best engine i had the little yanmar absolutely bullet proof, the more you asked from it the more it gave it was always happy pushing my little trident along at full chat.
actually marine diesels they always say run at a fast idle , 1000+rpm after you start for good oil pressure and stop cylinder bores glazing as well as running too cold causing other wear issues.cheers warren
It's not like today's modern engines with extremely tight tolerances running 5w 20 synthetic oils. Starting a low RPM older diesel and reving it won't hurt a thing. A lot of diesel generators rev to full running speed right from first start no matter how cold the temperature is. They have no issues with with premature wear from harsh cold starts. 🖒
for the people rev when cold is bad, its a marine engine its always cold , it has always cold water from lake or sea ,so there isnt much of a warm up ,i have never seen boats get in water and wait half hour to warm up
Many year ago I had a Compac 23 with inboard diesel and yes it was an Yanmar 1GM. Dang I miss the engine and even more so miss that boat! April Moon was its name, would be interesting to find out where it might be? Hope it's being enjoyed as much as I did.
I'd take a 2-71, 3-71 or 4-71 with or without blowers.Heck,a 6-71 is available from 150hp to 1,200hp !Talk about different applications ! Detroit Diesel Corp knew what we needed,from 2 cylinders to 24 ,2 cycle diesels did any & everything our country needed! WOW!!!!!!
Hi, the red hose at the top is for what? My same engine when revved high begins to smoke and then shuts off, it's grey smoke. Any idea what that could be?
Throw a shaft and a Prop on it and take your picnic table out fishing LOL B TW i saw the motor on Ebay and the link didn’t work to the video so I just TH-camd it untill i reckonized the same Thumbnail the picture on Ebay had Ive always liked these Yanmars and i never know when ill need some in my next project boat
Do you know the reason for the clicking when you first tried to start the engine. Having a similar problem and guessing it's just a corroded connection.
The clicking is the starter motor's teeth grinding out of sync against the flywheel. It will cause either the starter to get jammed on the flywheel or will cause all the teeth to get grounded away.
It is not the teeth eating up the gears...smh it is one of a few things, the starter solenoid is pulling in, that is the click, however there isn't enough power to turn the engine over, while it may be true that the drive gear is moving into the flywheel from the solenoid moving, some starters do this some don't, it is not hurting anything, either the jumper cable connection was bad, which it looks like it was since he just reclamped it and it worked, it could be a bad connection, a bad cable, a corroded solenoid contact which happens a lot on boats, or a weak battery. Check those things and you will find your problem. One test is put a volt meter on the starter SOLENOID terminals, not the starter terminal after the solenoid, but the wire comming from the battery, and try to crank it, if it drops below about 10-10.5 volts it is a battery or wiring issue, if not its a starter/solenoid issue. One more tidbit, is that sometimes there is an intermediate solenoid and if that is the problem you will hear a click somewhere other than the starter, but get no power to the main solenoid.
The engine space would quickly overheat with a radiator. My Perkins diesel boat engine has a heat exchanger and extra raw water pump so there is regular antifreeze in the engine. The seawater cools the heat exchanger then goes out the exhaust. The heat exchanger is 16 inches long and 4 inches diameter and as an automotive radiator cap on it.
I have a boat with a 2.2 4 cylinder Indenor diesel and it just has antifreeze coolant that runs through 2 long pipes under the ship to cool it, no sea water!
My Yanmar sailboat engine starts at very low idle for 30 to 60 seconds and then kicks into normal RPM. When it kicks in big blast of soot leaves exhaust. Boat yard has already changed injectors and this did not help. Any thoughts?
Stephen Tuttle The manual from my boat’s diesel says to warm it up at 2/3 of Max rated RPM. I can’t bring myself to doing that but I do idle it about 1200 RPM till it warms up a bit.
The exhaust pipe has another pipe inside it which reaches almost to the end of the outside pipe. This inside pipe often rusts and causes trouble. Stainless Steel replicas of the OEM pipe can be bought for about $110.
crowmagg1 it's not bad at all. Its a marine diesel so the use of rubber exhaust length can be used without causing a fire, or risking a fire hazard as the water cools the hose
![[DRIP] ‘BILLIONAIRE’ PREVIEW](http://i.ytimg.com/vi/m0eXQD0gIeE/mqdefault.jpg)
I want one! Don’t have a boat yet, however I still want one.
best engine i had the little yanmar absolutely bullet proof, the more you asked from it the more it gave it was always happy pushing my little trident along at full chat.
It always important when starting a cold motor to rev the piss out of it maybe next time try mixing a little sand in the oil !!!
actually marine diesels they always say run at a fast idle , 1000+rpm after you start for good oil pressure and stop cylinder bores glazing as well as running too cold causing other wear issues.cheers warren
It's not like today's modern engines with extremely tight tolerances running 5w 20 synthetic oils. Starting a low RPM older diesel and reving it won't hurt a thing. A lot of diesel generators rev to full running speed right from first start no matter how cold the temperature is. They have no issues with with premature wear from harsh cold starts. 🖒
Lol
I've had great luck mixing water with the diesel. It acts just like water injection without all the hassle of a separate system.
actual it is on a new engine to break in a cam your suppose to rev it hi for like a hour
I love that sound, it means I'm not going to hit any other yachts on the way from the mooring😜
for the people rev when cold is bad, its a marine engine its always cold , it has always cold water from lake or sea ,so there isnt much of a warm up ,i have never seen boats get in water and wait half hour to warm up
They do have a thermostat which bypasses the water from the impellor out the exhaust so they do warm up much the same as any water-cooled engine.
Many year ago I had a Compac 23 with inboard diesel and yes it was an Yanmar 1GM. Dang I miss the engine and even more so miss that boat! April Moon was its name, would be interesting to find out where it might be? Hope it's being enjoyed as much as I did.
I had a Yanmar 155D tractor, great little 2 cylinder. Parts were hard to find, bought a Kubota.
Gotta hook 3 or 4 together to smooth it out
I'd take a 2-71, 3-71 or 4-71 with or without blowers.Heck,a 6-71 is available from 150hp to 1,200hp !Talk about different applications !
Detroit Diesel Corp knew what we needed,from 2 cylinders to 24 ,2 cycle diesels did any & everything our country needed! WOW!!!!!!
Runs smooth
That's a neat setup 👍
Runs nice for one cylinder, as good as my 2bd Isuzu.
Nice bro
That's it, rev that cold engine... "easy" is right. 0:47
ET CA DOIT PASSER SUR YOU TUBE NUL NUL
If it can't take it throw it away, it was not under any load
Needing to warm up engines is a myth. I’m not saying take a cold engine and put it under full load but you don’t need to be easy on them either.
@@integr8er66 It's called thermal shock.
Mantapppp.....salam dari indonesia....kalimantan tengah
I'd put that in a 12 ft dory type boat and off I'd go happily. Would even name the boat "PuttaPutta" after the engine sound 😀
Sounds like a Harley!
Sound good!
Sounds dam nice
Tractor motor
Verry Good modle ,Where can buy this engine and how much ?
Pure pollution, noise and vibration, Petrol companies will love you for this for you will always be dependant on them.
Nice
Intéressant pour le débit d'eau
Top Mn fica só ligado...
Hi, the red hose at the top is for what? My same engine when revved high begins to smoke and then shuts off, it's grey smoke. Any idea what that could be?
Perfect gokart engine
Throw a shaft and a Prop on it and take your picnic table out fishing LOL B TW i saw the motor on Ebay and the link didn’t work to the video so I just TH-camd it untill i reckonized the same Thumbnail the picture on Ebay had Ive always liked these Yanmars and i never know when ill need some in my next project boat
How much the price in the market now?
Mangrate video I would love to have that motor what horsepower is that thing or what cc is it it's really cool thanks for sharing
They are 9hp flat out when new
@@fraserlamb5787 very nice
@@Tampaboys I just got one myself. all the details are here www.manualslib.com/manual/791391/Yanmar-1gm10.html?page=8#manual
Do you know the reason for the clicking when you first tried to start the engine. Having a similar problem and guessing it's just a corroded connection.
The clicking is the starter motor's teeth grinding out of sync against the flywheel. It will cause either the starter to get jammed on the flywheel or will cause all the teeth to get grounded away.
Taking a look at the starter motor or the regulator might do the trick
It is not the teeth eating up the gears...smh it is one of a few things, the starter solenoid is pulling in, that is the click, however there isn't enough power to turn the engine over, while it may be true that the drive gear is moving into the flywheel from the solenoid moving, some starters do this some don't, it is not hurting anything, either the jumper cable connection was bad, which it looks like it was since he just reclamped it and it worked, it could be a bad connection, a bad cable, a corroded solenoid contact which happens a lot on boats, or a weak battery. Check those things and you will find your problem. One test is put a volt meter on the starter SOLENOID terminals, not the starter terminal after the solenoid, but the wire comming from the battery, and try to crank it, if it drops below about 10-10.5 volts it is a battery or wiring issue, if not its a starter/solenoid issue. One more tidbit, is that sometimes there is an intermediate solenoid and if that is the problem you will hear a click somewhere other than the starter, but get no power to the main solenoid.
Runs great🤣
Where did ya get it I want one
where to buy this engine?
Nice engine how much the a power hose
What is the idle issue you mention?
Like these guys have never seen this motor before
How much one pacced kompleted wite gear box
Preço?
Looks like that thing would shake an old sailboat to bits. Revving the balls off it smooths it out a bit though..
Good job
preciso de um aqui a Amazônia
Warter?
Good. Work
If they make a marine engine with out a need for sea water it would be so awesome. Radiator. Just like a car. Cooling fans. Etc.
The engine space would quickly overheat with a radiator. My Perkins diesel boat engine has a heat exchanger and extra raw water pump so there is regular antifreeze in the engine. The seawater cools the heat exchanger then goes out the exhaust. The heat exchanger is 16 inches long and 4 inches diameter and as an automotive radiator cap on it.
@@kimmer6 my swamp shark has a Chevy v8 on a 24 foot skiff. I run all day in the swamp and marsh. Needs no sea water. Stays cool all day
@@MrDavidelliottjr That's more airplane than boat. It would be a stretch calling that a marine engine.
I have a boat with a 2.2 4 cylinder Indenor diesel and it just has antifreeze coolant that runs through 2 long pipes under the ship to cool it, no sea water!
If Honda got into making small diesel engines yanmar,and Volvo would be out of business
Yet here we are! If Honda let nitwits like you run their company THEY would be out of business.
@@barriegrant7617 poor baby
I want this engin where can I get this
perfect
Manga boss Magkano may bangka wala pa makina 10hrs kailangan pwede ba yan
Nice sound...
💯👌
Model msin itu ada jual 4idak d indonesa bos
My Yanmar sailboat engine starts at very low idle for 30 to 60 seconds and then kicks into normal RPM. When it kicks in big blast of soot leaves exhaust. Boat yard has already changed injectors and this did not help. Any thoughts?
Me too...even after a rebuild.
Sticky governor, put some water absorbing additive in the diesel.
Talk to a good marine diesel mechanic
Berapaan harganya bos... Daerah mn
I will call it -
Old shake-E
About how much do these cost brand new?
cm
Don't push the throttle so much on startup.
มีขายที่ไหน
are you for sale sir?
อยากใด้เกียครับ
What is the name and type
Where this stuff is can buy, and what the cost?
I can buy
How much this engine
much?
bagus mesin ini berapa harga
How much?
La trasmisión
how much braderr
Saya dari Indonesia itu mesinnya diesel ya itu mesin mobil ya apa bukan
J'ai besoin de 2 moteur comme ça
How mach
Beli dimana berapa harganya
How much if I buy and send it to the philipines
you can buy yanmar in the philippines anyway, why waste money and effort to import.
where in the philippines? thank you.
Onde encontro para comprar ?
Que motor e esse meu amigo.,.
Price
Ok
Eso normal haría avanzar a una lancha grande para capacidad de pax 30😅
3 it was
Magkano p sir
что-то страншное по вибрации
how many HP
tandem compound 10hp usually
9 or Ten.
May nai bao nhiêu 1 cai
Quanto custa. Um motor deste
Olk yan sir
Yanmar 2GM is better 2 cylinders more torque
OVER VİBRATİON!
Its a single cylinder!!!
If you genius enough to rev up a cold diesel motor that has been rebuilt I see why it’s rebuilt.
super pickle diesels are not made to be revved like a car engine especially after rebuild and not warmed up. Complete idiots!
Stephen Tuttle The manual from my boat’s diesel says to warm it up at 2/3 of Max rated RPM. I can’t bring myself to doing that but I do idle it about 1200 RPM till it warms up a bit.
)
U
that water injection so close to the exaust port is bad
The exhaust pipe has another pipe inside it which reaches almost to the end of the outside pipe. This inside pipe often rusts and causes trouble. Stainless Steel replicas of the OEM pipe can be bought for about $110.
crowmagg1 it's not bad at all. Its a marine diesel so the use of rubber exhaust length can be used without causing a fire, or risking a fire hazard as the water cools the hose
SoloSail boat.Who? And learn English.
Q bosta isse motor
Good sound engine!
Nice
where to buy this engine?
Nice
Nice