Yeah I let my Argo project sit around for about the same amount of time after freeing up stuck rings. I recently got it back in the garage to continue that project. I'm just glad we're all gonna live forever so no rush getting back to these things, LOL!
Tip trick is to check over the bolts and nuts. Along with the screws just to make sure that they are snugged down tight so nothing loosens up on it while you're using it.
Hey man don't know if you read these comments but the Suzuki lt125 I seen 2 videos ago. You have to prime the crap out of the carburetor just to get them to start no fuel pressure no go. replace the fuel pump and primer diaphragms because I bet they are old and crusty(I did it in like 5 minutes really simple stuff) put some gas in the tank and prime it until the lever gets stiff and it should pop off I thought mine was junk until I did this hope this saves you the trouble
I wish you were my neighbor...between you and I we have some incredible equipment and projects.. My first project is upgrade for a harbor freight welder and my second is my Miller Bobcat that needs rebuilt(no idea what is wrong with it but it is poured out but that doesn't mean anything). I am going to try my hand at a board track racer replica before my 1928 Morgan/MG project...I have news about my Banshee powered 3 wheeler. I had a girlfriend who was an entertainer let's say. I had built an awesome 4 wheeler from a frame I found on Marketplace and put a Banshee engine in it. When we split up I had given her the 4 wheeler because she loved it and I was too busy working and had no place to store it...several years go by and I get a phone call out of the blue from this girl saying she was moving and she didn't have room for it and would I like it back.. Absolutely! Well I just had time to look at it and it is my frame whatever that was but now it has a TaoTao 4 stroke 250 cc engine in it. I just purchased a new carb and cdi along with some other stuff. I really need to start filming this stuff..thanks for sharing with al of us...Did you say you get to Pennsylvania much??
That square plug is for gear oil. That lubricates the internal ⚙️ gears inside of that power drive unit. That has hockey pocks and A adjustment screw to set the tension to engage the drive of the gear box unit with.
Put a v twin in it.. and set it and forget it. A 4 stroke with a good muffler and your troubles with be over. Save the engine for nostalgia. Just food for thought.
Awesome looking one!!
I agree! I think the attex have the coolest looks of a 6x6
Whenever I see these little Attex buggies, all I think of is The Banana Splits kids TV show. I always wanted one just because of that.
I need to buy enough of them to remake that.
Terra Tiger
Looks good fun. 😊
It is!
very nice thank you for sharing
Thank you for watching!
Yeah I let my Argo project sit around for about the same amount of time after freeing up stuck rings. I recently got it back in the garage to continue that project. I'm just glad we're all gonna live forever so no rush getting back to these things, LOL!
Lol on top of living forever things don’t get worse from sitting
Hellyea i remember watching the og cideo on this thing
Yeah finally wrapping it up
Tip trick is to check over the bolts and nuts. Along with the screws just to make sure that they are snugged down tight so nothing loosens up on it while you're using it.
Yeah…… you’ll see the importance of that in the next episode. Good foreshadowing!
Awesome 6x6
Thank you!
My buddy had one just like it and bro I'll tell you you'll play hell getting it stuck.
I think it’ll take quite a lot to make this thing stuck. Unless I high center it
Hey man don't know if you read these comments but the Suzuki lt125 I seen 2 videos ago. You have to prime the crap out of the carburetor just to get them to start no fuel pressure no go. replace the fuel pump and primer diaphragms because I bet they are old and crusty(I did it in like 5 minutes really simple stuff) put some gas in the tank and prime it until the lever gets stiff and it should pop off
I thought mine was junk until I did this hope this saves you the trouble
Thanks man, I read every comment usually, some of them like yours are really helpful!
I wish you were my neighbor...between you and I we have some incredible equipment and projects.. My first project is upgrade for a harbor freight welder and my second is my Miller Bobcat that needs rebuilt(no idea what is wrong with it but it is poured out but that doesn't mean anything). I am going to try my hand at a board track racer replica before my 1928 Morgan/MG project...I have news about my Banshee powered 3 wheeler. I had a girlfriend who was an entertainer let's say. I had built an awesome 4 wheeler from a frame I found on Marketplace and put a Banshee engine in it. When we split up I had given her the 4 wheeler because she loved it and I was too busy working and had no place to store it...several years go by and I get a phone call out of the blue from this girl saying she was moving and she didn't have room for it and would I like it back.. Absolutely! Well I just had time to look at it and it is my frame whatever that was but now it has a TaoTao 4 stroke 250 cc engine in it. I just purchased a new carb and cdi along with some other stuff. I really need to start filming this stuff..thanks for sharing with al of us...Did you say you get to Pennsylvania much??
Sounds like you have plenty of content for a TH-cam channel!
I don’t get to PA much anymore, I lived there for a few years though
That square plug is for gear oil. That lubricates the internal ⚙️ gears inside of that power drive unit. That has hockey pocks and A adjustment screw to set the tension to engage the drive of the gear box unit with.
Great info thank you
That sounds like A sachs 2 stroke snowmobile engine in that emphibiuos vehicle.
I think sachs and jlo are very similar
Don't forget to order yourself another new Headlight.,or A pair of headlights for new replacements for that to be able to ride it at night time to.
I actually did get a replacement set I need to get them installed.
I'm talking about the older Kohler command engines electric start starter.
I’ve worked on those before I think
The GOOLOO should get a torture test video by yours truly 😂
I’ll let you at the jump pack
Terra Tiger . Like on the Banana Splits
I know a guy local to me that has one. They are cool
That looks so cool I’d love to have one of those, also ain’t the tires on backwards or am I wrong
Allegedly they are supposed to face that direction on these for water purposes
@@WeldingandWheeling ohhh I gotcha but that makes sense now
Yes I say yes the tires are on backwards.
You may be right
Looks like maybe a seadoo 580 starter might work
That’s what the starter I was I think
If not the older Kohler lawnmower engines starters will work on those to with that squared starter and wide starter drive ⚙️ gear.
Got it. Thanks
Harbor freight has descent ultrasonic cleaners there. At reasonable prices.
I need to pick one up
Or A articcat snowmobile engine instead. The starter's should be interchangeable on both engines though.
Hmm I didn’t think of that
Put a v twin in it.. and set it and forget it. A 4 stroke with a good muffler and your troubles with be over. Save the engine for nostalgia. Just food for thought.
I have a v twin sitting around and it’s crossed my mind for sure.
How are you going looking for a skid steer?
I’ve been keeping an eye out for the right unit to pop up.
The vevor brand is not bad for A cheaper version of other name brands.
I have heard good things about them
your tire direction is backwards
I’m pretty sure they are actually facing the same direction as the original tires
Well kind of sounds like you oughta start with that driver then you want have to be saved
Not sure what you mean. But thanks for watching
Would be cool if you were my neighbor
I make a lot of noise I must warn you
@WeldingandWheeling wouldn't bother me a bit
I hate that same shop vac at work
It works I’ll give it that