Yeah I was mind blown. I have the same exact white one, it sits in our room not just as a secure safe but a beautiful masterpiece. They completely destroyed the paint on this one.
I see what you mean my “safety”. I tried to lean mine over getting it into my house. It fell on me and pinned me between the safe and the door. The whole weight was on my thighs and i could barely summon the strength the get out from behind it. Which beings me to why i am watching this.
Why didn't they haul upright with those furniture lifts??? Clowns to the left of us, clowns to the right of us. Picked up a similar Browning safe from garage floor laying on its back. Lifted with home fabricated lifts similar to those in this viedo. Slipped UltraLift powerd stairclimber underneath safe, set afe onto UltraLift. Hit the UltraLift power and set the safe upright. Easy peasy with Ultraift....even up stairs, into pickup bed, onto trailer. Bada oom bada bang!!!
As someone who has installed thousands of safes, this is how NOT to do it. Also, moving a safe on its side is fine with proper methods. Hopefully they have improved their methods since then...
Well I'll never use these guys. They scratched the hell out of it. Why wasn't it wrapped with plastic and blanket? Why didn't they close the door? Why didn't they use a dolly? Why do these jackasses still have a job? We may never know
man the one side is all tore up I'd be calling Liberty and telling them come pick it up and send me a new one. Why didn't any one engage the door bolts instead of letting it swing in the breeze glad its not my safe.
as a professional mover this hurts my feelings there's no reason that this should be a two-man job they should have at least three and I don't know why they don't have an appliance dolly it makes things so much easier two straps go around it at the top and bottom two guys tip back to you and you wheel it and it's pretty easy we moved about a hundred of em
1) put the camera down and help just stand it up in the garage. 2) BACK THE TRUCK INTO THE DRIVEWAY WITH THE GATE DOWN. could have saved 70% that work..
I have the same exact Liberty Presidential safe and just experienced terrible "SAFE" movers destroying the paint job !!! If their imaginary insurance doesn't fix it, I'M SUING !!!!
this guy literally cut out the part where they were struggling... serioulsy theses guys are going to get hurt. did anyone see the lift gate in that dude back.
Should not be a problem. Just don't do any crazy weights. 1100 lbs or less should be ok. If you are having difficulty moving it in, it might be too heavy. I think of safes like a refrigerator filled with milk and meats.....so you should be ok. Install the safe next to a wall, not out in the middle of the floor.
Should have pad wrapped first, then shrink wrapped to help keep pads nice and tight. Very unprofessional and unsafe way of moving these safes. Also needs more people to help.
Absolutely unacceptable If the safe maker or store that sold it sees this video your contract is gone. that safe in particular is not cheap that finish is somewhat rare atleast to me ive only moved 1 identical one in the past 20 years I can only imagine how the owner feels safes need to be blanketed at all times during transport good job scratching it several times and trying to blame the first moving crew.
Are scratches like that just something you have to deal with/expect when buying a 1500 lb. safe? Or are movers/deliverymen expected to not damage the exterior?
We will sometimes wrap the safe with shipping blankets....Also, there are alot of risks when shipping a heavy safe, because if you hit something, it will leave a mark....!
now I get it mask around company logo guy is because of the embarrassment Do yourself a favor before someone gets hurt, get out of the business and let professionals do it!
why are you guys doing things the hard way? 1500 pounds ain't crap for a safe. I've moved ATMs that are heavier. standing up on to a pallet jack? really
Absolutely Ridiculous! 1,500Lbs/2 persons^downhill forces= Lawsuit for back injury. +750Lbs/per person. Pretty sure that violates OSHA standards. Now that the human aspect is covered, let's talk about moving practices. 2 People? Oh, plus 1 camera man/business owner. No assistance when it almost flipped, no moving blanket between pallet jack and item, and NO STEEL TOE SHOES? WTF!!? The other thing, why would you take the safe downhill to the truck when you have a lift gate? Are you that devoid of common sense as a mover/business owner? Let me Re-edit the description for the video; "I was called out to finish this safe moving job. The last safe company left this safe on its side. We up-righted it and anchored it to the ground. I did a $#!* job, almost if not created lifetime injury for my employees(who I secretly don't care about, but pretend to), and I'm an idiot for posting this on the web because it can never be removed."
So many bad comments with out backing/ providing a better solution. Comments like “they completely destroyed this safe”. Hahahaha… this video definitely provides a good solution to move a very heavy safe on it side with out damages.
Fail cowboys just luckier than the bozos that first deliverd. No plan or prep should have stood up with out pallet truck. Much safer then pri bar and blocks to put on pallet truck also 3 guys min for that job you guys are gonna get hurt cutting corners.
I feel so sorry for the owner of that safe!
Good Lord! They destroyed that thing. Why would you share this? This is the last company I’d ever call to move a safe
amen, they ruined a safe, not moved a safe
Yeah I was mind blown. I have the same exact white one, it sits in our room not just as a secure safe but a beautiful masterpiece. They completely destroyed the paint on this one.
I would not accept it into my house in that condition
ALL SCRATCHED TO SHIT! HOLY FUCK, YOU GUYS... Note to self- Don't NOT call OutLaw Safe Scratching Company... Fuckin' IDIOTS.
Have moved up to 5000 lb safes. Never move safe with door unlocked. Always remove spindles. Very unsafe .
"work smarter not harder" was not implemented here...
Both companies did a terrible job, must have forgotten there big boy pants at home.
Why are you posting what NOT to do?
Mario Przepiora 😂😂
Those scratches on the sides are free of charge.
Star wipe.
"Chef's kiss......."
These are not professional safe movers.
I see what you mean my “safety”. I tried to lean mine over getting it into my house. It fell on me and pinned me between the safe and the door. The whole weight was on my thighs and i could barely summon the strength the get out from behind it. Which beings me to why i am watching this.
Why didn't they haul upright with those furniture lifts??? Clowns to the left of us, clowns to the right of us. Picked up a similar Browning safe from garage floor laying on its back. Lifted with home fabricated lifts similar to those in this viedo. Slipped UltraLift powerd stairclimber underneath safe, set afe onto UltraLift. Hit the UltraLift power and set the safe upright. Easy peasy with Ultraift....even up stairs, into pickup bed, onto trailer. Bada oom bada bang!!!
They safe should have been Padded and wrapped.And never turned on its side.
Wow stay the F away from my safe
the majority of this video was cringetastic. I really hope you aren't proud of the methods portrayed
rinzler right that safe should have been shrink wrapped
I would never hire these guys!!! Jesus Christ!
Very impressive that only two guys moved that behemoth. Good job guys.
not that impressive
Just moved one in my home this evening. My son and I. A little common sense and it goes much easier without harming the safe.
Multiple inclines as if the job wasn't difficult enough. Thank goodness it didn't get loose and roll across the street and down that hill!
As someone who has installed thousands of safes, this is how NOT to do it. Also, moving a safe on its side is fine with proper methods. Hopefully they have improved their methods since then...
Should have been titled: "How NOT to move a safe"
3:16 Jeebus is right! Holy crap! My a-hole is puckering right here.
after watching the video you guys should not be moving safes someone will get hurt.
Well I'll never use these guys. They scratched the hell out of it. Why wasn't it wrapped with plastic and blanket? Why didn't they close the door? Why didn't they use a dolly? Why do these jackasses still have a job? We may never know
I wouldn't want Outlaw safe company to move anything for me . Terrible way on doing what you just did
Jesus I don't know how long you been in business guy but it won't be long! don't post unless you really know what your doing ok? luck not your company
cont...is what got you through that!
Close the damn door for christ's sake.. it won't lock if you just spin the handle.
man the one side is all tore up I'd be calling Liberty and telling them come pick it up and send me a new one. Why didn't any one engage the door bolts instead of letting it swing in the breeze glad its not my safe.
Not "Professional"
These men do not look professional at all
as a professional mover this hurts my feelings there's no reason that this should be a two-man job they should have at least three and I don't know why they don't have an appliance dolly it makes things so much easier two straps go around it at the top and bottom two guys tip back to you and you wheel it and it's pretty easy we moved about a hundred of em
The "third" man was to busy recording their horrible safe moving service
@@victorpoliashov2467 fair enough lol
Unsafe, unprofessional. Scratched the crap out of that safe😢
1) put the camera down and help just stand it up in the garage.
2) BACK THE TRUCK INTO THE DRIVEWAY WITH THE GATE DOWN. could have saved 70% that work..
Door left open to dangle as you are moving and righting it. Every surface left unprotected to get scratched to piss.. wow very unprofessional.
Didn’t even wrap it. Scratched the hell out of it. Horrible way of moving a safe.
Why are you fighting the open.door??
Why was the safe door open?
They prob tried removing the door to lighten it. Lmao
AWESOME JOB GUYS 😊😊👍👍👍👍👍👍👍👍
I have the same exact Liberty Presidential safe and just experienced terrible "SAFE" movers destroying the paint job !!! If their imaginary insurance doesn't fix it, I'M SUING !!!!
this guy literally cut out the part where they were struggling... serioulsy theses guys are going to get hurt. did anyone see the lift gate in that dude back.
Should not be a problem. Just don't do any crazy weights. 1100 lbs or less should be ok. If you are having difficulty moving it in, it might be too heavy. I think of safes like a refrigerator filled with milk and meats.....so you should be ok. Install the safe next to a wall, not out in the middle of the floor.
Rookies!
Guys walking by could have easily.helped raise that verticle..call the local college and hire two linebackers..
you guys are just as bad as the delivery guys and i would argue that YOU guys left a majority of those scratches
Anchor and Pulley System
Should have pad wrapped first, then shrink wrapped to help keep pads nice and tight. Very unprofessional and unsafe way of moving these safes. Also needs more people to help.
Wow
These guys are probably the worst movers I've ever seen
Is it okay to have a safe on the main floor if there is a basement?
Firemen would hate you...
Basement is better but sometimes you may not have a choice when they are this big.
Lucky no one was killed by these clowns.
Badly damage by the previous movers.....sure
Absolutely unacceptable If the safe maker or store that sold it sees this video your contract is gone. that safe in particular is not cheap that finish is somewhat rare atleast to me ive only moved 1 identical one in the past 20 years I can only imagine how the owner feels safes need to be blanketed at all times during transport good job scratching it several times and trying to blame the first moving crew.
Are scratches like that just something you have to deal with/expect when buying a 1500 lb. safe? Or are movers/deliverymen expected to not damage the exterior?
We will sometimes wrap the safe with shipping blankets....Also, there are alot of risks when shipping a heavy safe, because if you hit something, it will leave a mark....!
OutLaw Safe Company, purchase a gantry and save your back. Watching hurt my back.
they suck
God, this is terrible. I would fire their asses on the spot if I saw any of that nonsense. They are lucky they aren’t paralyzed.
Bozo Alert!
now I get it mask around company logo guy is because of the embarrassment Do yourself a favor before someone gets hurt, get out of the business and let professionals do it!
really.. empty the safe .. that dolly is not necessary -- use a standing safe dolly.. :) fun to watch the struggle
Presidential is 1600 lbs.
I can’t believe he’s posting this garbage, you don’t know what you’re doing! No better than the last guys, you just got luckier I guess
Jaaaaaaa not a safe move 😅😂😂😂😂
that strap is got to be good on the bolt work with the door open....
why are you guys doing things the hard way? 1500 pounds ain't crap for a safe. I've moved ATMs that are heavier. standing up on to a pallet jack? really
Absolutely Ridiculous! 1,500Lbs/2 persons^downhill forces= Lawsuit for back injury. +750Lbs/per person. Pretty sure that violates OSHA standards. Now that the human aspect is covered, let's talk about moving practices. 2 People? Oh, plus 1 camera man/business owner. No assistance when it almost flipped, no moving blanket between pallet jack and item, and NO STEEL TOE SHOES? WTF!!? The other thing, why would you take the safe downhill to the truck when you have a lift gate? Are you that devoid of common sense as a mover/business owner? Let me Re-edit the description for the video; "I was called out to finish this safe moving job. The last safe company left this safe on its side. We up-righted it and anchored it to the ground. I did a $#!* job, almost if not created lifetime injury for my employees(who I secretly don't care about, but pretend to), and I'm an idiot for posting this on the web because it can never be removed."
Steel toe shoes won't do jack if a 1500lb safe lands on your foot.
Title should read: How Not To Move A Safe.
So many bad comments with out backing/ providing a better solution. Comments like “they completely destroyed this safe”. Hahahaha… this video definitely provides a good solution to move a very heavy safe on it side with out damages.
Fail cowboys just luckier than the bozos that first deliverd. No plan or prep should have stood up with out pallet truck. Much safer then pri bar and blocks to put on pallet truck also 3 guys min for that job you guys are gonna get hurt cutting corners.
I guess this is acceptable if you don't care about the finish of your safe getting damaged,
unless I know not to call this guys to help me.
Poor safe what a hurting that safe took....
Stop recording and help them already
Like a boss
Goons
🤦🏻
Not impressed
Terrible!!!