Hey man, great video. I was wondering if you have any video how to replace the surround ? I have a pair of Kicker XPL 12s and the foam surrounds are wasted. I figure it's a hard job since they are stitched into the cone. But I was going to DIY if I could get help and/or replacement surrounds in the first place. Thank you
I have the same model 12 inch sub and I believe one of the negative terminals has a bad connection. Its a 2ohm dual voice coil sub and the resistance measured from one coil's negative and positive is all over the place when using the terminals. When I measure from the positive terminal and the first negative tinsel loop on the spider I get a perfect 2ohm measurement. Any suggestions on the steps I should take to make a repair that doesn't involve complete disassembly? Thanks for any help. Kicker Comp RT12 48CWRT122
What size spider and voice coil did you use? I have this exact woofer that I damaged about 3 woofers ago but I had kept it because I really loved the sound quality and eventually wanted to try and fix and never found anything online about this perticular sub until I stumbled upon this and now I just need to attempt
Hello Angel. For the spider, I ended up using the 8 inch outer, 3 inch inner diameter semi cupped progressive roll spider from lord of bass. I believe cost is $10-12 each (XHDZ068-2 is part number). For the coil, I purchased a 4 layer 49.5mm copper voice coil on an aluminum former from Aliexpress. The part number for coil Item# 8162904946459316. I hope this helps you and thanks for watching.
hello do you happen to know if the 10" comp R would be the same replacement parts as the RT? I have a comp R and it needs same replacement as u did to this one. thank you
US $13.96 9％ Off | 1PC Speaker Subwoofer Voice Coil 49.5/51/51.5mm 4 ohm 4 Layers Wire Car Bass Repair Part With Copper Wire Black Aluminum Former a.aliexpress.com/_mLU5lK4 WX495
Well I can really see that you're very specific and I sure that it will help someone with reconning subs thanks
Thank you for watching.
Hey man, great video. I was wondering if you have any video how to replace the surround ? I have a pair of Kicker XPL 12s and the foam surrounds are wasted. I figure it's a hard job since they are stitched into the cone. But I was going to DIY if I could get help and/or replacement surrounds in the first place. Thank you
Can i send mine to you to fix?
I have the same model 12 inch sub and I believe one of the negative terminals has a bad connection. Its a 2ohm dual voice coil sub and the resistance measured from one coil's negative and positive is all over the place when using the terminals. When I measure from the positive terminal and the first negative tinsel loop on the spider I get a perfect 2ohm measurement. Any suggestions on the steps I should take to make a repair that doesn't involve complete disassembly? Thanks for any help.
Kicker Comp RT12 48CWRT122
Dope
What size spider and voice coil did you use? I have this exact woofer that I damaged about 3 woofers ago but I had kept it because I really loved the sound quality and eventually wanted to try and fix and never found anything online about this perticular sub until I stumbled upon this and now I just need to attempt
Hello Angel. For the spider, I ended up using the 8 inch outer, 3 inch inner diameter semi cupped progressive roll spider from lord of bass. I believe cost is $10-12 each (XHDZ068-2 is part number). For the coil, I purchased a 4 layer 49.5mm copper voice coil on an aluminum former from Aliexpress. The part number for coil
Item# 8162904946459316. I hope this helps you and thanks for watching.
Where can i find those voice coils
Having i hard time trying to locate them
hello do you happen to know if the 10" comp R would be the same replacement parts as the RT? I have a comp R and it needs same replacement as u did to this one. thank you
I would imagine the R uses a different voicecoil height as it has a deeper motor opening. I recommend taking it apart and getting all measurements.
I haveva q class L7 10 that needs a new VC. Do you do repairs for the public?
Email me for a quote.
@@Moegneto what's your email
Do you know where to find a new cone and spider for a 15" CVX D4?
Your best bet will be to look for a used/damaged one off eBay/offerup/market place. Also reach out to robot underground to see if they have it.
Is it possible for me to get you to repair mine?
Email me at moegneto@gmail.com
How did you remove the cone from the coil? What chemical did you use to remove the old glue?
If you are referring to the dust cap, I briefly heated the edge with a hot air gun and slipped my accessory tools (plastic pry bar) under the edge.
@@Moegneto I was wondering how you removed the coil from the cone and spider pack without damaging them. To replace only the coil and/or spiders.
@@Moegneto I see that the CVX has a 2 part cone. One part is glued to the other underneath. Would I need to separate them to replace the coil?
Where you got the voice coil??
Check out lord of bass or eBay
Where can I get a rebuilt kit for that speaker kicker comp rt10
Reach out to Patrick at Robot Underground or Jorge at Lord of bass.
Hey man the video is really helpful but I couldn’t find the coil, is there a way you can send the link to find the coil???
Also I’m working on a 12” kicker so would it be the same coil or is it different?
US $13.96 9％ Off | 1PC Speaker Subwoofer Voice Coil 49.5/51/51.5mm 4 ohm 4 Layers Wire Car Bass Repair Part With Copper Wire Black Aluminum Former
a.aliexpress.com/_mLU5lK4
WX495
I would think the 12 does have a different coil because it handles more power. Take it and measure to be sure.
@@nickramirez4499what was the size of the voice coil for the 12 inch sub?
Can I repair my cvr122 similarly?
Absolutely!
Where u get the voice coil from?
You are able to purchase these voice coils from lord of bass or Patrick at Robot Underground.
What size coil did you use? I have an L7T it looks the same