоящее инженерное конструкторское бюро в одном лице, великолепный мастер на все руки и светлую голову!!! Успехов и счастья!!!
This guy is wealthy enough to get those parts and machines in his private workshop, he can easily buy a 4 cylinders engine ready to use. However, he chooses to use his awesome skills in making the engine. Great performance.
Không nói tới độ bền và nhiệt độ. Điều bạn làm đã chứng minh bạn là người Việt Nam đầu tiên chế thành công động cơ 4 máy từ động cơ xe cũ. Tôi tự hào về bạn, chúc bạn luôn nhiều sức khỏe và tiếp tục thực hiện đam mê của mình. Vẫn luôn theo dõi bạn và ủng hộ bạn.
Tìm mãi nãy giờ mới thấy người vn
Tôi nghĩ đấy chỉ lấy video nước ngoài đăng lên
@@hoanganhnguyen4980 có thấy cái cân nhơn hoà trong video ko ?
@@hoanganhnguyen4980bạn nên xem từ cái video đầu tiên nhất của ah ấy rồi sẽ biết nước ngoài hay là VN.
@@hoanganhnguyen4980quê!!!
This video had me talking to the monitor and myself, outlining the issues that I knew had to be addressed to make this work, only to see you address those issues shortly after.
I don't know how long that will live, but that is some impressive ingenuity.
I do something very similar. At times have absolutely no idea what he's doing or why... But it becomes clear later. He certainly has some talent.
I always wonder how long these engines will last but of course that's not really the point. The fact they work *at all* is the impressive thing and anything after that is just gravy.
@@xxxggthyf The best part is that even if they work like a year tops, they can just be repaired. And probably vastly more easily than the first build.
I’ve messed around and worked on cars my whole life. This is on another level. Amazing to watch.
Hats off to this guy for his machining and welding prowess, not to mention his blueprinting ability. From my perspective, it would appear more advantageous to cast and machine a cylinder block and crankcase assembly than to chop up four cases and then weld and machine them together to make a complete engine. Perhaps, I'm just thinking mass production, where as he just wants to complete one unit in his small workshop. He may not have a foundry or casting experience, but if he did, he could turn out more of those precious little gems and even supply them to smaller frame builders for a profit.
Setujuuu bos
I think he did this more to show off his skills. The fact that he could do it.
If I was Elon musk or NASA, I would be trying to hire this guy. I bet most people who have a master's in mechanical engineering, couldn't even do this.
@@tayloralvidrez4342 Yeah cause mechanical engineering is not about using, it's about making them cause machinist aren't engineers. One can't exist without the other, stop shitting freely on people that aren't even evolve or talked about. PS : Musk is a fuckin fraud.
Setting up a casting mold for such a big thing and figuring that out fully is pretty hard if thats not your main field. Especially the internal voids.
He does it for entertainment and makes videos, but his work in Vietnam is illegal so he doesn't do it for commercial purposes.
This guy is gifted with supreme skills in machinery. You’re doing amazing work!
But very poor with casting 😁😁 he would have saved lot of bits and man hours simply by casting parts.
@@anshulbhardwaj4038 so you are greater than his. So where your video?
@@makhang2 the work I do comes under official secret act of India so I cannot upload it on you tube but I can tell you that in a nuclear reactor there are 64 temperature sensors with redundancy of 8 it means at every point 8 signels of temperature are generated and there are in total 64 of such points. Redundancy of 8 is highest as per IEC standards . IEC stands for international electromechanical council.
@@makhang2 one more thing if you look into a nuclear reactor pool you will find a blue glow coming out of water it's called cherenkov radiation.
@@anshulbhardwaj4038 then you got no proof to show me. Secret? My relationship with scandal is more secret than that.
機能するかどうかは別として、加工するのは驚愕したとか言葉にならないという表現ですね☺️
ものづくり得意そうだ！
I would not have believed that something like this was possible ( I have a manufacturing company) ; but watching this gentlemen design and machine this project left me stunned!
I am bowing down to his remarkable skills!
We don't even know if it runs
@@dedelabinouze5110 useless people will not know anything. Goodluck!
i've been fixing bikes for years, and this fella is just something else, what talent.
i am totally blown away and in ah of your talent on that lathe wow any thing is possjble clean and shine wow hulan ft worth tx usa lol
Mad genius ! Renovating one little engine would be a satisfying project ….. glueing 4 together ? Amazing !!
Quá cầu kì để làm ra được một con máy độ. Rất khâm phục và ngưỡng mộ anh ❤️ Chúc anh luôn thành công & phát triển hơn nữa. 👍🏻
Mak mapan yeh
Профессионал экстра-класса! Снимаю шляпу)))) Видео прям для души. Спасибо!
Показал бы пуск этого франкенштейна
@@Mr200megaton может ещё покажет, подождём))))
You’ve obviously done this before, the homage jigs are great! Great creative mod!!
I’d like to see the thing running in whatever you put it in!
Qúa đẳng cấp luôn bạn ơi,kỹ sư họ xem chắc cũng ngưỡng mộ chứ chẳng đùa.Hóng phần tiếp theo
You have seriously awesome building skills. I'd love to see how you engineered your engine conversions.
I am very, VERY IMPRESSED!
You are gifted people!
Respect and admiration for your WORK!
Greetings from Brazil.
That takes pure talent too do this this guy is definitely a top shelf Machinist
This is why I have so much respect for Asia and it's people
They just do their own thing and make the most of what they have.
Brilliant job 👌
Did you just assume his race?
@@SanjanaRanasingha no, just a geographical region
@@plumberman19 how did you assume his geographical region then? By the look of his feet or his home? Or workplace?
@@SanjanaRanasingha wew, he is Vietnamese. really making big deal about race? we asian does not care about your CRT!
@@SanjanaRanasingha I assumed his geographic region based on his ingenuity.
Does that hurt your feels😭
It takes a great skill to assemble a 4 cylinder crankshaft precisely with resources you have. Very inspiring and great work!
Especially with those safety shoes :D
Mil felicitaciones... Eres un maestro de la mecánica. Espero algún día lograr al menos la mitad del conocimiento que tienes...
Saludos desde Colombia, que gran trabajo haces , me impresiona la manera en la que modifica sus motores , y funcionan sin problema , que bonito arte tienes muchas felicidades y mucha suerte para usted , me gusta mucho ver sus videos , gracias
Beautiful work on the cylinders. It would have been too much work to fabricate a "one-piece" head, but that would be something nice to see in the future.
Phải lạy bác luôn , VN thấy mỗi bác làm dc 😊
Toàn nước ngoài khen bạn ấy , ở vn mình khó mà làm được điều thuyết phục được lòng của rất nhiều các nước trên thế giới , mà bác ấy làm đc thật là tài , mình xem video nào khen video đó
Cái hay cái tốt người nước ngoài xem hết cả. Còn người Việt Nam mình xem mấy cái xàm xí đú ko ah. Ko biết bao giờ ngóc đầu lên được với cái xu hướng của xh này nữa
@@kiennqnguyen6311 bởi thế VN mìnhmới chậm phát triển
@@kiennqnguyen6311 đúng rồi a cái clip như khoa pug NTN thì xem cho lắm vào lượt đang ký mấy chục triệu , mà clip hay như này k ủng hộ người nước mình
@@luischanel9539 cũng khó nói lắm
bạn, kênh kỹ thuật sáng tạo thường giới hạn số lượng người xem, con kênh hóng ha hóng hớt xàm xí thì đủ người :)))
Absolutely Incredible, what skill this man has.
Loving the straps used for clamping pieces down.
Làm cái máy V hôm trước 1 số người nước ngoài bảo đạo ý tưởng kỹ sư người nhật, giờ làm cái máy này coi còn bảo đạo của ai nữa ko, bái phục ổng ghê!
cái máy V lại chả phải dùng ý tưởng của ông nhật đi.
Cái máy V ông nhật còn chưa hoàn thành xong nữa
Real pleased I follow this chap I would love to have one of his motors he will go far good luck Le Dan ☘️👍😎
You're on a level with F1 mechanics. Amazing!
I can’t wait to see this engine running in some of your projects bro !!! Amazing and smart guy
Congratulations, the build is just amazing... We all want to see this engine working (!)
Came across this channel just a week or so ago. One off my favorite channels now. Keep it up.
amazing, salute to you my friend. success always for you
Những kênh như này thì lại ít người quan tâm chúc bạn mau phát triển mạnh và chế nhiều động cơ khác nhau k cần biết độ bền ra s nhưng bạn chỉ cần làm nổ máy và hoạt động 2 3phút cũng đủ là thiên tài...
Chúc a sớm phát triển sản xuất động cơ máy móc
Esse cara é incrível, parabéns!
Dude U are insanely talented.... somebody give him a raise and some cnc machines....damn
This is a real class talent. Would love to see it fixed in a frame and running.
Oh you want to see it run too? Asking a bit much I think lol
Probably the most satisfying engineering video I’ve seen in a while. I do think you should consider wearing protective footwear. One of those crankshaft flywheels could give you some substantial pain if it fell on your big toe.
đúng là tay nghề cứng. Chúc em luôn thành công trong công việc và sáng tạo ra nhiều sản phẩm độc đáo hơn
Luar Biasaaaaaa Ind. majuu ada org spt mu ms.brow sll berkarya Tuhan mmberkati
Роботы сделано очень много👏👍, удачи тебе в этом проекте, ждём первого запуска💚
Những cổ máy xe tăng cũng từ máy tiện thủ công tạo ra robot chỉ dựa trên kinh nghiệm của con người
WW2
O melhor engenheiro do TH-cam, LeDan meu parceiro Deus te abençoou grandemente com inteligência, melhor virabrequim que eu já vi.
Like67
Trabajo profesional en verdad que es artesanal me sorprende esa gran creatividad gracias por este buen video muy ilustrativo saludos desde México.
Ur videos are so relaxing no talking just calm music and machining
Spectacular, I just hope I can see that engine running !!
Thua bạn thật rồi, lòng nước CNC mới chịu :)
Bạn tính luôn phương án thay đổi thiết kế để lắp được cốt máy mà kg cắt lốc, quá ngưỡng mộ...
Không biết nói gì nữa chờ nổ máy thôi. Bạn có thể bán đấu giá cục máy này sau khi hoàn thành, biết đâu có người sưu tập đồng ý mua giá cao :D
quá giỏi b nhỉ. nắm rõ kết cấu, cơ chế phương thức hoạt động. quá khâm phục và đáng nể. nhưng phân khối tăng đồng nghĩa vs hệ thống làm mát cũ k thể phù hợp và 1 vài bộ phận lquan phải thay đổi theo để thích nghi vs cơ chế ms.
Just like stacking a rotary engine!! Super cool man thank you
những người thợ Việt Nam như anh có đầu óc và trí sáng tạo cao siêu đáng khâm phục
:)) nể mỗi phần gia công lên ý tưởng dựa trên kiến thức đã học thì cx dễ thôi
@@LipuWu nhiều khi ngta chưa qua trường lớp nữa
@@Phc156 uk nhưng thích mỗi phần gia công
Curious to know his training experience. Regardless this is incredible. He takes DIY to completely new level for me. I also would like to see it run.
@@noidontthinksolol yep.. firsthand experience is why college is a scam
He's probably a natural at this. Just has that kind of talent and vision.
แปลกใจเอาหัวเทียนใส่ตรงใหน
The best gift for this guy is a 5 axes CNC machine! Amazing skills!
It's pure joy to watch how you can turn a piece of junk into a shining piece of gold.
Nhìn giống máy ve chai mua về làm quá khủng quá đẹp dữ anh 😂😂😁😁
Monsieur, ce que j'ai vu de votre production était déjà magnifique, mais là, vous avez mis le projet (et sa réalisation) à un tout autre niveau! Vous êtes une belle manifestation d'humanité, d'ingénierie, de qualités professionnelles et de passion, et je vous admire sans retenue. Quand je vois vos réalisations, je vois l'humanité dans ce qu'elle a de plus noble, de plus "debout". Merci infiniment.
Crazy Genius Master craftsman
Trust me you were born for this.. with eyes only you can see the mm difference. My jaw is to the ground.
Oh my... This is purely a creation. I have no word to say...
Increíble. Lo que podría hacer todavía si tuviera herramientas más avanzadas aún. Muy muy bueno!
🚀
You´re a workful man, I hope bet you would find a nice job again!
Very good job brother, I hope I can be like you, greetings from Indonesia.👍
That's a sweet conversion. Are you using splash oiling on the pins? It will work for low rpm like under 3400, probably similar balance limit. Dual points with wasted spark firing is the easiest way to fire the plugs. Fires 2 plugs same time, one on squeeze one on blow. I love this stuff. He sees the end product in his mind and finds components that can be made to fit. Not to mention he is one of the greatest aluminum Tig welders in the world. If anyone has tried to weld on Chinese aluminum castings, they know how incredibly difficult it can be. Dan, bạn phải là thợ hàn Tig giỏi nhất mà tôi từng thấy. Những dự án này thật tuyệt vời!
Your so right cause that China metal is like tin foil lol he’s amazing skill lever is next level
0ppp
@@jesussavescars807 china aluminium is half scrap metal and half horse crap
Those werent gy6 they were honda
Those are Vietnam aluminium, yo...
What an incredible talent u have Le Dan👍🏻 keep it up,brother. May God bless u.👌🏻♥️ from 🇲🇾
I loved your great work so much that when an ad appears I watch it to the end support you😍🇮🇶
wonderful video my brother, congratulations and may God continue to bless you always
What the hell..!! You are crazy mechanic 😁
Next for part 2 i'am very curious 😲
Greeting from Indonesia🇮🇩
Bonjour j'ai regardé plusieurs video de vos transformations, votre savoir faire est exceptionnel et surprenant. Cependant vous n'indiquez jamais le gain de puissance , les résultats obtenus sur ces moteurs modifiés.
Or outre la partie usinage et adaptation, ce qui est intéressant, c'est de connaitre le résultat de ces modifications.
il serait bien de les ajouter ... Merci et bonne continuation.
Việt Nam 🇻🇳🇻🇳 giỏi quá ban ơi ❤️❤️❤️❤️❤️
dude! you're regular car engine manufacturer! WOW!
You are way to smart for TH-cam you need to be a engineer at Honda or Yamaha or something you are amazing
I agree with you 100% it's creative with passion this is degree project. 👍👍👍 This is enjoyment.
Great engineer, but dont forget he converted allot of ready made parts, but still quite a talent, you would be amazed at what you can do with a mill and a lathe.
@@aeroflopper I think the idea he think about this project enough and this group of engineers work. Well done.
th-cam.com/video/k6YgbDF0L7E/w-d-xo.html
Cc
Eres un artista, me saco el sombrero por tu talento 👏
Waaww luar bisa amazing ngerancang mesin 4 silinder itu sungguh luar biasa klu ga punya skil dalam merancang pasti ga bisa, mantap sekali bro teruskan merancang mesin2 lainnya. Selamat berkarya terus bro, semoga ada konten2 berikutnya yg wooww lagi
Salam berkarya salam sehat
Utterly brilliant le Dan well done great video great Engine 👍 👌 👏
Increíblemente hábil,idóneo y capaz,muy inteligente en cada parte del proceso
Super robota 👍👍👍. masz fach w rękach, tak trzymaj 👍👍👍...
im not even done watching this video but this is some of the most impressive enginering ive ever seen i gathered it was a dyi job that was well done !!
Mega Genial der Mann!
Alleine die Idee und das Umsetzen!
can't wait for the part 2 of this. i want to hear the sound of this 4 cylinder engine!
Me too
Em rất mong đợi động cơ này Chúc anh luôn thành công em theo dõi anh từ kênh cũ bị mất
Anh có trình độ và kỹ năng chế tạo máy thật xuất sắc!
Impressive skills genius idea 💡💡 long term experience is the key at this 😉🙂 home made and incredible patient 👏👏 goodjoob man!! Ur one of a kind, skill level 1000% do you have updates of this I wanna see if its works 🙏❤️
I just have to say again "WOW" the amount or precision craftsmanship that went into these parts and with what looked like mostly homemade tools is just amazing. The old saying necessity is the mother of all inventions sure does stand true here doesn't it? Outstanding work my friend just outstanding!!!!
That is a fantastic piece of engineering. I am a toolmaker myself. Greetings from Ireland.
your not a mechanic though .try starting it on one spark plug . slight flaw there.
สุดยอด ช่างไทยไม่เคยเห็นมีใครทำแบบนี้เลย
Amazing! McGyver would be proud of you!
Looking forward to the next video making the cam.
I think he'll use 4 original cams drilled out in the center and then put over a new shaft, then pin the different sleeves of the cams to time the lobes between the cylinders.
Looked like the crank pins were welded to the webs to stop them from rotating.
One big concern on the crank is balancing.
I'm also curious about what clutch and transmission he'll use as the original Honda 110cc transmission and clutch won't likely hold up for the ~4x increase in power.
I expect the transmission would be ok as the peak torque of 4 cylinders should not be any more than a single cylinder. However the average torque and power output is 4 times higher. This will generate 4 times more heat on the clutch.
คำถามของคุณน่าสนใจมากครับ
@@helixworld la idea no estan descabellada si se mantiene una temperatura adecuada; Con refrigeración asistida x radiador ó se mejora la calidad del material de fundición del motor.
Algo que me encantaría mirar rs el desempeño de este motor en subida y la aplicación de algún combustible con manejo de disolución de uranio.
@@helixworld When it's slipping it will get hotter, but it won't heat up 4x more. unless it can't hold the power then heats up until meltdown lol, still i have seen clutches melting metal of the flywheel and press, quite tough material that is.
i was wondering about the orientation of the crank lobes and balance as well. all the trimming and cutting definitely threw off the balance and i didnt notice any alignment marks or balancing process at all either.
Muy buen trabajo la verdad eres un artista con los motores,admirable tu trabajo,saludos desde argentina 👍 😉 👏
O cara é muito bom, mesmo não tendo em mãos as melhores ferramentas
Ya quisiera tener yo esas herramientas 😅
Pekerjaan yang rumit namun di hasil kan dengan kesuksesan
"SEMANGAT TERUS"
An incredible job. May not be cost effective but amazing skill and attention to build. This is old school equipment -