How to replace spark plugs on BMW 650iX F13 with N63 engine / DIY / ASMR
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Parts and tools you can buy here:
www.amazon.com...
This video is about how to change spark plugs on BMW 650i F13 with N63 engine.
Replacing spark plugs every 50000 km can help to avoid multiple errors such as: misfire; low power; low fuel economy; check engine light.
Spark Plug PN: 12120037580
DISCLAIMER:
All the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All DIY projects entail some risk. It is the sole responsibility of the viewer to assume this risk. I'm not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Some of these are affiliate links, which means I receive a small percentage of sales/commission when you are shopping using my link. Thank you for your support!
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
Thank you! This is how ALL videos should be. Right to the point and not wasting time telling they're life's story.
Thank you for watching!
@@mikes.garage You're welcome. Are you in Tampa by chance?
No, I wish to live in Tampa ☺️ I live in Calgary, Canada.
Or any stupid music!!!
I was intimidated of doing this, I've done in other cars I had but not the 640. I will be doing this soon since you made it look so easy. Saving money is important...
Replaced my 2013 F06 650i spark plugs x8 with Bosch ZR5TPP33. According to mechanic it doesn't look like the spark plugs have been replace before, 123K km. Car idle and runs smoother and seem to fix my car problem where the engine sometime almost dies off when slowing to a stop.
Omg thank you for this video. Had a customer ask if I knew how to do it and I automatically said yes w/o actually seeing the work. Glad I didn't quote a price yet lol
Thanks for sharing, I wish you started the engine at the end.
Thank you for watching! I had a record of starting the engine but was thinking no one will need it.
This is a perfect video. Saves you $160hr labor rate. Learn the procedure and keep your money the bank!!!!
Thank you for watching!
You said you noticed that cylinder 7 has a leaking injector? Did it impact the car’s drivability?
Yes, I replaced the injector after the spark plugs, as it was misfire on cylinder 7.
Terrific video.
Thank you Taleb!
Hi Mike. I have a 2012 BMW 640i with 120k miles. The car is now feeling like it’s not getting enough power when I take off but runs fine. Can I service my transmission with out taking it to the dealership?
Yes, you can service your transmission by your self, but you need to have tools for this job. Also I don’t think it will fix your problem.
@@mikes.garage Ok. I have plenty tools its not slipping just doesn’t take off smooth.
I noticed the oil on the spark plug? Wht you didn't change the valve cover gasket as well? Thanks
No, valve cover gasket is still original.
Great video! 💖
Thank you!
Hey Mike! I’m getting a misfire on cylinder 8, and I’m thinking it’s time to do my plugs (they were done 25k ago by previous owner). Would you recommend also changing the coils too?
If spark plugs were replaced 25k ago, then your coils or fuel injectors need to be replaced. I guess this is the fuel injector in your point. You can try to replace coil from cylinder 8 to cylinder 4 and see if misfire will go to 4 cylinder if yes, then replace your coils if no then fuel injector need to be replaced.
@@mikes.garage thanks Mike! What if cylinder #4 is also misfiring now… 😩
@@keithmeline7485 try the same. Try to move spark plugs to another cylinder as well an see if misfire move to other cylinder. Two cylinders then maybe coils need to be replaced
I'm using a 12pt 14mm 3/8 socket but it doesn't reach the spark plug. Do they make a 1/4 in socket that works better
You need this kind of socket with thin wall and use extension www.amazon.ca/dp/B01JZ1NZH4/ref=cm_sw_r_cp_apa_glt_i_3X8J3JRR4W4XYCJPQKHS
@@mikes.garage thank you so much for the reply I realized I just needed a 14mm spark plug socket because there is no socket that can reach the spark plug other than a spark plug scoket...lol 😆
I have a 06 Bmw 650i with the N62 engine & was looking to change spark plugs & coils on it . Would these steps work for it also?
No, this is completely different engine. But spark plugs replacement an easier process then on this engine.
@@mikes.garage Thank you Sir
A question, when i start the car in the morning and go for a trip, it works fine untill i switch it off, the next time i start the car ( like 30 mins to an hour later) it shakes on start (idle) for t seconds then it works ok, when i move the car and go on slower RPM like stopping it shakes or like hesitates a little then ok again, however it’s been like this for a month untill today had a check engine light on the dashboard but nothing on the status screen, while everything seems to be working normally, is it the spark plugs or coils?
Sounds like you have misfire. This is could be spark plug, coil or injector. You need to read code and see which cylinder had misfire, then try to move coil to different cylinder and spark plug to another. Note for yourself where you put spark plug and coil. Erase code and drive the car again, scan it after and see which cylinder had misfire. If it the same cylinder then you need to replace expensive fuel injector which I think it is needed to be replaced. If it's another cylinder then you need to replace what you installed on it.
Thank u for your prompt reply, will check at the soonest and share whatever happens, hopefully it’s a minor issue not something major.
@@Lovintechmedia Thank you for watching! In this car I replaced all the spark plugs first. In a month I replaced all ignition coils. After one more month I replaced one fuel injector as misfire showed up.
I think will do the same 👍👍
Hello again, an update, ran into a computer check found a misfire error in one of the cylinders so have replaced all spark plugs + 2 coils one of them of the misfiring cylinder and another coil for a suspected one and gotta say that 95% of the issue is solved. There is a very little barely noticeable shake but i guess it’s normal or im probably hallucinating after all 😅 , thanks for the tip 👍👍👍
What is the gap required for the plug ?
Spark plugs should be preset. Different brands has different gap.
What did u gap the spark plugs to?
Gap should be written on spark plug box.
Gap 0.032
I have buy NGK is same with 23nm?
On a spark plug box should be marked with torque specs.
@@mikes.garage i cant see any information 😅
Then tight it to 23 Nm
@@mikes.garage THK you
Thank you for watching!