Rebuilding my rustfree 2006 GMC Sierra with parts from across the country
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- I think I need some more practice taking this truck apart. Let's get it apart so we can paint it and get it back together for what I hope is the last time. Then we can move onto fixing what the factory did wrong and what the last someone didn't get right. In case you were wondering, I hate headliners!
My website if you want to purchase a car or parts: www.vehcor.com
Amazon store: www.amazon.com...
For Vehcor merch: teespring.com/...
Nearly 41 minutes of sarcasm and education. Yep, it's Friday on Scott's channel!
Thanks!
The amount of poking at the Trolls is just perfect!
Saves me time reading their nonsense comments. 😂
I find it funny cause it’s not even are build and people are getting mad
"I don't always do things the right way" Thank you Scott, I feel a little better knowing I'm not alone! 🤣
That’s how you learn the right way! 😂
This applies to pretty much the whole human population, not only to those who admit to it.
In my experience... if you do everything by the correct, documented OSHA direction, it'll take twice as long lol.
Ware we can contact to you for prices on you work trocka please let me know buddy
I almost unsubscribed when you said you'll clean the windows later. You didn't disappoint when the DIRTY windows went back. Good job Scott
To be honest,if I have a window out of the car I'll clean it,even where it doesn't show.But that's just because I'm anal about that kind of thing.Also why it takes me forever to put stuff back together.
You certainly go all out with your builds to make sure everything is as good as possible, Whoever buys this "old" truck will get something much better than it would normally be. Looking forward to seeing it finished (hopefully next week). All the best from Queensland Australia.
It helps bring more money at the time of the sale and also keeps buyer whining to a minimum! 😂
@@vehcor Is this for sale?
Watching on TH-cam is awesome because it allows you to skip through the shortcuts!
I rebuilt a completely flooded out Suburban. It was a salt water flood and they said it probably got up to the dash. I found water damage under the headliner! I had to replace all the wiring, every switch, motor, regulator, dash, steering column, engine, and fuse box. What a long tiring job. Later I had to rebuild the rear end and replace the front bearing packs. Too much work!!! I have seen all of these areas before multiple times. I had to buy a rollover suburban body to get all the parts I needed. I really appreciate how much work this is!
You make it look so easy
Nah, these really ARE that easy.
The dirty window does dive me batty, but I Iove your content to much. 🤣🤣🤣
No one will ever know it wasn’t clean. There is no proof…. Oh wait…. 🤦🏼♂️
Out of all the vehicles I have watched you rebuild, this one is my favorite by far. Somebody is going to have a seriously nice truck.
Couldn’t wait to see this, just completed my own first wreck rebuild
Congratulations! We all have to start somewhere!
The sarcasm is what REALLY makes this channel worth returning to.
That and the knowledge of these gm trucks.
Thanks, plenty of sarcasm….. knowledge… we’ll see! 😂
I really enjoy that you edit it so well. It must take a lot of time!
i am amazed that you read all the comments. so since you do, some of us enjoy the way you do these rebuilds. keep it up. i will still be subscribed and watching!
I used to respond to every one of them until the Mustang brought on an unprecedented level of dumb comments. 😂 Thanks for the support!
@@vehcor i am going to have to look back at that one. i don't think i saw it. thanks again.
8:50 "remember to put your doors as far away as possible"....when I worked construction one a hole would park his vehicle as far away as possible. I couldn't figure out why....then it dawned on me one day when the boss told him to cut up some sheathing for a house with his circular saw. He took off his tool belt and went for a 15 minutes hike to get his saw. Made the cuts, then 15 minutes back to put his saw back in his vehicle. Then an hour later? needed it again, so off he went. He'd do anything to avoid work. For eg: we'd have our 15 min break or lunch and when it was time to get back to work THAT'S when he left to use the portapotty.....anything to get out of work.
Wow, now I know the easy way to get the door latch out. It's a bugger reaching in there to release the rod clips and stuff. I have to do it again to replace the switch on it, so that's great. Who says watching videos is a waste of time!
I try to share some of the tricks I have learned. Thanks for watching!
Another great episode, Scott. I appreciate all of your hard work for the new owner, one day.
That truck, or at least the tailgate, came from Hempstead TX which is 15 min from me! Pretty cool
“I hope I’m gonna clean that….” Classic. 😊👍👍
I love the casual implication of the "... drop it on the floor..." comment. Almost as if the natural location for the overhead console was on the floor, which may well be the case for most GM parts.
I never get tired of watching you rebuild Silverados and GMC's, somehow it's therapeutic watching these trucks being restored to their original glory, plus the humor that goes along with it is what makes even better, just like when I'm drinking coffee, when I add the Irish cream it makes it that much better. Giter done!
Crikey! A NEW old truck! Way ta go!!
I've redone the headliner in my 05 standard cab. One tip that Scott mentioned is be sure you glue both surfaces. the headliner board and the fabric. Ask me how I know? My truck is dark charcoal gray and I covered the headliner in Scott's favorite digitized camo! Actually looks great!
Like your style. Rebuilding a "wreck" is a great thing to do.
5:50 I was having a crappy luck day. Now my day is still as crappy as before, but I sure had a good laugh. Thanks for that!!
No problem! Hope this weekend gets better for you!
Liked the refinishing of the headliner.
Still lovin your commentary... dry humor ... no music ... clean freaks ... you are a quantum leap above the others ... but it is you tube so ... PLEASE keep going we love you
Rebuilding my 07 LBZ, managed to find a rust free box in a farmers field a week ago. Had 4 inches of leaf litter and mud in the box sides, but no rust. Trying to get that heat shield off the bottom before painting and those T25s won't budge, can't even find replacements since they aren't listed on the box diagrams. Hopefully it will be worth all the trouble.
I would just paint over it like the factory does. Never mind, don’t listen to me I install dirty parts! 😂
had the same problem on my 2006 sierra i drilled them out and retapped the holes then new bolts
About 30 years ago I helped an ex re-glue the fabric of her headliner back into place. Worked like a charm except she stepped on it while we had it out of the car. So she ended up with a pair of footprints right above the passenger seat. When her Dad saw them I’m not sure if he really bought her excuse.
Thought you were laying pipe instead😁
Scott, want to thank you for your all of your video series... my son hit a raccoon on the highway doing 65 and destroyed his front bumper and right front wheel well liner.. couldn't find a Pontiac G6 bumper replacement " how to " but after watching pretty much every one of your repair videos i was confident i could handle it and the best part is i NEVER realized i owned 2 bumper installation tools, both a right AND a left so i didnt have to stop the local Snap On truck and spend a fortune for them.... YOU ROCK and where the HELL has that lazy mr happy been
Looking good sir 👍🏻👍🏻
Thanks!
Enjoying the commentary. Tks for sharing.
Really enjoyed the video....I have a 2005 Silverado that is low mileage that the wife wrecked about 3 weeks ago that needs a cab now. Most importantly the wife and daughter are all right, they were sore for a few days, but not really hurt. Wish you were closer and I could hire you.
Funny thing I'm from West Texas you'll find trucks rust-free here all the time . In fact I can't remember the last time I saw a rusty car driving around here. Our problem is the sun most paint jobs don't last very long
Great job 👏🏼👏🏼👏🏼 Mr. Spoty was missing in action. 😂
Clean Freaks: Trauma Alert!
Great looking truck for being a 2006!
They should know by now that it is not safe here for them! 😂
Before I buy a car I always take it completely apart to check for cleanliness. Can never be too careful. If it can't be seen it must be clean. Words to live by.
Alright.. we have a video this week. Wasnt sure we were gonna get this quality entertainment...packed full of laughs and sarcasm. Im getting the popcorn ready and here we goooooooo. Thanks Scott. Have a great weekend
Thanks Scott 'i knew the experts were gonna reply' 😂😂
Happy Friday Scott!
Same to you!
Scott you should go have a chat with scott's GMC Emporium ! Tell him it's not doing a good job for you! Lol One thing I really do like Scott is your attention to detail. It makes a big difference!
Wife: Netflix and chill?
Me: No. Scott and sarcasm! 😂
Great job 👍 I like how you go the extra mile those little details that really separate a good repair as compared to not such a good repair thanks for sharing
A stiff bristle carpet power brush on a vacuum removes that foam in a flash and leaves almost no mess. It's like $4 on eBay to buy one and I highly recommend it.
I have an 06 at my place for parts, I'd be glad to donate what you might need for parts if I have it. It was rolled but interior is super nice, and runs and moves. 100% complete at the moment.
Well done fella👍👍
love these year trucks for removing doors way easier then any other year made 99-07 classic just lift off!!! .that color axially sprays out and matchless pretty good .
The painting gnome is the roaming gnome!
He has multiple jobs!
Love the sacrasm...Makes Friday more bearable.
If you're just doing a flat headliner, you can use regular contact cement from the hardware store, brush it on thick, roll your material out and press it down, then roll it back, let it tack up, and then roll it out again.
I did panels for my van that way. You just do it in sections nice and easy and it's held up fine so far.
There’s just not enough Kleenex in the world for the clean freaks. Keep amazing us as only you can do. Boring Build Friday was truly boring last Friday. It’s just not Friday without Mr Scott.
I am also doing a crew cab build here in texas. This video gives me some inspiration to finish mine off....
One hour in and three people don't like the way you do things. Good start for the container refilling!
It was the dirty windows! 😂
Man you do nice work
Thanks!
Love your work!
Still enjoying your content although I'm watching you a day later,just was busy🤗😎🤗😎
Missed you last Friday.
Hay Scott, Those parts of window glass is and was dirty "before" it was installed, every piece of glass on Camaros Corvettes, impala's their all dirty, they come from Corning Glass in NY dirty. The clean freaks are not up to the task of cleaning parts of truck that NEVER GET SEEN ! This is getting to be great rebuild. With Covid, buyable cars and truck are getting hard to come by. Dealers buy anything they can on Craigslist, smack 4K on it and put it on their lots. Crazy ! but again, a great video this time, Keep up the entertaining videos. Thank you
I’m currently in the process of rebuilding a neglected 2004 Silverado. Cab and doors are in great shape.
Everything else, not so much.
Starting with upgrading to power windows, mirrors, and locks this weekend from a donor truck.
Another great video from Scott’s GM Emporium channel!
Nice job. The truck looks good
Yet another great video
I really, really like this truck.
You should have cleaned one of the windows. That would have driven the clean freaks more than all four being dirty.
That really would have torqued someone. I am a clean freak (former detailer) so I would clean everything first, but have no problem with what he's doing - it's his channel.
Well done!good work…..no way I would even attempt doing this…. Hehehehe
HA, ok Scott, we will have to call you "The DOORMAN" from now on. Yes, off/on, repeat.
Do enjoy your videos though, it is fun to see you use tools I never heard of or seen before. I am from another era when things were all bolted or screwed together and seams were "leaded" over.
So watching you work magic with the parts to make a whole is truly fun stuff to see. Thanks for sharing! Keep Well! Rich
Nice job Vector, Nice truck you will have no problem selling it.
Oh my you didn't clean the windows what will we ever do lol 😂 and the Pizza girl wouldn't have left the rear vent underneath the carpet 🤣 great video enjoy watching keep the great work
If you need the little caps that cover the torx bolt on the front door panel, I have a bunch of them. I can mail you some
If only you cleaned the windows, that would add $500 to the selling price!
Thank you for another informative and entertaining episode. Always enjoy your videos. Thank you. Peace!
@vehcor I have seen headliner guys use a knotted wire wheel on a 5" angle grinder to remove the headliner foam. It went fairly quick.
nice work as always
Thanks!
That window would’ve closed so much better if it was clean. GEEEEEEZ!!!
Nice job
The headliner loks great Scott.I need to replace the one on my Avalanche,but probably never will.
You are a funny guy with the video editing 😂😂👍
I like how ya horass the clean freaks. keep it up.
Looking good Bro.
Thanks!
Great looking truck man I used to have an 01 Silverado with the 5.3 awesome truck and yes easy to work on those headlights unlike todays 😂😂😂
Another great job. Looks like new
From sea to shining sea
🇺🇸
I knew you wouldn't clean the glass
Scotty Kilmer uses silicone spray in the window glides so the glass moves faster and the regulator motor will last longer.
no gnomes were harmed during the making of this video.
Headliner replacement is a pro job 👍
Trailblazer doors mount the same way, the easiest doors I have ever installed.
Very nice. Gonna be a great truck for somebody....
Very smooth on the headliner... Very smooth. I like that.
I did one of those... You need to have a "pre headliner team meeting", if someone is going to help you.... Make sure they are doing EXACTLY what you expect them to do.... I kinda ended up doing the whole thing at once.... Don't ask. You are smarter to go half & half.... Mine kinda worked out fine, but there was 5 times as much stress, and you don't need that in your life..... Seriously, you don't.... Heh heh heh!
Haters be Damned! I really enjoy your narratives, and your Vlogs!
14:29 Was that a WhistlinDiesel reference to Monster Max? Lol
Your Aussie accent requires A LOT of work Scott. If you ever head over here, I'll happily be your coach, sound good cobba? :)
I've never thought "Gnomes" could be so helpful, we must have a different sort in the UK 🤣🤣🤣
Nicely done
LOL @ 8:00 = "Lift down"
😂
Great job on the headliner. I've done 3 Dodge Caravans the same way.
makes me chuckle to see you apply some wax oil inside the doors - its almost like your showing your customer care side - still need to work on the cleaning (perhaps you need a full latex outfit) - did you know if you clean the windows before placing back in the door they work faster !! many many points awarded
good to see an illusive gnome not hiding
I noticed you used headliner material that had the foam, normally people just use regular fabric that doesn't have the foam.
Here I am wasting my life as a sysadmin when I could be having a productive and much sassifying career like Scott.
I had an 06 avalanche that would just drop the plug out of the door speaker for no reason... Zip ties work great.....
I see nothing wrong with that repair!
Was I the only one who didn't see the beam holding the bed, and thought he'd photo shopped it to look like it was floating?