ฝัง
- เผยแพร่เมื่อ 10 ธ.ค. 2022
- In this video I will be showing you how to get the perfect prints in PLA from the Ender 3/ Ender 3 V2. I will go over the Cura settings that I use to get exceptional prints, as well as some tips and tricks that I use to make it easier.
- วิทยาศาสตร์และเทคโนโลยี
Great video. Easily the best and most informative ive found. I’m a week into 3D printing but I’m the guy that needs all settings perfect so i appreciate the advanced walkthrough. Also the hair spray works well to help bed adhesion
Thanks so much for the feedback! I’m glad you liked it
Now, I have a little question, my PLA is supposedly should be heated to 205 but my machine gives me the error of chaos E1 but it works in 185 as well. Idk@@kelpy222
just got my Ender 3 V2 setup and run into so many issues off rip - this video has been super informative and i can't wait to jump back in get it sorted! cheers for this dude :)
I spent like 12 hours this past weekend fixing a bunch and replacing parts.
My advice would be to fix one thing at a time and test it. Fixing multiple things at once and you won’t know what the problem(s) is/are.
Good video! Came up with almost the same setting after months of testing, but I had to fine tune the flow, as I had oozing and stringing
Thank you so much, these are some of the smoothest and fast prints I've had yet. Crazy how long of a way just a bit of adjustments goes.
Thanks for the tutorial! Planning on working on it soon!
Thank you this is very helpful.
Great video - Thanks!
Thanks man! This was a lifesaver, definitely working on some bigger projects!
Glad I could help!
@@kelpy222 hey man im running cura 5.2.2 on a ender s1 pro would printing settings be different?
Cool video. I like how you explained everything thoroughly. I feel like i was taught how to do it, and not just told what was best.
I appreciate it! I’ll make more soon
Useful video...
Always on the lookout for better prints, so checked your settings to my own, they are pretty much the same as mine for my CR10 and Ender 3 V2. I've printed on glass with the CR10 for more than 6 years just using a glass bed and good quality hairspray. In that time, I only lost a hand-full of prints but never to adhesion issues, I should also note, some low cost hairsprays don't work so well...
Very helpful video, thank you!
Awesome video, setting my printer back up after about 2 years. this has got me rolling again fast, thanks!
Great to hear!!!
@@kelpy222 a few days in with the settings and after a few small tweaks for my pla, I am having more successful prints than ever. Tha ks again👌
hello
great explanation, this is exactly what I needed! I'll test your settings! thanks🥳🤓
Thank you for helping me learn.
Thank You!!!! This is awesome
very insightful thank you
Great video...thanks for putting this together. Any tips for PETG settings in Cura?
Just what i needed, thaaankyouu.👍
Im going to be the first one to say it, these settings are amazing and helped me get awesome prints. Please keep making these awesome videos
Thank you!!! I will keep making videos for y’all, especially cause y’all have been amazing and supportive
@@kelpy222- can you please write down all steps like beginning to end -how to get perfect print from Ender 3 ! The video is too fast
Solid video. Ill have to play with the settings more as I learn but this was an awesome baseline to getting a solid profile going for a newbie getting their feet wet. Much appreciated. Improved my prints a ton.
Good to hear! Every printer varies a little, but this will get it started
@@kelpy222 hi do you have any settings that can help me fix my 3d prints from fusing together? Thank you.
Thank you for your informative video. I'll try them on my Ender 3 V2.
Let me know how it goes!
I just followed your profile and saved a custom one, i'm gonna try it out! Thanks a bunch!
Thank you so much!
I did extremely well on my Ender 3, however I increased flow to 120%, not much of a change tho, I will probably go back to your 100%
Thanks! Worked wonderfully.
Amazing!
I wanted to Thank you, for making this video and took your time to share with us , but I really appreciate your feedback, I’m a bigger so I need all the help I can get 😂 all jokes aside I followed your advice and my print came out great 👍 I was so content with the final product 🎉 Hartford CT salute you. Thank you.
Thanks man subbed
Thanks Kelpy!
Just wanted to point out that your wall line count is tied directly to wall thickness which relies on your line thickness. Line thickness being 0.4mm x 3 walls = 1.2mm. I don't think you can/should unlink those settings from one another as increasing or decreasing any of those values independently from one another will cause changes in the amount of extrusion is pushed through the nozzle to compensate. (ie. Wall thickness 1.5, wall line count 3 at a default line thickness of 0.4 based on nozzle width... that would result in the printer pushing out more filament to have a line thickness be 0.5 to be able to meet the wall thickness). I believe Cura will warn you too when doing that or as I see in your profile I think it's greyed out so you can't change it unless you click on the Fx icon next to it.
Thanks for all the pointers though, many of these settings helped.
You should make a video on how to make really strong printed parts and printer settings for prints that can withstand weight being hung from them and can take some force. I love this video but will these settings in this video work for prints that need more strength is the question
Does this Tutorial also work for the Ender 3 v2 Neo ?
Nice video 👍
Legend
can you drop settings to download and import ? it will save a lot of time for everyone :)
would you be able to do an updated version of this for the direct drive?
Could you leave a link for the boat you made in this video?
I have a question i followed this quide and saved a profile when i slice a file and try to print print speed is till set to 100 on the first layer i have to manually adjust the speed and nozzle temp and bed temp and fan speed . I have an ender 3 . Is there something I'm doing wrong when im slicing for the profile not to be saved with the presets.
Its amazing how much stronger 3 perimeters is, I use it all the time even for draft mechanical stuff ( in case its perfect and I just use it as final with some whittling... lol ). I always wondered what top skin was, I might try that, I assume its a slow high detail layer to finish?
Yea it is a slower top layer that’s more precise!
If I have klipper and input shaper increasing the speed will help plus with a 5015 cooling fan also ?
Non need to throw it in the freezer for an hour, just go to the bathroom or your kitchen sink and pour some water on it for like 2, 3 minutes and it will pop right of😅
What version of Ultramaker is that you used, its different than mine.
Do i need to make any changes to my actual printer? Or is all the settings in cura?
Can you do the same video but for the Elegoo Neptune 3??
Thanks, i was suffering from bad layer quality.
So... The default settings pretty much?
kinda wish you had shown the print at the end how it turned out.
Do you have perfect setting with ABS?
my infill density setting got forced to 1.0 mm cuz its over ridded by other settings how do i fix this
could you tell me what pla i should use? because i have been using the official ender pla and its been making print problems. especially on kit cards, it only makes spaghety all around the print bed😅
Are these setting good for everything that i print?
Im having issues with some files causing 1st layer not to stick.. some files print flawless
I just bought and put together the ender 3 upgraded i just can't get it correct I've tried different temp settings glue my prints won't stick I'm new to all this I have no idea what I'm doing but I want to 3d print
Hi I'm 68 and new to 3d printing I followed the video and found that I still got holes in the top and sides wondering what I could try to stop this
So question after I’m prrinting on the tuning it says print speed 100%
Is that 100% at 75
Or is it changing my values
Anyone know how good this is on the elder 3 pro?
bro i am having dimentional callibration issuses on my v2 neo. Z axis is 0.3 mm short
es compatible con la ender 3 v2 neo?
I’m trying this on a sunlu T3 wish me luck haha but I have Low speed at 50 instead of your 75 just to make sure I don’t mess up lol
Would theses settings work with the ender 3 neo? I barely see any video about the ender 3 neo printer
It should at least be a good baseline for it!
Some other setting i followed got me to 13 hours for my current print and with your settings it got me down to 6 hours. time will tell the quality but using an ender 3 cant blame the settings for that all the way
What did time tell you?
Let me know how it works for you! I’ve tried the same settings on a stock ender 3 and they seemed to work great In my experience
by the way the vidieo helped A LOT!!!!!!!! ☺☺☺
How do you get cuts to show all those settings. Mine has very minimal options
I believe there’s a drop-down menu somewhere
For some reason after getting the pei flexible bed I have layer shift. The first thing I’ve printed was the calibration cube and I don’t know how to fix this. Any suggestions?
Firstly if the bed is level, get a metal ruler and see if your actually bed plate is warped, it’s very common for it to be warped so don’t panic if it is there are ways to fix it.
Can you add a link to the profile in the above comment to your video?
What temp settings do you use for your printer I can't seem to get anything right
Check with the manufacturer of the filament you use. Pla, abs, petg, and tpu all have very different temps
This isn’t a print settings problem but every time my Ender 3v2 moves to print it make a loud noise. It sounds like the belt but I don’t know what to do. any suggestions?
Mine did that too until I just added a direct drive extruder on it. I am actually editing the video for the right now if you want to do that upgrade. If not, you might want to check the wheel tension on the hot end and the z axis rollers
Hey @kelpy22 do you mind sharing the settings file for this? I doubt you will ever see this months later but thank you if you ever do
I’m not sure how to do that, do you mind explaining?
@@kelpy222 yeah you just go to wherever cura stores they profile and share the file
@@jedi7483 if you wanna dm me on insta I’ll send it over! Kelby__rice
Damn, wanna buy a new faster printer and after playing arround with the propagated settings ended up in perfect prints. Now i have no real need for a new printer anymore ;P
I don't understand, I can't level my bed to save my life, it seems like roughly the center of my bed is higher than the edges, I am not sure what to do....
it should be the opposite : the center is lower and you can put a few aluminium sheet to make it even
Can this work with the neo?
Can never find a vid on any neo's.... Anybody know the difference between ender 3 v2 pro and the ender 3 v2...?!
Привет есть что новое по настройкам)?
Blud is on a mewing streak
giver me the curaprofile file please
ratio
At the end of your video it is black 😑😑
...
can you help me please. i bought a ender 3 pro and i cannot get any prints, as soon as it starts it gets like spaghetti,i leveled the bed, i bought the cr touch, i bought new springs, i updated irmware, whats going on? can you help me please, i can video u on instagram, facebook, whatever you like, i really need your help... ive been trying for a week and a half and ive watched every video on youtube. lol. again, i need your help pls.
if its not sticking to the bed then the nozzle is too high up