I notices that randomly, not always, that despite disabling my pin lock, when starting the car, it will still ask for the code to be entered, and there are times when I must enter it several times before it recognizes or accept it. Has others experienced this? While its an issue for me, its a small inconvenience compared to the protection it provides.. Besides if it does it to me, I'm that much no comfortable with a thief attempting to steal it.. LOL...
Happy to hear it’s not a major inconvenience, although our 2.6.0 beta firmware just released for early access. 2.6.0 fixes some of the issues and offers even greater stability Email support@zautotech.com if you’d like early access to it (if you have a TaZer, not yet available for the TaZer DT)
Yes, I have experienced this in my JL Mini, but only when I try to do it too fast. Almost feels like it is too busy flashing the dashboard lights so when it reads the steering wheel buttons it misses an entry or 2. Looks like it lags.
Bruhhh I fucking wish I seen this comment earlier . I had the exact same issue & I got locked out of my car for 3 days before I took it back to the dealership . They told me my ecu was fried & tried charging me upwards of $1700+ for a fix but I ended up swapping out the entire engine instead 😂
2 in the morning and the system decided not to accept the code and my car alarm went off with the horn. All neighbors come outside to check WTF was happening... I unplugged the Tazer and left the scene...shm I still haven't plugged it back it affraid that it may happen again
One word of caution to anyone with a throttle controller device, and maybe it only happened to me because of my stupidity. But if you have a pedal commander or any type of throttle controller, do not use the TaZer settings and or the Dodge settings without disable 2 of the three first. I blew out my throttle controller. A $69 part that disabled a $80K car... SMH..
My remote start I just installed is after market. I do not need to hit the ignition button after entering the car. Is there a way to keep the pin from triggering until the door is unlocked? After the update the car no longer shuts off with the tazer in but I can not have the pin set to on.
I been loving my tazer on my 2013 se when could we expect the next update? Also are there any plans on adding a remote start feature for the 11-14 chargers by chance?
I’m really considering buying the Tazer for my 2017 Charger but have so many questions. Will the performance pages and different drive modes still be available if I were to remove the Tazer device? And will this feature be available for my vehicle?
Hey ive heard some people had issues with pin lock where their BCM got bricked and had to be towed, can you please elaborate on this issue? I ordered a tazer from amazon recently and one of the reasons being pin lock.
Yea sure thing. That was an issue that arose early on from our initial release of Pin Lock. When someone would remote start their vehicle and then go to enter their pin lock code, the RF hub would freak out. The issue was never seen on our end before releasing the firmware. Those that did experience this issue have all been reimbursed for the repairs of their RF hubs. This issue was seen on TaZer firmware 2.5.7; the current TaZer version is 2.6.1 and is a stable firmware version. Any versions that may have had the RF bug has been removed fro our website completely and can't be downloaded
I would recommend reaching out to our support staff even if you bought it from Amazon for any issues. Although if there was any reason you wanted to return it or say you were sent the wrong one, that would need to go through Amazon. If for any reason something like that happened, you can still reach out to our support staff and they will walk you through those steps@@Simpinski
Just installed this 08/17/23 on. firmware 18.2.4.. everything was working good until I enabled the TurnCam.. it was glitchy and to the point, i turned it off b/c i would sometimes not work and other times it wouldn't deactivate after I've completed my turn. NOW my surround view button doesn't work, I've tried unmarried, and reflashing, i haven't downgraded the firmware. has anyone else experienced something similar?
@@mujianchen8871 that’s not how it works. The device needs to remain plugged in to function and receive the signal to activate the pin. The only KillByFob and pedal disable you can remove the TaZer afterwards, but the feature needs to be activated FIRST
I notices that randomly, not always, that despite disabling my pin lock, when starting the car, it will still ask for the code to be entered, and there are times when I must enter it several times before it recognizes or accept it. Has others experienced this? While its an issue for me, its a small inconvenience compared to the protection it provides.. Besides if it does it to me, I'm that much no comfortable with a thief attempting to steal it.. LOL...
Happy to hear it’s not a major inconvenience, although our 2.6.0 beta firmware just released for early access.
2.6.0 fixes some of the issues and offers even greater stability
Email support@zautotech.com if you’d like early access to it (if you have a TaZer, not yet available for the TaZer DT)
Yes, I have experienced this in my JL Mini, but only when I try to do it too fast. Almost feels like it is too busy flashing the dashboard lights so when it reads the steering wheel buttons it misses an entry or 2. Looks like it lags.
@@jaminoes_ The new beta version of the software resolves this issue..
Bruhhh I fucking wish I seen this comment earlier . I had the exact same issue & I got locked out of my car for 3 days before I took it back to the dealership . They told me my ecu was fried & tried charging me upwards of $1700+ for a fix but I ended up swapping out the entire engine instead 😂
Installing my new Tazer tmw. Looking forward to it.
Enjoy
@@zautomotiveHey Question should sport 8sp and 5sp be set to yes our no if i have an automatic 2023 charger?
2 in the morning and the system decided not to accept the code and my car alarm went off with the horn. All neighbors come outside to check WTF was happening... I unplugged the Tazer and left the scene...shm
I still haven't plugged it back it affraid that it may happen again
Feel free to email support and they can help you troubleshoot your concerns - support@zautotech.com
One word of caution to anyone with a throttle controller device, and maybe it only happened to me because of my stupidity. But if you have a pedal commander or any type of throttle controller, do not use the TaZer settings and or the Dodge settings without disable 2 of the three first. I blew out my throttle controller. A $69 part that disabled a $80K car... SMH..
My remote start I just installed is after market. I do not need to hit the ignition button after entering the car. Is there a way to keep the pin from triggering until the door is unlocked? After the update the car no longer shuts off with the tazer in but I can not have the pin set to on.
Email support@zautotech.com
I been loving my tazer on my 2013 se when could we expect the next update? Also are there any plans on adding a remote start feature for the 11-14 chargers by chance?
Remote start isn't something that can be added through a TaZer update
I’m really considering buying the Tazer for my 2017 Charger but have so many questions. Will the performance pages and different drive modes still be available if I were to remove the Tazer device? And will this feature be available for my vehicle?
Contact support and they can answer all your questions - email: support@zautotech.com
So has the taser been used on a new 2024 JL ro see if all the features still work incase of software changes
We have one on order to eventually make sure our product is compatible for the 2024 JL owners
Hey ive heard some people had issues with pin lock where their BCM got bricked and had to be towed, can you please elaborate on this issue? I ordered a tazer from amazon recently and one of the reasons being pin lock.
Yea sure thing. That was an issue that arose early on from our initial release of Pin Lock. When someone would remote start their vehicle and then go to enter their pin lock code, the RF hub would freak out. The issue was never seen on our end before releasing the firmware. Those that did experience this issue have all been reimbursed for the repairs of their RF hubs. This issue was seen on TaZer firmware 2.5.7; the current TaZer version is 2.6.1 and is a stable firmware version. Any versions that may have had the RF bug has been removed fro our website completely and can't be downloaded
@@zautomotive if anything were to happen would there be any issues with support since i bought it from amazon and not directly from your website?
Can you now use remote start with the latest firmware?
Yes in 2.6.1 this bug is fixed@@alexissaldate1
I would recommend reaching out to our support staff even if you bought it from Amazon for any issues. Although if there was any reason you wanted to return it or say you were sent the wrong one, that would need to go through Amazon. If for any reason something like that happened, you can still reach out to our support staff and they will walk you through those steps@@Simpinski
This process does not apply to Tazer JL Mini for Jeep, does it? I cannot see those settings, only "Clear PIN"
Correct. The Tazer JL currently only has the base launch version of Pin Lock
@@zautomotiveany chance this will be updated to have those features soon?
@zautomotive Will performance pages work on a 21 challenger gt? Or do I need to get the 8.4 display?
I enabled all the features but after i put my pin in it shuts off my car then i have to turn it back on
That may happen, happens on our Scat pack sometimes.
Here’s a quick work-around: th-cam.com/users/shorts7W7a3xnqwbg?si=8vOIPJh2JZh0Nzxz
Just installed this 08/17/23 on. firmware 18.2.4.. everything was working good until I enabled the TurnCam.. it was glitchy and to the point, i turned it off b/c i would sometimes not work and other times it wouldn't deactivate after I've completed my turn. NOW my surround view button doesn't work, I've tried unmarried, and reflashing, i haven't downgraded the firmware. has anyone else experienced something similar?
What happened if I unplug it? Can pin lock won’t working
All features explained: th-cam.com/video/nBb8uGz1Y2o/w-d-xo.htmlsi=NwIm6_fyyg_rrShY
@@zautomotive I just try it. It 18.2.4 version. I set the pin. And unplug it. Start the truck. It didn’t ask for the pin
@@mujianchen8871 that’s not how it works. The device needs to remain plugged in to function and receive the signal to activate the pin. The only KillByFob and pedal disable you can remove the TaZer afterwards, but the feature needs to be activated FIRST
Nopar
I dont get it
Awesome!!!!
Guessing they don't like Mopar or just jealous
Don't worry it's only John McKlown.
@@Cryptic_Triptych hahaha I haven't been called that since I was a kid. Made me laugh