Building an RC: Tamiya DB01 RRR (Time Lapse)
ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2022
- This is a time lapse build of a Tamiya DB01RRR. The completed build results are shown at the end of the video.
The DB01RRR was a limited production kit from Tamiya. It was released in 2015 and was the last chassis evolution of the DB01 line. It was designed primarily for the race enthusiasts (non professional racer) and serious hobbyists. It was one of the non-TRF (Tamiya Racing Factory) cars with the most potential in terms of track performance and tunability.
The DB01RRR has an interesting lineage and it all starts in 2006 when Tamiya’s racing division, TRF, decided to develop their first race chassis for the 2007 Off-Road IFMAR World Championship. That pursuit led to the production of the TRF501X, which was Tamiya’s first true race grade off-road 4WD chassis. As with Tamiya, experience from TRF trickles down to hobby and race enthusiasts products, and as a result, the DB01 was created as the everyday enthusiast’s or layman’s version of a TRF501X-as the DB01 inherited some of the TRF501X’s engineering and design. In 2007 and 2008 Tamiya released the DB01 under the Durga (58395) and Baldre (58404) kits. [Side note: the Durga name is from the major deity in Hinduism and Baldre I assume is the god from Norse mythology.]
The first DB01 variant inherited a simpler version of 2-belt 4WD drivetrain from the TRF501X and instead of an exposed drivetrain it was covered to protect from debris (since most enthusiasts will run the car on unpredictable surfaces-outside of a controlled race track). The suspension geometry in some ways was similar and uses a detuned version of the front and rear ball differentials. And with most of the materials on the DB01, it was downgraded to plastic compared to the TRF501X’s carbon fiber, carbon-reinforced, and aluminum parts. This was to keep the cost down and make accessibility to parts easier.
In 2009 the first R version came out, the DB01R. Some of the upgrades included high traction fiber-glass reinforced nylon resin frame, high traction lower arms, aluminum damper bushings, reinforced drive belts, carbon reinforced damper stay, motor heat sink, aeration dampers, aluminum suspension mount and blocks, slipper clutch, universal shafts, and full ball bearings.
In 2013 DB01RR was released. Some of the upgrades included high traction fiber-glass reinforced nylon resin frame compatible with square-shaped batteries (LiPo), high traction lower arms, big bore aeration dampers, aluminum suspension blocks and suspension mounts, slipper clutch, universal shafts, motor heat sink, carbon reinforced damper stay, reinforced drive belts, and full ball bearings.
And finally in 2015 the last evolution was released, the DB01RRR. Instead of the signature aluminum anodized blue hop ups from Tamiya, everything was anodized black (a rare thing for Tamiya to do especially when it comes to their top of the line variations). Upgrades included aluminum front suspension mount with a skid angle of 12°, aluminum rear suspension mount with a toe-in of 3°, motor heat sink, 12mm alloy hex wheel hubs, hex hub-compatible dish wheels, 39T pulleys, gear differential units, big bore aeration dampers, carbon reinforced rear uprights and damper stays, wide operating (WO) angle universal shafts and assembly, slipper clutch (different slipper plate), fluorine-coated ball bearings, hex screws, high traction lower arms, high traction fiber-glass reinforced nylon resin frame compatible with square-shaped batteries (LiPo).
The DB01RRR was suited for low or high traction surfaces depending on the setup. The belt drive provides very smooth acceleration and braking, and excellent cornering and handling. And the gear diffs allowed a more powerful setup and better durability.
I acquired this kit still in box (but beat up) some time ago from another enthusiast. For the longest time I debated if I should build it-because I already have a modified DB01 runner. In the end I decided to have two different setups-my first DB01 has a brushless setup and meant for abuse while the DB01RRR has a more nostalgic setup and meant more for the shelf. I installed a vintage brushed 11T 40K rpm motor and displayed Trinity race batteries. There are only a few aftermarket modifications like the underbody protector, stabilizers, wheels, and rear wing end plates as I wanted to keep it true to the original (and since it already comes with tons of upgrades). The DB01/TRF501X line is one my favorite chassis from Tamiya and I think every Tamiya enthusiasts should at least experience some form of DB01.
Additional Upgrades:
KO Propo BSx3-one 10 Grasper servo and KR-241FH 4-channel receiver
KO Propo carbon fiber servo horn
Tech Racing Japan 11T 40K RPM Super Cobra motor
MST XB60 ESC
Dual cooling fans
Pro-Line Racing Positron tires
Schumacher Honeycomb tires
Tamiya aluminum suspension balls, f/r stabilizers, f/r carbon damper stays
Square Japan aluminum spacers
Custom wheels, decals, endplates, under guard
It's a shame this guy stopped posting. Best build videos and mods around.
This is one of the best videos I've ever seen.
I can't stop looking at this RC car. amazing work
I’m glad YT suggested this video. I’m getting ready to move and thought about throwing out my RC collection. This made me change my mind 😊
Thanks for watching! Don't throw out your collection. If there are decent cars definitely sell it, some fetch a good amount nowadays
Wow. Masterful build.
Always so fascinated by your build! 👍👍
this guy is the studio g of rc cars great work
Great videos and builds! 👍🏼 It would be great to see a video where you present the different tools, equipment and materials you use.
Absolutely amazing and it’s the small details that count- the front wheels OMG!!! They finish it off in such an amazing way 👌🏻👍🏻
My thoughts excactly.
The forged carbon look = 100% drool-worthy !
Love the build and scanner work!
Thanks! And thank you for watching
Amazing , Your channel should not be called "Mechanic After Hours" but instead - " Magician All Hours " what you do to already amazing Kits is way far better than comprehension , Love watching REAL Talent .
Thanks, Andrew! I appreciate the kind words and thank you for watching!
I need to say it again… inspirational! Such a pleasure to watch and see everything come together like clockwork. Elite rc builder 👍🏻😎
Thanks and thank you for watching! :)
This was an amazing track car. Got some of my best times with it.
Stunning build. The black and gold go so well together. Reminiscent of the JPS racing colours. So clean. Awesome. 👍🏻
Thank you! Thanks for pointing that out, didn't even occur to me until it was mentioned :D
Amazing work as always. Thank you for doing this.
Thank you and thanks for watching!
Wow! Beautiful RC car. Great job!
Thank you!
What a beauty.!!! Keep them videos coming.!
Thank you and thanks for watching
You bring such a fresh perspective to the hobby. Thank you for continually blowing my mind.
Thank you! I appreciate the comment and thanks for watching!
Awesome build once again your vids have inspired me to go an purchase these kits, keep up the good work 👍
more videos please! really great.
Once again, killed it.
I love to get my wiring as neat as possible and you set the best benchmark.
I wish I had a plotter/cutter.
Thanks! And thank you for watching!
Another amazing build, colour scheme is fabulous.
Looking forward to the next one, job well done. Fantastic!
Thanks, Lucas! And thank you for watching!
Hey, hope you're OK Mr MAH. Turbulent times we know, but it's a little scary when we all sit here, looking for even more inspiration, and one of the masters of RC art goes more than 3 months sans post. U OK?
I wouldn't be surprised if this channel was so active the past two years due to covid19 and lockdowns. Most people are back to work now.
Hi. Thank you for the kind message. I’ve been abroad for a while but will be back soon. I’ll be back finishing up some videos. Stay tuned. Thanks again.
New videos please!
Man that looks good, like a spaceship racecar
Nice! Thank you for your hard work.
Thank you! And thanks for the kind words :)
We miss you. Please come back soon.
Amazing! You are such a talented builder. Your customisations are gorgeous 👍🏻 Congratulations.
Thanks and thank you for watching!
Every video of yours that I watch keeps mesmerized as I watch and learn from a master at work. Your knowledge and experience is second to none. Plus you have all the equipment needed to perform such mastery. I dream of having a car built by you.
Thanks and thank you for watching! Still learning as I go ;)
What can I say? Yet another stunning creation!!!
Thank you!
Stuning!! Thank you
Thank you!
Another stunning build like all the others. Absolute perfection in my opinion. Love all your designs and builds.
Thanks, Stefan! And thanks for watching!
I like the way you customize such a great car. It is already a super car but I am sure it is pure joy to modify it the way you do. Looks great and the way you did it is perfect as well
Amazing work!! Everything is perfect!!! Could you please give which body and paint were used ? Many thanks!!
DUDE I LOVE THIS CHASSIS!! I never run mine much anymore lol..Well done as always!!!
Thank you! Yeah, the RRRs are rare nowadays and I wouldn't run it as much too
Incredible as always
Thank you!
yet another masterpiece, thnx for the video!🙏🏾👌🏾🔥🔥
Thanks! And thank you for watching!
Insane as usual! Love it
Thank you!
Absolute Perfection - Your designs are beautiful mate. Such a joy to watch. Nick
Thanks, Nick! And thanks for watching
Your builds are so amazing to watch love the way you are so meticulous with every step.. brilliant 🤩
Thanks, Pete! And thank you for watching :)
beautiful
Masterpiece.
Another beautiful build! Hoping you do a bench and tools video soon, really interested in seeing your kit. From what we can see in the video you keep everything immaculate!
Thanks, Omar! I will try doing a video tools if I can but I haven’t had much time lately. Maybe one day
Amazing work of art , hope you are well it's been a long time since you haven't posted something.
Awesome man! This is on another level! Car looks amazing!
Thank you!
Mate, your builds are insane!
Thanks, Roland!
What a great car and build🤩. One of the best tips for me was the polishing of the sealed carbon edges. Wish I knew this before.👍
Thank you and thanks for watching! Glad that was helpful :)
As ever, another another stunningly immaculate build from you. I love what you do and really look forward to your videos. For me the build is an important and enjoyable part of the hobby, but in this day and age of 'all done for you' RTR cars it's increasingly difficult to find unusual builders kits - apart from Tamiya that is.
Thanks, Nigel! I agree, I sometimes find I car I like from other brands but most are RTRs nowadays :(
Although you are an excellent builder….and your attention to detail is second to none….there are many others with similar attention to detail, patience, and skill to produce similar results (quality wise) with a “kit build”……what really sets your builds apart is the changes you make. It’s not like you change things just so it’s different….anyone can do that….it’s the vision….you can see all these small changes needed….but also how they all compliment each other other. You only need to look at a thumbnail to want one of your creations….and watching a build only amplifies the feeling the want.
Honestly the only people making “anything” in the whole world on a par with yourself is “Singer”…..you’re like the RC version….but only better because you aren’t tied to one brand or model. I’ve always thought I had good taste myself, every car I’ve built I’ve thought was tasteful….and would prefer mine to anyone else’s….but I know if I built my perfect version of any car…..and turned up at a show…..and you turned up with your version of the same car…..you’d blow me out of the water.
Do you have a vision of how these RC cars will look finished? Or do you just come up with ideas as you go? Do you sketch it out or is it all in your head?
Anyway, I’m very happy I came across your vids…..like I say, more into full sized cars…..but to be honest your RC builds are not only better looking, but higher quality, less BS, and basically not vanity projects.
In all honesty, you should step up to a full car build…..I’m sure every one of your RC fans would follow along….and many new fans be gained. Don’t have to stop the RC stuff…..I mean being the best RC TH-cam channel why would you?
I’ve just decided…..I’m gonna hassle you about this until you tell me what real car build you’d love to do……I don’t wanna be a pain in the arse but to be fair it’s your fault for consistently knocking out amazing RC cars
Awesome awesome work on such a rare kit! Always enjoyed your build video
Thanks again, Graham! And thank you for watching.
Great build as always Marc. The level of detail raises the standard for many I'm sure. It certainly does for me. Looking forward to your TD4👌🏼
Thanks, Gary. I appreciate the comment and support! And thanks for watching!
Another amazing video and build. Keep 'em coming :)
Thanks, Matt!
Nice job!
Thank you!
Haven’t watched the video yet but the pictures look absolutely stunning my friend 🤩🤩🤩
Thanks, Glenn! I appreciate the words and emojis haha :D
That looks amazing
Thanks!
Fantastic build as always! :)
Thanks, Angelo! And thank you again for watching!
That was a nice way to spend 45 minutes this morning, lovely to watch! Every step of your work is a joy to watch, but I have to say I am amazed what you can do with that plotter! If you ever decide to do a tutorial, that would be a good candidate.
Funny, I just received a Durga body in the mail the other day, I still don't have any other parts, but sometime in the future I'll do a DB-01 build, a pretty simple one, sort of light on the upgrades. I always wanted to do a belt driven 4Wd, and this is the one I want.
And of course your car is a true inspiration, very well done!
Thanks! And thank you for watching. Hope you’ll enjoy the DB01! Yes, the belt drive is what makes it cool :)!
Wow!!! I salute you Bro!!!
Thanks! And thank you for watching
Always inspirational stuff to watch sir. What you do keeps the hobby thriving and by doing that you’re also changing lives. Mine included (1.5 sober) keep it up!!
Thank you! Congrats on 1.5 ;), keep it up as well! And thanks for watching.
That thing looks amazing :0 good job :D
Thank you!
Absolutely beautiful. I'd love to see how you'd build a Wild Willy or a Hotshot
How far do you tap the holes in the plastic chassis for the machine screws? Cheers.
The car is stunning! The whole process is just so satisfying to watch😍
Thank you! And thanks for watching
@@MechanicAfterHours You're welcome, your videos are so great, you really deserve more likes and subscibes
Astounding work.🙌😍
Thanks!
Thank you for having no test drive, my dopamine dropped down.
Thanks for watching! Sorry, it's mostly a build but there's a quick test drive early on
I‘m stunned. Really Good work, as usual. Love it. I thought a couple of days ago about which could come next. I would bet a Top Force. Never had this in mind. So im completly surprised and flashed.
Thank you! Good guess though, I almost built a Top Force but will save it for another day
Never thought to sand and polish the edges of the carbon shock stays after applying CA glue. Definitely going to try it on a future build!
As always, an amazing video and an incredible build. Thank you for video documenting and sharing with us.
Thanks! A very long time ago I learned it from someone who got me into RCs, he did this to his Yokomo 870c track car and the car didn't even have CF stays-but it made the edges look nice. I inherited the habit but only do it with cars I run often
Very nicely done! Love the overall aesthetic and attention to detail. My Tamiya Frog was black and gold, so l love that combination. Great to see how you do the custom stickers or decals and underside plate too. That electric screwdriver makes things easier too! 👍🏻
Thanks! That’s a nice color combo for the Frog too :).
Another stunning build. Would love to see a video montage of your RC collection.
Thanks, David! Perhaps one day I can do one
Just been through the first watch and this is probably my favourite you have done so far! It is stunning 😎🔥 Love the attention to detail you go to on these videos. You are the master and we are all the apprentices 👍🏻🙌🏻
Thank you! I really appreciate it and thanks for the support
Great job as usual. We have one thing in common: the super dog fighter you have as main picture of your channel. An absolute gem of RC history.
Thanks, Marco! Yes. Probably one that’s very special to me as the Super Dog Fighter/870c is the car that thought me many things about the hobby. I also think it’s one of the few true gems in the history of RC buggies
I just bought that same glove just because of this video lol.
finally a step up from disposable latex for my rc assembly sessions😁😁
thanks bro, keep it up!!
Haha! Thanks! And thank you for watching
A work of art 🤩😎👍
Thanks and thank you for watching!
So much awesomeness 👌
Thank you!
Omg this is super smart.
Badass black look
Excellent video again . Love the smoothness of the carbon edges after glue and sanding, really added to the detail of the towers, and of course the vinyl cut additions. Looking at that Super Cobra motor on Ebay - looks affordable!
Thanks! Yes, I think there’s that last 11T on ebay and it’s quite a good deal for what it is and being made in Japan
Legendary
You make it look easy , but most of us know how intricate and difficult it is to do what you’re doing. My next build is going to be a Durga and you just inspired me to think outside the box when I build it. Great job as always.
Thanks! Good luck with the Durga build! It's a very smooth car. And thank you for watching.
Thank you, i know now how to live my life!!!
Your builds are always so awesome. I have been building RC cars since 1980 (with some big gaps in between), but none of my builds even approach your level of craftsmanship. If you ever get back into filming builds, you should consider one of the many variations of the TT-02. Yes, I know that they have been done a lot, but I’d like to see your interpretation. There are so many upgrades, hop-ups and useless bling available for the TT-02 (or TT-02B, or TT-02D, or TT-02S, or TT-02Whatever) that building a unique model is possible, even for a duffer like me.
Thank you. I’ll consider that. I appreciate it
Magnificent build. Absolutely stunning. You have inspired me to make my own decals. Where do you get the clear adhesive sheets and vinyl? What brand and thickness? Thank you for sharing you incredible work!
man, tamiya has come so far since the old RC Hornet I used to have.
Thanks for watching! The Horney is iconic :)
@@MechanicAfterHours sure was, i also had the lunchbox van
Can I ask what the electric screwdrivers/ drills you are using in your vid’s? Thanks mate
Wann baust wieder????
Ich liebe deine Videos.
Gruß Christian.
Geile Sounds,geile Schnitte.
Einfach nur Geil Mann.
Gruß Christian
Hey I love the videos. I'm always excited to see your new uploads. It would be great to see another crawler build video. That was my favourite
Thanks, David! I hope to build one again one day. Just going thru some of my old kits but will see if I can acquire a another crawler at some point ;)
Amazing 👍
Thank you!
You are FAR FAR from Noob status. I don't think there is a title for your builds - just AMAZING!
Thanks! And thank you for watching. I've seen so many amazing builds and always feel I need to improve in some way. But of course making it fun for me is the most important thing
You’re the reason I got back into Rc cars after a decade. Thanks for your amazing efforts and for sharing your ART! Do you have a patreon ? I would definitely be a member if you have one or start one.
Thanks, Mario! And thank you for the kind words. Glad you're back into RC cars, just don't burn out ;). I don't have a patreon, unfortunately
I just found your channel. This brought back so many memories! Love the videos. May I ask what is the machine that you use to scan and cut decals/vinyl?
I love your work
Thank you! That Rasputin bootin video is awesome. Love the style and music
Siiiiick!
Welcome back Marc, I'm going to enjoy this :)
Thanks, Chris! And thank you for the support and for watching :)
@@MechanicAfterHours Incredible build as always, looks fast without even moving! Attention to detail is second to none! Take care my friend, until the next one :D
Thanks, you too!
Bravo!!!!!!!
Thanks!
gorgeous, so clean, and with the accents! May I ask what vinyl you used for the tower covers?
Wow! What a fantastic build. What machine are you using to cut the decals and under body sheet?
Could you do a video on how you make custom decals??
A treat from start to finish. Usually I skip during such long build videos until the end. But not on this channel ! The Durga is such a good car. And seeing the rare RRR version was just super neat 👍🏻 => RRReally well done, for a noob ;_)
Thank you! It's a great car but quite underrated especially for it's time. Thanks for watching!
i am new-ish to building models. as a kid i build some Gundams. But as far as RC's im new. I Love Your Vids! I am very meticulous as well and your videos are so relaxing to watch. A Master at work. A stumbled into a local hobby shop bc i was bored and after a few weeks im now there 5 days out of 7 gaining knowledge and picking up cool builds.
Thanks! And thank you for watching. Good luck with any new RC builds you have coming- they're quite fun!
Man I love your videos! Thanks for making this awesome content, would you consider doing a workbench and tool overview video? I'd be very interested in seeing what kind of tools and setup you have. Thanks again.
Thanks, Mark! I appreciate it and thank you for watching the videos. Maybe one day if I find more time. I will try.
Is that a Noob? Man that's a Masterpiece!!!
Thank you for watching!
This is a message to the RC-ELF: Attention: "RC-ELF"
I have thought about this for a very long long time and can not come up with a better kit to send to MAH. I and many others believe that giving MAH the Tamiya 959 in its original configuration NIB with the Iconic RS-540-VZ and the 3-step with BEC would be an amazing, wait,..... forget AMAZING, it would be record-setting #s territory.
Well that made me forget about crap for a while. Watched on in sheer mesmeration if that's even a word haha. You reminded me why I hate blue aluminum parts, minimal dark gold and metallic finishes look so much better!!!
Thank you! And thanks for watching! Yes, I do like a more minimalistic touch when it comes to the parts