How Much Did it Cost to Turbo My IS300: 2JZ NA-T

แชร์
ฝัง
  • เผยแพร่เมื่อ 8 พ.ย. 2024

ความคิดเห็น • 252

  • @supraanon1914
    @supraanon1914 7 ปีที่แล้ว +75

    It’s cost me 1000 that’s with
    eBay manifold 120
    Wastegate pro gate 100 second hand
    Turbo holset brand new 300
    Oil return and feed 25
    Fuel return everything 40
    Intercooler 140
    Det3 ecu 180
    Downpipe 60
    So could be done cheaper but that’s only for 350bhp 10psi boost

    • @FlobbiJobbi
      @FlobbiJobbi 7 ปีที่แล้ว +1

      supra anon has it been reliable for you?

    • @supraanon1914
      @supraanon1914 7 ปีที่แล้ว +8

      Austin Ryser I’ve just built mine but done it many of times on my Supra builds 1.5jz with is300 bottom end and was very reliable.
      There s a lad in uk that builds is300 daily he uses the det3 and eBay kits and the first one he did was 2years ago and still strong running 350bhp.
      He’s the lad that’s tuning mine it’s all about the tune 👍
      You can find him on Facebook is300 turbo tuning. Ipswich uk he sells the kits on eBay aswell with the det 3 all ready set up

    • @FlobbiJobbi
      @FlobbiJobbi 7 ปีที่แล้ว

      supra anon thanks dude I'll have to check him out. I live in America sadly so i don't think I'll be getting tuned by him lol

    • @supraanon1914
      @supraanon1914 7 ปีที่แล้ว +5

      Austin Ryser there’s a lot of support with the det3 and a lot say it’s easy to tune and it’s as close to a stand-alone you can get in a piggy back.
      Dont be sad living there dude lol uk is a dust bin there’s nothing here nothing really going on I would move to America if I ever had the chance

    • @Toyota4Life
      @Toyota4Life 7 ปีที่แล้ว +5

      supra anon America ain't much better man.

  • @soildsnake1ak
    @soildsnake1ak 6 ปีที่แล้ว +122

    ugh my 5 speed blew at 4 psi about 260 wheel all gear lockout, the auto however been holing up for 3 years at 430whp and never misses a beat

    • @AndrewAbashidze
      @AndrewAbashidze 6 ปีที่แล้ว

      Which auto is that ?4 speed off a 2jz-ge ?

    • @gregnelson6180
      @gregnelson6180 6 ปีที่แล้ว +4

      Damn only at 4psi. What luck you must have been launching hard with really aggressive clutch

    • @gregnelson6180
      @gregnelson6180 6 ปีที่แล้ว +1

      And yeah your not neutral dropping like youve got a huracan anymore right?

    • @gregnelson6180
      @gregnelson6180 6 ปีที่แล้ว

      What rpm were you doing the hokey pokey with your left foot at?

    • @whocares5188
      @whocares5188 5 ปีที่แล้ว

      Lies

  • @scubagto420
    @scubagto420 6 ปีที่แล้ว +74

    Just build the block you don’t need a gte .. also u were wrong about one thing the auto is stronger the 5 speed it just needs valve body upgraded and if u want 500+ the clutch packs changed

  • @e85johnson68
    @e85johnson68 7 ปีที่แล้ว +17

    Gives me more motivation to boost my daily is300, thanks for the video! All good info to keep in mind while shopping for parts.

  • @alexmcdaniel116
    @alexmcdaniel116 5 ปีที่แล้ว +5

    Love your videos man. Bought an 03 5 speed is300 for my project this winter and you seem to be the only real build series on this car!

    • @C3GARAGEMedia
      @C3GARAGEMedia  5 ปีที่แล้ว

      Alex McDaniel thanks man. Congrats on the car. Let me know if you need aby help or tips. Appreciate you watching. Check out some of my newer videos. I just turned it up to 425 whp.

    • @Skimmitar88
      @Skimmitar88 5 ปีที่แล้ว

      @@C3GARAGEMedia hey do you use any other social media platforms? Would love to connect with you and work out some kinks with my IS300 build as well! Look forward to chatting with you!

  • @dsthez55
    @dsthez55 6 ปีที่แล้ว +4

    Your really humble and honest. Nice video, you mentioned dont turbo an auto is. which is contraditory to what all the forums say. I just picked up a 2001 auto and deciding the route i want to take...

    • @C3GARAGEMedia
      @C3GARAGEMedia  6 ปีที่แล้ว +1

      dsthez55 you can take any route you desire. I have personally seen two IS autos go one with nitrous (75 shot) and one on moderate boost 8psi. If you really want to enjoy the car and the power I say manual granted the w55 manual isn’t the strongest. However many manual tranny options are available for the is300. Thank you for watching my videos!!

  • @Joe-kx7bl
    @Joe-kx7bl 3 ปีที่แล้ว +5

    Very helpful. Was able to find a clean 2001 for 8k put another 5300 into it making it perfect again. Ready to start my build. 👍

    • @Knulll321
      @Knulll321 3 ปีที่แล้ว

      was it a manual?

    • @Joe-kx7bl
      @Joe-kx7bl 3 ปีที่แล้ว +3

      @@Knulll321 My left foot was blown off by a landmine. I could push it with prosthetic but would be difficult. It’s automatic

    • @Joe-kx7bl
      @Joe-kx7bl 3 ปีที่แล้ว +1

      Man I ordered the Greddy supreme exhaust back in May! They just pushed out production again till March. I keep hearing that’s the best for this car but a year wait really blows. First told me sept then dec now March. 😩 850 bucks is a lot of money to just have sitting out there in the wind

  • @jimmybones8452
    @jimmybones8452 3 ปีที่แล้ว +3

    What was the kit he suggested? Sprint turbo kit? Just starting to get into this stuff, what to slap a turbo in my 2005 Lexus Is300.

  • @zacattack45
    @zacattack45 6 ปีที่แล้ว +4

    A healthy boosted GE motor can handle 500hp stock all day long if done properly.

  • @Slippery_MOOSE
    @Slippery_MOOSE 5 ปีที่แล้ว +5

    Thumbs up for being legit and honest

  • @jdmcrxLS
    @jdmcrxLS 2 ปีที่แล้ว

    I appreciate you making this video. Very informative!!

  • @gregnelson6180
    @gregnelson6180 6 ปีที่แล้ว +2

    Watch one of jimmy oakes recent videos. He has a lot of luck with a $180 clutch/flywheel option. Should have paid the extra $200 for the full dual ball bearing. 0 smoking, 0 shaft play 40k strong. Please please please tell me how many km/miles you get out of that build before she pops. Research is vital. Evidence is out there. No ones designing the wheel here, just trying to keep it round.

  • @sergedenovo4873
    @sergedenovo4873 7 ปีที่แล้ว +11

    Per usual, good video.

  • @carnstar
    @carnstar 5 ปีที่แล้ว

    NA-T seems the way to go if you can shop and get some good deals and you are doing it yourself. Right here he spent like 6-7k as if someone took the time and buying the parts on a good deal they could have it all done with 4K-5500 which is definitely not bad, swap is very costly and most certainly worth it but you’re looking at 10k-12k if you are paying someone to do it 3k for the motor, trans, each on average and then shelling out install. If you DIY everything comes out cheaper but looks like NA-T is solid for the price and less of a headache then a DIY swap

    • @C3GARAGEMedia
      @C3GARAGEMedia  5 ปีที่แล้ว

      carnstar totally agree. If you look at my video a majority of this cost is clutch/flywheel and engine management. You can cheaply NA-T for like 2k. I wanted a system that was reliable and could expand on in the future. Also I noted list prices for my parts. I got many at far less than retail.

    • @carnstar
      @carnstar 5 ปีที่แล้ว

      @@C3GARAGEMedia its awesome you replied! definitely subbed to see more of your IS300. I saw the same CXracing kit you are talking about because im trying to NA-T my SC300 and right now the price has lowered from your 1500 one to the current one i believe is 820. I just dont like the turbo on it, but a turbo kit for 820 isnt bad at all! but its definitely a DIY NA-T for me. if i blow this motor ill definitely consider something like a swap, but id probably pay a professional at that point. what are your thoughts on the VVTI 2jzge vs the non VVTI 2jzge? worth it or not really a difference?

  • @tomwilkinson2307
    @tomwilkinson2307 4 ปีที่แล้ว +1

    I love watching Jason Nash's brother show me how to boost my IS

  • @leebowerman5836
    @leebowerman5836 7 ปีที่แล้ว +1

    2jz gte vvti from an aristo will also bolt straight in motor mounts are the same.

  • @adambuffington7491
    @adambuffington7491 5 ปีที่แล้ว +1

    so no compression test arp studs head gasket gte rods which would make it much safer and allow you to boost higher tuning local to me it about 2k min so its much closer to 8k to turbo a ge right around 10k to gte swap 1jzgte swaps i have guys swear to me would cost 6500 so for sure though ge head flows better

    • @whocares5188
      @whocares5188 5 ปีที่แล้ว

      6500 you could have a gte swap

  • @jd88gtr19
    @jd88gtr19 5 ปีที่แล้ว +1

    In all honesty, some people Have great results just using the kit and the stock ecu running 5 pounds of boost.

  • @rebelliondoor
    @rebelliondoor 5 ปีที่แล้ว +14

    You mines well got 2jzgte swap the price you paid

  • @adibee88
    @adibee88 6 ปีที่แล้ว

    GREAT CAR! This is HANDS DOWN one of my FAVORITE Toyota's ever built! When I was stationed in Japan, TWICE, One year a piece, First time- Okinawa, last time- Iwakuni or Yamaguchi Prefecture. Lexus, Acura, and Infiniti were not seen. It was Honda Integra, Nissan Sylvia, and Toyota Altezza. I would 💖💖💖 to have a REAL Altezza with a 2JZ swap! 👌⚡⚡ Thanks for the HONEST opinion, price and parts breakdown, and "Lessons Learned".

  • @zakarydixon
    @zakarydixon 6 ปีที่แล้ว +3

    Appreciate the honesty.
    You helped me out allot.

  • @EnormousDaisey77
    @EnormousDaisey77 5 ปีที่แล้ว +2

    Highly recommend reading a lot. can cut cost in half with fabrication and megasquirt

  • @jamiehill6041
    @jamiehill6041 3 ปีที่แล้ว +1

    Cx kit is 2700$ right now , I loved to get it for 1560$

    • @moza1956
      @moza1956 3 ปีที่แล้ว

      But quality for them have went way up so overall you’ll have a better set yo

  • @DirtyHammmer
    @DirtyHammmer 3 ปีที่แล้ว

    Helpful video, thanks for the information!

  • @Blink240sx
    @Blink240sx 2 ปีที่แล้ว +1

    4 years ago 1J would’ve been the better choice. Todays market ge all the day. 10k plus for a stock GTE is ridiculous.

  • @jameswells7754
    @jameswells7754 5 ปีที่แล้ว +7

    What’s the other turbo kit that you would recommend that already have everything? I know you said it on the video but I was having a hard time hearing it

    • @664rob9
      @664rob9 5 ปีที่แล้ว

      James Wells I’m in the same boat, wasn’t able to hear him

  • @sergedenovo4873
    @sergedenovo4873 7 ปีที่แล้ว +3

    Dude, as I stated in your unboxing vid., the CX Turbo kit is nowhere to be found. - The way that you presented it, complete with all the pieces, included. You can get the mani and some pipes(kit), then you have another kit with more things but not all together. The filter sandwich plate that they have, looks like it's only for a Miata. ...Maybe they started selling things differently, since then. But it wasn't that long ago! That's what I don't get.

    • @MrRaygsr
      @MrRaygsr 7 ปีที่แล้ว +1

      Hey nice video, I'm redoing my IS300 turbo I'm in the middle of the process. I'm not that good with the cameras but I will upload a quick video soon. If you are interested I can show my oil return system. It was a pain to get it right until I came with a really good idea.

    • @curtis2000s4
      @curtis2000s4 7 ปีที่แล้ว

      Rasputin 883 www.cxracing.com/products-by-car-toyota-scion-lexus-lexus-is300

    • @sergedenovo4873
      @sergedenovo4873 7 ปีที่แล้ว

      Thank you. :)

    • @killster245
      @killster245 7 ปีที่แล้ว

      id like to see

  • @GioGuitarDude
    @GioGuitarDude 6 ปีที่แล้ว

    It clearly says on Boomslangs website that the end user may need to go with a different cam and crank sensor to get it to work

    • @C3GARAGEMedia
      @C3GARAGEMedia  6 ปีที่แล้ว

      GioGuitarDude that was posted after my issue was diagnosed and a fix was found. That was certainly not there at the time i purchased the harness or i would not have purchased it. I worked with them for weeks to find a fix as did the shop i was working with for tuning. We even sent the harness back for them to diagnose and it still did not work correctly. Hence the reason i wired them my self. I do you work for boomslang you seem pretty defensive.

    • @GioGuitarDude
      @GioGuitarDude 6 ปีที่แล้ว +1

      Defensive? No, I’m in the process of upgrading the standalone and wiring in my 2jz-GTE swapped is300 and clearly remember seeing that on their website. If someone has a complaint about a product that openly addresses the issue beforehand, I’m definitely going to point it out. Whether or not they addressed that just because of your issue, I don’t know... either way I wish they would find a way to make it work.

  • @leebowerman5836
    @leebowerman5836 6 ปีที่แล้ว +3

    The auto transmition will hold a fair amount more power than the manual w58.

    • @664rob9
      @664rob9 5 ปีที่แล้ว

      Lee Bowerman no need to upgrade anything on the auto tranny?

    • @urnuckingfutz2
      @urnuckingfutz2 5 ปีที่แล้ว

      @@664rob9 yes you need to do a valve body mod (Google a650 valve body mod) and get an aftermarket trans cooler

  • @guywalker7220
    @guywalker7220 6 ปีที่แล้ว +2

    4 years of hard boost 23psi and auto is rocking cherps shifting at 70...do the shift kit deal...

  • @232Stangpwr
    @232Stangpwr 6 ปีที่แล้ว

    Ever figure out what that VVTI noise was? Please let me know If you did.

  • @zero01grimreaper
    @zero01grimreaper 5 ปีที่แล้ว

    Love the video bro.

  • @michaelm.a.4541
    @michaelm.a.4541 ปีที่แล้ว

    what brand turbo kit is mentioned at around 2:10-2:12???

  • @luischavez8430
    @luischavez8430 7 ปีที่แล้ว +3

    Build the bottom end of the GE(if you don't destroy it lol) and put a 1jz head on

    • @supraanon1914
      @supraanon1914 7 ปีที่แล้ว +1

      Luis Chavez my Supra was a 1.5jz vvti na bottom end 500bhp

    • @FORDPOWER2000
      @FORDPOWER2000 7 ปีที่แล้ว

      Luis Chavez luis can you tell me thr benefits of doing the 1jz head swap ?? thx

    • @supraanon1914
      @supraanon1914 7 ปีที่แล้ว +1

      NA_EddyG 1jz had rod knock so I put the 1jz on a 2jzge block I can say it was a lot better than a full 1jz cheap to build it’s in my vids in my Supra if you want to look but TH-cam 1.5jz a lot do it now days I was one of the first 10 years ago defo more aggressive

    • @luischavez8430
      @luischavez8430 7 ปีที่แล้ว

      NA_EddyG better flow of oil in the head and a slightly different exhaust tone

    • @CodyGraham
      @CodyGraham 6 ปีที่แล้ว +3

      Oil flow is IDENTICAL. There is zero benefit to a 1jz head, in fact, it flows less on both intake and exhaust sides.

  • @BickleBuice
    @BickleBuice 3 ปีที่แล้ว

    I realize this video is pretty old but, I found I can get a imported 2JZGT for 1250 dollars without a transmission or anything and I realize to get it turbod and all it’ll be about 9000 dollars withs transmission and
    All, or I can get a 2JZ GTE from Japan for about 6750 dollars that has the stock transmission still attached and all, and upgrade the turbo and a couple more things (both have about 30,000 miles) what do you think the best idea is

    • @Paranoid-loser
      @Paranoid-loser 3 ปีที่แล้ว

      Just listening to your options I would just say go GTE, save yourself the time and issues of building a n/a T and just get the already turbo'd engine, but that's just my opinion don't take that to heart

  • @jonjetleewayne1939
    @jonjetleewayne1939 5 ปีที่แล้ว

    I've been watching your build the cx kit comes with a gt35 but which one...I didn't buy the kit and peiced one together my self and used a gt3582r and a aem fic 8 piggy back and chose to build the block instead of a standalone so block has tomei head gasket and Crower rods and valve springs on wiseco gte pistons.... Do you think it could make more then 420 wheel with that turbo or would I have to go bigger.... Didn't build the block for nothing ya know

    • @jonjetleewayne1939
      @jonjetleewayne1939 5 ปีที่แล้ว

      All the engine hardware is also arp with king bearings I feel it should take 600 minimum and it's kinda the goal I set just don't know if my turbo and piggy back can make it

  • @guywalker7220
    @guywalker7220 6 ปีที่แล้ว

    By the way your maf sensor has air temp built in...tap that maf

  • @St.PatricksTrades2
    @St.PatricksTrades2 5 ปีที่แล้ว +3

    hey are you in Denver?? I live in Boulder County, always looking for more boosted IS's. I'm in an 01 GTE/5 Speed swapped.

    • @jakeriel9009
      @jakeriel9009 3 ปีที่แล้ว

      Yo I live in boulder too ur prolly not gonna see this but im going to buy a is300 soon and Id love some help building it up

    • @trilliamogdlocog4986
      @trilliamogdlocog4986 3 ปีที่แล้ว

      What ecu and tuner are you using in the area?

  • @guywalker7220
    @guywalker7220 6 ปีที่แล้ว

    i used kenny bell boost a pump with 750 cc none return running 65% duty at 23psi 7500 rpm kenny got this right...!

    • @C3GARAGEMedia
      @C3GARAGEMedia  6 ปีที่แล้ว

      Guy Walker thanks ill have to check it out. Appreciate you watching.

    • @UnapologeticIslam
      @UnapologeticIslam 5 ปีที่แล้ว

      C3GARAGE Media Thanks for all videos! Two questions for you...
      1. What was the kit you recommended in the video that comes with upgraded injectors and fuel pump? I’m looking to buy the most complete kit out of box.
      2. Why do you need a fuel return? The GE engines don’t require it, only the GTEs. Don’t you only need a fuel pressure regulator? Thanks! 🙏

  • @jakedominic5190
    @jakedominic5190 2 ปีที่แล้ว

    How much would it cost to turbo charge
    Corolla 09

  • @nema2182
    @nema2182 5 ปีที่แล้ว

    Great video thank you .what state you live in

  • @gregoryrobinson1004
    @gregoryrobinson1004 5 ปีที่แล้ว

    What do you think about the ecumasters det3 piggyback system for an nonvvti setup trying to touch 500hp

  • @jdmDC2ftw
    @jdmDC2ftw 4 ปีที่แล้ว +2

    @2:10 what did you say? Didnt catch the name of the company you recommended

  • @rkanimal504
    @rkanimal504 5 ปีที่แล้ว +1

    Would it have been better to get a gte ECU and run it that way

  • @mohgujai
    @mohgujai 5 ปีที่แล้ว

    Why the returnless system can't support more than 5 psi?

  • @Mycameron2323
    @Mycameron2323 5 ปีที่แล้ว +10

    That hat is ludicrous.

  • @garrettamaro9
    @garrettamaro9 6 ปีที่แล้ว

    How's it going man!
    Just got stationed at Ft.Carson but currently doing this install as well. We should meet up sometime and go for a drive.
    LMK have good one!

    • @C3GARAGEMedia
      @C3GARAGEMedia  6 ปีที่แล้ว

      Gar DUH thanks for watching! For sure. I also attend a lot of drift and drag racing events. Come check out the scene

    • @zero2sixtytv414
      @zero2sixtytv414 5 ปีที่แล้ว

      I was stationed at Carson I live in Pueblo west now!

  • @TheCachete33
    @TheCachete33 5 ปีที่แล้ว +1

    Who makes a full turbo kit ? Cant here it very clearly

    • @Korkoooo
      @Korkoooo 5 ปีที่แล้ว

      He has the CX Racing turbo kit. It costs around 1900 with the full intercooler kit along with the turbo and manifold etc. Go on their website and check it out

  • @jmastercha
    @jmastercha 6 ปีที่แล้ว

    very good video

  • @busyman411
    @busyman411 5 ปีที่แล้ว

    How did you sort out the vvti solenoid issue making that sound once it's plugged up?

  • @V7Cameron
    @V7Cameron 3 ปีที่แล้ว

    dang that price is the same amount I bought mine for with 90,000 miles

    • @C3GARAGEMedia
      @C3GARAGEMedia  3 ปีที่แล้ว

      keeping mind that is with a clutch, flywheel, and a top notch ecu.

  • @v8powergaming423
    @v8powergaming423 7 ปีที่แล้ว +5

    So it would of been cheaper and easier to 2jzge or 1jz swap?

    • @Mediogre_gymbro
      @Mediogre_gymbro 7 ปีที่แล้ว

      phoenix240 yea if you do a nat right it will cost pretty much the same to just do a 2j swap

    • @sergedenovo4873
      @sergedenovo4873 7 ปีที่แล้ว +3

      He's *got* a 2jzge, he'd be doing a 2jzgte.(already comes with a turbo set-up, stock) all you basically have to do is upgrade the turbo.

    • @Mediogre_gymbro
      @Mediogre_gymbro 7 ปีที่แล้ว +3

      Rasputin 883 and it literally costs under 5k to buy a motor and swap it yourself. So yes a full swap is the cheaper route and the same headache but less of a headache in the long run because you swapped a foged motor in

    • @sergedenovo4873
      @sergedenovo4873 7 ปีที่แล้ว +4

      I come across 2jzgte motors constantly for about 3000. But I'm always questioning their quality, you know? It would be hard for me to buy a motor for 3000, with a premise of "what you see is what you get" and "buyer beware". ...But I'm kinda bummed out cause of what he said that "If you have an auto, you shouldn't boost it", cause that's exactly what I have. ...But then again, I've read that engines are designed to support about double the HP that they come out with stock. Like mine (I think), stock is 215 HP, so I think, I'd be good for about 350, without fortifying. - But not much more than that(and it always winds up to someone wanting more), so I really don't know if I should abandon my boosted aspirations. ...This sucks, cause I'd have to swap out motor *and* the trans.

    • @Mediogre_gymbro
      @Mediogre_gymbro 7 ปีที่แล้ว +5

      Rasputin 883 dude he's not right right about that. Honestly the auto stock is300 trans holds more power then a w55. It's been proven. There is a few points he makes that are very questionable. I'm not an expert I don't claim to be but I know that the auto trans holds more power. They are made to hold around 400 ish

  • @piggylover1985
    @piggylover1985 6 ปีที่แล้ว

    Nice video. I have the same turbo kit from CXRacing, i like how the turbo manifold and the intercooler fit really nice. I have been running only 8psi on 440 injectors, stock fuel pump and stock clutch😂.

    • @alexofeliciano3034
      @alexofeliciano3034 6 ปีที่แล้ว

      Nghĩa Nguyen what ecu are you using?

    • @piggylover1985
      @piggylover1985 6 ปีที่แล้ว

      Alexander Feliciano at the time it was the AEM fic, but now it got the AEM V2 standalone, much much better.

    • @piggylover1985
      @piggylover1985 6 ปีที่แล้ว

      It has 550 injectors, and a Turbonetics hurricane turbo now, im waiting for an ACT clutch and turbo to break-in before another dyno-tune

    • @allturbo98
      @allturbo98 6 ปีที่แล้ว

      Nghĩa Nguyen how hard was it to tune with the AEM V2? How hard was the wiring?

    • @piggylover1985
      @piggylover1985 6 ปีที่แล้ว

      Allturbo98 :my tuner get it running in no time. The AEM EMS from Dezod came with the plug and play harness, everything plug in perfect, no cutting into any wires. The hardest part is where to mount the huge EMS 😂

  • @Jackieletits
    @Jackieletits 6 ปีที่แล้ว +1

    Hey man, what would you recommend if I was looking for 285-300HP? Could I run the setup you have with limited tuning and be happy? Im not trying to push enough power to blow up my stock manual tranmission so for now I'd like to hit just shy of 300. Thanks in advance.

    • @C3GARAGEMedia
      @C3GARAGEMedia  6 ปีที่แล้ว +1

      DesertDetailing thanks for watching my videos! An affordable kit like the CX racing kit i have will easily make that power. I would recommend a tuning solution of some sort like an Afc. I ran mine for like a day on stock ecu and it was wayy too lean.

  • @offlinemve5054
    @offlinemve5054 6 ปีที่แล้ว +2

    Where can I find the sprint kit

  • @gregnelson6180
    @gregnelson6180 6 ปีที่แล้ว

    Are you not scared that the vvti 2jz-ge can only withstand 250 horse comfortably whereas the non vvti motor can handle 450 more comfortably. Have a look into it. Your motor is going to go boom if you are going to run more then 4-5 psi for an extended period.

    • @z33avery30
      @z33avery30 6 ปีที่แล้ว

      vvti's break at like 300-350

    • @lukemramer1128
      @lukemramer1128 3 ปีที่แล้ว +1

      @@z33avery30 u good bro I 2jzgte cylinder head swapped upgraded cams,pistons, rods, changed the compression and I’m at 9psi for the past 72,000 miles at 512hp and am chillin

    • @lukemramer1128
      @lukemramer1128 3 ปีที่แล้ว +1

      @@z33avery30 also ar5 manual swap

  • @exoticus_gaming
    @exoticus_gaming 5 ปีที่แล้ว

    Did you go with gte internals or forged internals?

  • @titanuim271
    @titanuim271 3 ปีที่แล้ว

    Damn turbocharged a 2jz ge sound like a lot of work might as well get a 1jz gte or a 2jzgte

    • @SofiaSclafani
      @SofiaSclafani 3 ปีที่แล้ว

      2jzgte is about 6k to 8k not counting the cost to swap it and ecu/tune

  • @annon-ski7985
    @annon-ski7985 4 ปีที่แล้ว

    Can be done for much cheaper and much better.

  • @jameswells7754
    @jameswells7754 5 ปีที่แล้ว

    How’s the BOV from CX are they any good?

  • @TheV8Pumpkin
    @TheV8Pumpkin 5 ปีที่แล้ว +1

    Im assuming all this is possible to do on a gs300 as well?

    • @taylorwalters0626
      @taylorwalters0626 4 ปีที่แล้ว

      Zibby H yes it is. It’s all the same but a here and there differences like down pipe

  • @Joe-kx7bl
    @Joe-kx7bl 2 ปีที่แล้ว

    Can the auto handle the boost?

  • @sergedenovo4873
    @sergedenovo4873 7 ปีที่แล้ว +1

    1000cc you'll probably be only using 85% of their duty. I'd go with 800. You might be paying for leftover % that you won't use.

    • @devious762
      @devious762 6 ปีที่แล้ว

      Rasputin 883 rather be safe than sorry better to run rich than lean eventhough both are bad

    • @z33avery30
      @z33avery30 6 ปีที่แล้ว

      you shouldnt ever run wide open on injectors

    • @GroovesAndLands
      @GroovesAndLands 5 ปีที่แล้ว

      1000cc with handle 600whp on E85 with a 0.70 Lambda and be under 85% DC.

  • @shazebmohd7162
    @shazebmohd7162 4 ปีที่แล้ว

    Can I get complete kit ?????

  • @carazo321
    @carazo321 5 ปีที่แล้ว +2

    Why not just change to a gte head?

    • @carnstar
      @carnstar 5 ปีที่แล้ว +1

      carazo321 gte heads are super expensive even now, I haven’t seen any under 700

    • @mattsmith8770
      @mattsmith8770 4 ปีที่แล้ว +1

      The ge head in all honesty side by side the ge has more flow than the gte head it just the ge block has smaller rods that's why people do the swap cause the gte has stronger rods but if you upgrade the rods in the ge your better of that is the ge is300 block

  • @s.w.4174
    @s.w.4174 7 ปีที่แล้ว +1

    What complete turbo kit did you say is out for the IS300? Cuz when I search I only see XS,CX and SRT which I believe is out of business. A simple bolt on is all I'm looking for at the moment

  • @rolldog82
    @rolldog82 5 ปีที่แล้ว +1

    What about supercharged it

  • @jsonline3404
    @jsonline3404 5 ปีที่แล้ว +2

    @2:11 who makes a good one? spirit????

  • @pfcsire
    @pfcsire 4 ปีที่แล้ว

    I have no idea what to do with my stock is

  • @T07N
    @T07N 6 ปีที่แล้ว

    Autos could handle a lot of power. Not sure where you got that info from. Search the forums.

    • @z33avery30
      @z33avery30 6 ปีที่แล้ว

      they handle about 300-350 stock

  • @Austin_Torres
    @Austin_Torres 7 ปีที่แล้ว

    How much hp will the stick training hold up to ?

    • @C3GARAGEMedia
      @C3GARAGEMedia  7 ปีที่แล้ว +1

      Austin Torres not sure exactly. The w55 is not that strong.

    • @Yoknapataphaw
      @Yoknapataphaw 7 ปีที่แล้ว +5

      I hear the manual will only hold about 300hp. Auto will hold more hp I think.

  • @commptonn
    @commptonn 7 ปีที่แล้ว

    What are you going to do for a trans in the future after that w goes?

    • @C3GARAGEMedia
      @C3GARAGEMedia  7 ปีที่แล้ว +1

      Chase Compton I would like to cd09.

    • @CodyGraham
      @CodyGraham 6 ปีที่แล้ว +1

      cd009 has terrible gear ratios for any of the IS differentials - t56 is the way to go

    • @GroovesAndLands
      @GroovesAndLands 5 ปีที่แล้ว

      @@C3GARAGEMedia I'll have a complete R154 setup (bell, flywheel, clutch, slave, trans with marlin crawler parts, driveshaft, etc etc)available here in a few weeks, if interested...

  • @ikawwi
    @ikawwi 7 ปีที่แล้ว +1

    did you upgrade the head gasket or ARP studs?

  • @dah8rsluvme
    @dah8rsluvme 4 ปีที่แล้ว

    Why am I getting dizzy?! 😩

  • @mmohammadsana
    @mmohammadsana 5 ปีที่แล้ว

    cool video mAN

  • @ammoking6099
    @ammoking6099 3 ปีที่แล้ว

    Pretty sure a a340 canhandle at least 400 stock

  • @maikyprowelderleon3023
    @maikyprowelderleon3023 4 ปีที่แล้ว

    2jzge short block is better for turbo

  • @tagallstar1801
    @tagallstar1801 7 ปีที่แล้ว

    Did u have to change the internals

    • @chesh8349
      @chesh8349 7 ปีที่แล้ว

      TAGallStar no he hasn't he thinks they share the same internals as the gte

    • @C3GARAGEMedia
      @C3GARAGEMedia  7 ปีที่แล้ว +3

      Stock internals.

    • @C3GARAGEMedia
      @C3GARAGEMedia  7 ปีที่แล้ว +6

      k you are incorrect. I have never claimed they are the same as a gte.

    • @tagallstar1801
      @tagallstar1801 7 ปีที่แล้ว

      C3GARAGE Media oh mb I forgot the ? At the end of my sentence

    • @tagallstar1801
      @tagallstar1801 7 ปีที่แล้ว +1

      C3GARAGE Media I enjoy the vids btw. Keep up the good work

  • @whocares5188
    @whocares5188 5 ปีที่แล้ว

    Wow seems like a waste when you could have just put a gte and a stand alone harness and a cheap fuel pump.

    • @derekendres7176
      @derekendres7176 5 ปีที่แล้ว

      Chevy sucks true but a get would be really expensive even if you can find a solid one

  • @D58evil
    @D58evil 7 ปีที่แล้ว +3

    為什麼我看了以後頭就暈暈的?

  • @systemfroze8537
    @systemfroze8537 7 ปีที่แล้ว

    Do you have to worry about emissions? Becuz of turbo lol

  • @timm5970
    @timm5970 5 ปีที่แล้ว

    damn thats expensive

  • @JahnSmart
    @JahnSmart 5 ปีที่แล้ว

    213 times he said umm

    • @AnthonyLivesTwice
      @AnthonyLivesTwice 5 ปีที่แล้ว +1

      JahnSmart what are you doing actually counting

  • @Jdmjas
    @Jdmjas 5 ปีที่แล้ว

    Should’ve went gte buddy

    • @C3GARAGEMedia
      @C3GARAGEMedia  5 ปีที่แล้ว +1

      Kool Jass i am pretty happy with the nat i am currently putting down 425 whp at 9 psi been drifting like that almost two years going strong and reliable. This was a fun build and I am happy with the result

    • @nicholaskhan5632
      @nicholaskhan5632 4 ปีที่แล้ว

      @@C3GARAGEMedia hey bud are you running 430whp with stock internals?

    • @nicholaskhan5632
      @nicholaskhan5632 4 ปีที่แล้ว

      @@C3GARAGEMedia I've been looking around forever online trying to figure out the right safe spot for whp on a NA-T without going overboard, please help!!!

    • @nicholaskhan5632
      @nicholaskhan5632 4 ปีที่แล้ว

      @@C3GARAGEMedia do you think 330 who on stock internals is safe?

    • @nicholaskhan5632
      @nicholaskhan5632 4 ปีที่แล้ว

      @@C3GARAGEMedia whp*

  • @kacekace3676
    @kacekace3676 4 ปีที่แล้ว

    naaaaaa its cheaper then that

  • @camaro92026
    @camaro92026 5 ปีที่แล้ว

    OMG it sucks yes 2jz it.