@@StupidBlokeStupidVideos Don't get too professional looking though, your style is one of the reasons I enjoy your video's so much and I expect others would say the same.
I feel like I've just watched a BBC documentary with that tripod.... I usually enjoy looking at the pavement while you struggle to do a job one handed 🤣
It all seems a little bit too polished for this channel. I usually like to leave the viewers with a combination of seasickness and confusion, as in no idea what I’m actually fucking doing.
So you do have a left arm. I must say the tripod is a great addition. I've go no brake problems at the moment but I'm thinking I'll do this anyway, a clean up and greasing of the callipers. Another great little vid. Cheers.
Another informative techical automotive, well you get the idea! Am watching it sat in Betty, in Cumbria with a brew 🍵 top notch sir 👍 shame it wasnt on a proper car but you cant have everything i suppose 🤣🤣
love the axle stand ,,, I felt safer ,, even from here I got that fuzzy and wuzzy feeling you usually only get in carparks late at night , flashing your headlights , in that special way you used to do so often..
Your right there, trusting that rusty old jack? You'd think that a high calibre mechanic like him would have a nice shiny high quality jack with matching chocks and stands!
I’m waiting for Snapon to sponsor me with a nice shiny new one, but until then this one will have to do. The only problem I have is some tit keeps borrowing it to fix his ovloV.
Brake fluid when fitting pistons isn’t a bad idea, but silicone grease is much better to keep water out and still won’t do any harm to the rubber or have any negative effect.
@Stupid Bloke Stupid Videos I'm doing brakes, I've got brake fluid at hand, If you couldn't 'borrow' it from work, you wouldn't use silicone grease either, or BRRAKE PAURTS CLEENUR!!
In my C1 i replace oil dipstick o ring. The engine run better, is not suck air, there is not insert moisture in the engine and maybe no loss oil from fumes. Dimensions o ring 8,5mm x 5mm thick 2mm.
@@StupidBlokeStupidVideos I do the same in Nissan Tiida 1.6L petrol 2008 (another one car of the family). Before is idling 900 rpm and after is idling 800 rpm.
I wonder if actually having a tripod will add to or take away from your style of vids.. cool stuff, first beamer vid of yours I watched, normally watch the c1 ones. 👍😄😎
The tripod has made the content so much nicer to watch, no more seasickness, 100% improvement. 🤣🤣🤣
Couldn’t be much worse could it 😂
@@StupidBlokeStupidVideos Don't get too professional looking though, your style is one of the reasons I enjoy your video's so much and I expect others would say the same.
@@DARTraderMediaProductions I doubt there’s much risk of that happening 😂
BRAYKE PORTS CLEANURRR - cracks me up every time 🤣😂
I like to “go aheeeead” and use it at every opportunity.
Excellent, my kind of fixing... got a dragging rear caliper on the Saab so shall try cleaning it all up before replacing.
Always worth a try first.
P.s. love your content, I don’t think anyone else could make videos about motorways as interesting and funny as you do.
I feel like I've just watched a BBC documentary with that tripod.... I usually enjoy looking at the pavement while you struggle to do a job one handed 🤣
It all seems a little bit too polished for this channel. I usually like to leave the viewers with a combination of seasickness and confusion, as in no idea what I’m actually fucking doing.
So you do have a left arm. I must say the tripod is a great addition.
I've go no brake problems at the moment but I'm thinking I'll do this anyway, a clean up and greasing of the callipers. Another great little vid.
Cheers.
Thanks mate, and yea,.. prevention is often better than the cure! When servicing bikes at work, I do all this as part of the service.
A very polished looking production, just like those caliper pins. Yes!! Brake-parts-cleanurr too Great Jarb 😂
Thanks. I’ll let the editing team know 🤣
Quality video as always !
Thanks mate
Another informative techical automotive, well you get the idea! Am watching it sat in Betty, in Cumbria with a brew 🍵 top notch sir 👍 shame it wasnt on a proper car but you cant have everything i suppose 🤣🤣
Thanks mate. I’ll be sure to balance things again by putting a C1 video out next Saturday!
@@StupidBlokeStupidVideos good lad 👍
love the axle stand ,,, I felt safer ,, even from here I got that fuzzy and wuzzy feeling you usually only get in carparks late at night , flashing your headlights , in that special way you used to do so often..
Your right there, trusting that rusty old jack? You'd think that a high calibre mechanic like him would have a nice shiny high quality jack with matching chocks and stands!
I’m waiting for Snapon to sponsor me with a nice shiny new one, but until then this one will have to do. The only problem I have is some tit keeps borrowing it to fix his ovloV.
Fucking Vulvas, they're almost as bad as BMWs. The chitroen will out last everything, like a cockroach 🪳
@@StupidBlokeStupidVideos yes ,,, in the land of the blind , the one eyed man is king.
Always told to use a bit of brake fluid on the piston,
Brakes International do full caliper service kits starting at £9 for single piston calipers.
Brake fluid when fitting pistons isn’t a bad idea, but silicone grease is much better to keep water out and still won’t do any harm to the rubber or have any negative effect.
@Stupid Bloke Stupid Videos I'm doing brakes, I've got brake fluid at hand,
If you couldn't 'borrow' it from work, you wouldn't use silicone grease either, or BRRAKE PAURTS CLEENUR!!
@@sally6457 😂😂😂
In my C1 i replace oil dipstick o ring.
The engine run better, is not suck air, there is not insert moisture in the engine and maybe no loss oil from fumes.
Dimensions o ring 8,5mm x 5mm thick 2mm.
I can see how it would help not to suck air in
@@StupidBlokeStupidVideos I do the same in Nissan Tiida 1.6L petrol 2008 (another one car of the family).
Before is idling 900 rpm and after is idling 800 rpm.
I wonder if actually having a tripod will add to or take away from your style of vids.. cool stuff, first beamer vid of yours I watched, normally watch the c1 ones. 👍😄😎
Thanks mate and, I think it adds a level of professionalism and quality that we’re just not used to here.
Yes
YES
50% more efficient to do videos with that tripod. Didn't I tell ya!😅😂
So now we get 50% more stupidity 🙄 😅
I saw your channel name on your car
Sweet. Where did you see me?
@@StupidBlokeStupidVideos in Bolton on citrean c 1 car
@@Ur_Victix sweet. That must have been a few weeks ago at least!
Should get another 5mph out of that now!😂
Getting another 2 or 3 mpg. YES
50% more efficient to do videos with that tripod. Didn't I tell ya!😅😂
It’s all about having that extra hand 😂