Why sell it? I mean you need it for content. is it because it’s not a factory 3 fan model and you Timmy rigged it? I would think You’d would want to keep it after all that work. For Christ sake you kept this long with the hideous aftermarket cooler this is 100x better now.
Yeah, but new top cards will release this year. He got this 2080ti for benchmarking. I would keep it too, as it has sentimental value, and wouldn't want to sell DIY "junk" to someone...
Yeah I aree, it is a GPU for work so getting the performance for a low price is what matters not looks, also if Timmy Joe sells it he is back to not having the Best GPU for benchmarking CPUs which is why he bought it
Sorry that the audio is Garbage, I am still trying to figure out the best settings for my new microphone setup. I tried to edit the audio and excuses excuses. BE SAFE OUT THERE!!!
use voice cancelation, on the recording always leave a space where it records the background sound,get the sample, then apply the effect to the whole recording, works with audacity ;)
Timmy Joe I need help just bought a new WD ssd It shows up on my bios shows up in device manager says it’s working properly but when I go to disk management to format it will not show up just my current one I’m using just thought you might know what to do
@@thomaswyatt1703 did you Partition your SSD? In order to use any hard drive added after you install windows on the initial hard drive, you have to partition it before you see it usable while booted into windows, you'll always be able to see it in bios and in device manager tho..just wont be able to use it
I picked up a 2080 ti ftw3 from a fellow PC builder/seller for $400 US. The card was defective (memory issue that plagued early rtx cards) but since it was an evga card I just sent it back for RMA and got a new one it the mail. $400 FOR A EVGA 2080 TI FTW3!!!!! $600 is still an insane grab on a 2080 ti though, still an incredible deal.
So I have a similar Situation making a Franken2080ti. Got a PNY Blower 2080ti. Guy had it and was pissed off at the Blower and got a different one and was trying to sell it. He hired me to Mod a couple of Arcade1up Machines for him and he gave me the 2080ti in trade. So I got the Card for a few hours work. From there I sold my 1080ti for $450. Then I got the Cooler from an MSI 2080ti Ventus for $60. No RGB or any LEDs on the cooler (and I don't care TBH) and it matched up great (Both Reference Models) Board and Cooler had 2 Fan Headers (original Blower just used one of them) After that I was having an issue where it was not recognizing that there was 2 fans. Flashed an EVGA Black Bios and ran Precision X1 and all the Fans are there and all the tweaking works. So in the end I got a 2080 ti and made $390 :D
Reminds me when i got an offer for a 2080ti pulled from a dell for 500€ abt a year ago but i refused cuz i didn't wanna deal with a blower and green pcb or any possible defects. Fk me right
@Maciej with rumours that 2080ti's dieing from the factory it did seem a bit sketchy at that time. I'm still banging my head against the wall for it but i'm pretty sure rdna2 will bring me a 2080ti for 500€. The rx5700xt is only 20% behind for just 300€
@Maciej with 8 gigs of vram i wouldnt call anything futureproof for more than 2 years. The next gen consoles are going to break the 8gb vram barrier for sure
Don't be super-shady, Timmy Joe! You can sell that card honestly for what it is without pretending it's something it isn't. If it were me, I'd be excited to have gotten a free 2080 Ti paid for by two videos about it. Plus, I'd think you'd have a sentimental connection to it after your victorious project to make it pretty. Use it for testing if you need a prettier one for daily use. That card is part of channel lore now!!!
I bought a Power Color RX5700 XT open box for $293 at Microcenter and a Bykski water block for $72 on eBay. Add in around $10 of thermal grizzly pads and paste and you get 2100+ Mhz easily. Not your 2080 TI level but more than enough for me. And the blower makes a great paperweight!
The only ‘Timmy rigging’ I’ve done on my GPU is replace thermal paste and I attempted very high overclocks if that counts, I learned very quickly what my RX570 is capable of, 1550MHz crashed after a few seconds of stress test, 1441MHz is what I’m running now and 1925MHz on the memory, max temps in stress test are 72C at 70% fan speed
If that card has a USB C plug on it you can grab +5v from that, you can use 12v on that 5v led, just add a resistor inline (3k to 5k ohm should be fine) (same way noctua makes there LNA cables)
It takes time to build what you have made - hunting for parts etc. Something that some people may think "wow that's cheap", however there are those out there that 'can't wait and have to have it 'now'.
I bought a reference RX 480 back in 2016 and eventually got tired of how loud/hot it was. So I bought an Arctic Accelero Twin Turbo II to replace the stock cooler and it was much better temperature and noise wise. Recently I decided to remove the Accelero's shroud but keep the heatsink and instead zip tie Phanteks 120 mm fans on it and while it does take up a lot of pci slots now it is even quieter and has cooler temperatures.
The adapters and splitters you needed at 10:30 are sold on Amazon. Used them a few times when setting up similar 'timmy rigs', keeping fan control for VRM after removing the stock coolers and adding waterblock. EDIT: nice solder job though :)
Too bad Nvidia wasn't actually selling these for $600-$700. I would have definitely upgraded from my GTX 1080 at that price. Instead, they not only lost me with Turing, but I'll likely switch to AMD if they release an RDNA 2 card in that price range this year.
If everyone bought used rtx 20 cards nvidia gets nothing out of it. And would not get enough sales from Ampere as people would be satisfied with their game performance.
Always need to be careful with custom PCB cards and mixing up the parts. You should always go with reference design cards/coolers/waterblocks so they can be swapped out and have interchangeable parts! If you get FTW3/Strix/Aorus Xtreme/Gaming X Trio etc....Also, custom cards do not run much faster than RC do anyway. Just my two cents on the matter.
By the way there is 12 volts small LED diodes, i work at small electronics tech shop and 1 unit goes for 10cents at most, i would just swap that 5 volts led with 12votls thats it
I'm fairly certain you can change the LED color on that card using Firestorm/Spectra. I remember people having issues with that a while back, and you had to download a certain version of the software and you were able to change the LED color, which would stick after reboot and everything.
I always wondered: Wouldn't the back plate heat sink on the Accelero work better if the fins went the direction of the typical case airflow? I'm not an engineer, but it just seems...really weird. Even with a wraith cooler, my case airflow is pretty steady front to back. What am I missing here...?
I am so much more a fan for life @Timmy Joe with your add in new sponsor @Word of Warships. My fav game for 2 years now. Thanks for your content, no ones is equal to the way your running your channel Sir!
What's be really cool is if you found like an old xaiser ii or something, and oem Dell/Alienware mobo, and 2080 ti with the accelero, and made the most ballin' sleeper pc
Tired of a blower fan? I've had a reference GTX1070 proper founders in my case, with custom fan curve, it never gets over 60 and is barely audible... not sure what the big fuss is
I seen an MSI Meg back there.. Really nice job Timmy. I really like it! Take a black sharpie and run it around the edge. It looks nice man. I'd take it over the 1200 I paid for the EVGA XC Ultra.
I can get my titan x pascal to 2.1ghz with 2 130cfm fans on its rad because this things silicon quality is amazing but only problem is if i go above 35c it becomes unstable
Timmy joe you can use that green pcb 2080ti and buy a green z390 motherboard, use standard no heat spreader ram, or some ram that looks like its out of the late 90s/ early 2000s, use a ketchup and mustard psu, a floppy drive, Zip drive, optical drive inside of an old fashioned case, and fill the thing up with controller cards, sound card, nic, wireless, etc. all green pcb. You would have a power house ricer pc that looks like a 1990s office pc. If you could use flat ribbon cables it would look even better. Please. I have to see someone do this. I have to.
The Morpheus II Core Black Edition is a good looking 3rd party cooler with 12 heatpipes. It can cool a VEGA 64 at 1750MHz no problem. That's also with the HBM2 at 1150MHz. I also found a heap of Gigabyte GTX 1080ti Turbo's. Yeah, there blowers but, not just any blower. They do use Vapor Chamber's and they have great VRM's. $400 all day long. So, $400 for a GTX 1080ti and about $70 for a Morpheus II Core 2 Black Edition and you got a beast of a set up for under $500. Not to shabby. Either that or get a Radeon VII for $550.
Hey Timmy Joe!!! Love your channel, I've been hooked on these videos with cooler changes. I have a Blower style 1070ti and would like to find a more efficient cooler for it. How do I find info on what would fit?
Why don't you paint the pcb with enamel paint? You need it for benchmarking, so it need not go anywhere. You could use the snow and rig a TimmyIce Cooler to it?
I remember buying the EVGA 1060-6GB card. Still working to this day! Bought it for $300 USD on eBay. It was a mining card before, but still works a treat! It has been 4 years now since I bought it, and I think that was bitcoin market had crashed. Only thing on it is that I cannot change the voltage on it. Is it something to do with it being locked in its BIOS for that card? System I have is a Core-i7-6700 non-K, 16GB of DDR4 Ballistix Sport RAM that is XMP enabled, an MSI B250 PC Mate, along with a NZXT case. This is the system I had built myself. I would love to send you the rig,s picture and such for you to see. :) altho.... My wiring in it is kinda poop. XD. CHEERS!
Just get a 12v led for $2 and wire it in. Jeez Timmy. Edit: Also you can paint the green pcb black (or just the exposed parts if you prefer) without any drama. I've done it many times with gpus, ram, wifi cards etc.
i actually like the back heatsink, i just ordered a EVGA 2080TI FTW3 OC ULTRA, you think that backplate can be swapped for the accelero one? extra cooling from the backplate too hell ye!
I was able to pick up a cooler from a company that watercools their 2080ti's its from a MSI GeForce RTX 2080 Ti VENTUS. I had to do the same thing and solder the fans together no biggy. my issues i cant seem to control the fan speed. MSI afterburner recognizes everything but adjusting curve / trying to manually they just seems to be on a constant spin
Not sure if you can run precision x1 on a non evga card but it has a vrm and memory temp monitor. Also, please don't sell it unless the person buying it knows it's not a legit zotac card.
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
I wouldn’t sell it under the impression that it’s an AMP edition. Seems dishonest.
Yeah, I don't think he'd do that though. That's super duper shady.
Yeah, that would be a crap move. Even having floated the idea make him a bit of a douche, in my book.
@@RojasTKD7 it was a thought not an action lol
RojasTKD7 plus the fact he said if someone wanted him to build them a 2080 system he’d just use the spare blower one which he literally said was bad
Well he also said it didn't work to get a a discount which was prob a thermal paste issue
Me: Raid shadow legends?
Timmy: no
Me: phew!
Mobile game ad? No.
Desktop game ad? That's fine.
World a warships is a great game too.
@@Direwoof cap
Why sell it? I mean you need it for content. is it because it’s not a factory 3 fan model and you Timmy rigged it? I would think You’d would want to keep it after all that work. For Christ sake you kept this long with the hideous aftermarket cooler this is 100x better now.
Yep he should definitely keep it!!
Yeah, but new top cards will release this year. He got this 2080ti for benchmarking. I would keep it too, as it has sentimental value, and wouldn't want to sell DIY "junk" to someone...
@@kopasz777 I don't think there's anything more than paper launches this year due to the obvious...
Yeah I aree, it is a GPU for work so getting the performance for a low price is what matters not looks,
also if Timmy Joe sells it he is back to not having the Best GPU for benchmarking CPUs which is why he bought it
That's a nice paper towel roll you got there sir. How much?
Pssst...
Yo...
Meet me in the parking lot!
10$/sheet.
Dont dare to come wired!
Dont let Louis Rossmann see your soldering technique
Sorry that the audio is Garbage, I am still trying to figure out the best settings for my new microphone setup. I tried to edit the audio and excuses excuses. BE SAFE OUT THERE!!!
Great content as usual! Keep on keeping on!
Timmy Joe PC Tech Go on dude, flash that BIOS! See where is goes 👍🏻
use voice cancelation, on the recording always leave a space where it records the background sound,get the sample, then apply the effect to the whole recording, works with audacity ;)
Timmy Joe I need help just bought a new WD ssd It shows up on my bios shows up in device manager says it’s working properly but when I go to disk management to format it will not show up just my current one I’m using just thought you might know what to do
@@thomaswyatt1703 did you Partition your SSD? In order to use any hard drive added after you install windows on the initial hard drive, you have to partition it before you see it usable while booted into windows, you'll always be able to see it in bios and in device manager tho..just wont be able to use it
so one 2080ti in the 3d mark score of 38k beats 2 titan xps in sli. Thanks Barnacles! check out the nerdgasm vid of the titan x scores
13:45 OMG have you ever heard of heat shrink?
Says he's not going to use the 2080 back-plate and uses it anyways.
I picked up a 2080 ti ftw3 from a fellow PC builder/seller for $400 US. The card was defective (memory issue that plagued early rtx cards) but since it was an evga card I just sent it back for RMA and got a new one it the mail. $400 FOR A EVGA 2080 TI FTW3!!!!! $600 is still an insane grab on a 2080 ti though, still an incredible deal.
So I have a similar Situation making a Franken2080ti. Got a PNY Blower 2080ti. Guy had it and was pissed off at the Blower and got a different one and was trying to sell it. He hired me to Mod a couple of Arcade1up Machines for him and he gave me the 2080ti in trade.
So I got the Card for a few hours work. From there I sold my 1080ti for $450. Then I got the Cooler from an MSI 2080ti Ventus for $60. No RGB or any LEDs on the cooler (and I don't care TBH) and it matched up great (Both Reference Models) Board and Cooler had 2 Fan Headers (original Blower just used one of them) After that I was having an issue where it was not recognizing that there was 2 fans. Flashed an EVGA Black Bios and ran Precision X1 and all the Fans are there and all the tweaking works. So in the end I got a 2080 ti and made $390 :D
You kinda look like that old man in movie "UP"
Noice
Lmao
That soldering my eyes
😧
Don't flash it. Don't sell it. If you sell it link to the videos.
Reminds me when i got an offer for a 2080ti pulled from a dell for 500€ abt a year ago but i refused cuz i didn't wanna deal with a blower and green pcb or any possible defects. Fk me right
@Maciej had no warranty though
@Maciej with rumours that 2080ti's dieing from the factory it did seem a bit sketchy at that time. I'm still banging my head against the wall for it but i'm pretty sure rdna2 will bring me a 2080ti for 500€. The rx5700xt is only 20% behind for just 300€
@Maciej on average 600€ in Denmark. Makes no sense that you can essentially get a 1080ti used or 5700xt for 300-350€
@Maciej with 8 gigs of vram i wouldnt call anything futureproof for more than 2 years. The next gen consoles are going to break the 8gb vram barrier for sure
Maciej 16
Oh thank God it wasn't an raid shadow legends ad
Well good thing u just turned urself into a raid shadow legends ad smartie pants
@@DJ-rx8mv can I get paid for it tho
funny you went through the trouble of disinfecting it....looking back at it now, what was the point lol
Don't be super-shady, Timmy Joe! You can sell that card honestly for what it is without pretending it's something it isn't. If it were me, I'd be excited to have gotten a free 2080 Ti paid for by two videos about it. Plus, I'd think you'd have a sentimental connection to it after your victorious project to make it pretty. Use it for testing if you need a prettier one for daily use. That card is part of channel lore now!!!
I LOVE HOW THAT TABLE MOVES
I bought a Power Color RX5700 XT open box for $293 at Microcenter and a Bykski water block for $72 on eBay. Add in around $10 of thermal grizzly pads and paste and you get 2100+ Mhz easily. Not your 2080 TI level but more than enough for me. And the blower makes a great paperweight!
The only ‘Timmy rigging’ I’ve done on my GPU is replace thermal paste and I attempted very high overclocks if that counts, I learned very quickly what my RX570 is capable of, 1550MHz crashed after a few seconds of stress test, 1441MHz is what I’m running now and 1925MHz on the memory, max temps in stress test are 72C at 70% fan speed
Does changing the thermal paste on a gpu give better cooling????
If that card has a USB C plug on it you can grab +5v from that, you can use 12v on that 5v led, just add a resistor inline (3k to 5k ohm should be fine) (same way noctua makes there LNA cables)
It takes time to build what you have made - hunting for parts etc. Something that some people may think "wow that's cheap", however there are those out there that 'can't wait and have to have it 'now'.
i love how you always include Canadian peco prices timmy, pretty much all other tech youtubers leave us Canadians out.
Hey m8. I'm on my other account, but we've got the same last name!
Thats all I wanted to say. have a good one!
@@homegrowntwinkie hahah awesome thanks man have a good one yourself.
@@tylerbaldwin1633 our dollar is crashing right now
I bought a reference RX 480 back in 2016 and eventually got tired of how loud/hot it was. So I bought an Arctic Accelero Twin Turbo II to replace the stock cooler and it was much better temperature and noise wise.
Recently I decided to remove the Accelero's shroud but keep the heatsink and instead zip tie Phanteks 120 mm fans on it and while it does take up a lot of pci slots now it is even quieter and has cooler temperatures.
I still have the world's cheapest toilet paper . Worth $1000 a roll
You could probably get a replacement connector and after a bios flash it would work
The adapters and splitters you needed at 10:30 are sold on Amazon. Used them a few times when setting up similar 'timmy rigs', keeping fan control for VRM after removing the stock coolers and adding waterblock. EDIT: nice solder job though :)
Great to see you get a cooler that has a monosink for the Vrm and mem. Now you have an awesome 2080ti.
Klip One no....it doesn’t. In no world could you ever say a 2060 beats a 2080ti.
13:54
Timmy: "Temperatures are amazing"
Temp: 69°C
Me: nice
I want a Timmy Joe live stream, just hanging out playing doom, talking with the fans
1:00 I was expecting RAID SHADOW LEGENDS
Same! I swear I wouldve unsubbed😂
Too bad Nvidia wasn't actually selling these for $600-$700. I would have definitely upgraded from my GTX 1080 at that price. Instead, they not only lost me with Turing, but I'll likely switch to AMD if they release an RDNA 2 card in that price range this year.
If everyone bought used rtx 20 cards nvidia gets nothing out of it. And would not get enough sales from Ampere as people would be satisfied with their game performance.
I recently Timmy-rigged a 240 mm AIO to a GTX 1060. Not out of necessity, just because of plain overkill.
By the way, it is a Zotac blower card from a guy that had a prebuild, who upgraded.
Always need to be careful with custom PCB cards and mixing up the parts. You should always go with reference design cards/coolers/waterblocks so they can be swapped out and have interchangeable parts! If you get FTW3/Strix/Aorus Xtreme/Gaming X Trio etc....Also, custom cards do not run much faster than RC do anyway. Just my two cents on the matter.
By the way there is 12 volts small LED diodes, i work at small electronics tech shop and 1 unit goes for 10cents at most, i would just swap that 5 volts led with 12votls thats it
A cheap water block may have been a better option
I still can't believe the seller gave you $300 back, you are one lucky man!
I'm fairly certain you can change the LED color on that card using Firestorm/Spectra. I remember people having issues with that a while back, and you had to download a certain version of the software and you were able to change the LED color, which would stick after reboot and everything.
I'm supposed to be doing digital school right now oops!
I love the timmy rigging. Getting the best performance for such a great deal.
0:59 oh thank gooooood.
me: watches Timmy Joe video : Timmy Joe video YA!
I loved my SLI'd GTX 470's i had back in the day, they kept my room nice and toasty in the winter time, and they where blower types.
I found the same cooler for a cheap 2080ti card on ebay, what was your solution for simplifying the fan operation for the card?
Only reason to get reference design cards is for Watercooling purposes
1st & 2nd Fan controlable , 3rd fan low rate fan it just keep running. of Zotac heatsink
I always wondered: Wouldn't the back plate heat sink on the Accelero work better if the fins went the direction of the typical case airflow? I'm not an engineer, but it just seems...really weird. Even with a wraith cooler, my case airflow is pretty steady front to back. What am I missing here...?
That would be shady to change the bios. I'll take it if your hands for 750 us plus the shipping. And it looks much better this way.
He paid $800 for the card and $80 for the cooler after all was said and done. You expect him to take an almost 20% loss for you?
Kudos to @TimmyJoe! I didn't know you could do this! Makes me want a 2080 ti
i have a 1660ti with Accelero 3 and LM. max temp of 46C on core.. +1,500 on memory stable on all games and benchmarks. core runs at 2130-2145
I am so much more a fan for life @Timmy Joe with your add in new sponsor @Word of Warships. My fav game for 2 years now. Thanks for your content, no ones is equal to the way your running your channel Sir!
What's be really cool is if you found like an old xaiser ii or something, and oem Dell/Alienware mobo, and 2080 ti with the accelero, and made the most ballin' sleeper pc
Tired of a blower fan? I've had a reference GTX1070 proper founders in my case, with custom fan curve, it never gets over 60 and is barely audible... not sure what the big fuss is
I seen an MSI Meg back there.. Really nice job Timmy. I really like it! Take a black sharpie and run it around the edge. It looks nice man. I'd take it over the 1200 I paid for the EVGA XC Ultra.
You can’t call this the cheapest 2080 Ti anymore. I picked one up for $600 USD over the weekend.
1:44 anybody notice the small vocal cut on the word credits? I bet he said coins at first 😂
I said points lol
idk why, but I LOVE the way it looks. I would show it off, proudly flexing it was significantly cheaper than any 2080Ti
i like it when people say " beat em up" when they talk about getting a good deal , made me lol
I can get my titan x pascal to 2.1ghz with 2 130cfm fans on its rad because this things silicon quality is amazing but only problem is if i go above 35c it becomes unstable
Timmy joe you can use that green pcb 2080ti and buy a green z390 motherboard, use standard no heat spreader ram, or some ram that looks like its out of the late 90s/ early 2000s, use a ketchup and mustard psu, a floppy drive, Zip drive, optical drive inside of an old fashioned case, and fill the thing up with controller cards, sound card, nic, wireless, etc. all green pcb. You would have a power house ricer pc that looks like a 1990s office pc. If you could use flat ribbon cables it would look even better. Please. I have to see someone do this. I have to.
The Morpheus II Core Black Edition is a good looking 3rd party cooler with 12 heatpipes. It can cool a VEGA 64 at 1750MHz no problem. That's also with the HBM2 at 1150MHz. I also found a heap of Gigabyte GTX 1080ti Turbo's. Yeah, there blowers but, not just any blower. They do use Vapor Chamber's and they have great VRM's. $400 all day long. So, $400 for a GTX 1080ti and about $70 for a Morpheus II Core 2 Black Edition and you got a beast of a set up for under $500. Not to shabby. Either that or get a Radeon VII for $550.
Yeah but for the same money as a Morpheus II and fans you can get a NZXT G12 bracket + 240mm AiO.
Had a 2080 amp with that cooler. Such a beast. Highest temp I ever saw on it was 63° on auto fan.
I just bought one of the cheapest 2080 ti out there. PNY XLR8 for 700 usd with a ek water block.
Hey Timmy Joe!!! Love your channel, I've been hooked on these videos with cooler changes. I have a Blower style 1070ti and would like to find a more efficient cooler for it. How do I find info on what would fit?
It's a nice card now TJ. I like air cooling and big heatsinks and I do not lie.
They should Run a Design competition for the community and winner gets their design out and paid or whatever -
I love when this guy stops talking... It's such a relief!
Nice profile pic,you fugging creep
Why don't you paint the pcb with enamel paint? You need it for benchmarking, so it need not go anywhere. You could use the snow and rig a TimmyIce Cooler to it?
For the record, I saw it reach up to 2.03GHz. That's friggin' fast, dude. XD
The green PCB is actually cool.
Final step for this card is probably to put a waterblock on it and stick it in a custom loop..
Huh, I wonder if I can get another Zotac 2080 ti heatsink/fan and replace my Zotac 2080 ti twin fan
I put the xtreme iv on my blower model 2080 ti and it's made a 20C improvement. Looks bad but I think it's well worth it.
U could have just brought the evga version which goes for 1100 bucks, wouldnt have faced problems in the first place
I remember buying the EVGA 1060-6GB card. Still working to this day! Bought it for $300 USD on eBay. It was a mining card before, but still works a treat! It has been 4 years now since I bought it, and I think that was bitcoin market had crashed. Only thing on it is that I cannot change the voltage on it. Is it something to do with it being locked in its BIOS for that card? System I have is a Core-i7-6700 non-K, 16GB of DDR4 Ballistix Sport RAM that is XMP enabled, an MSI B250 PC Mate, along with a NZXT case. This is the system I had built myself. I would love to send you the rig,s picture and such for you to see. :) altho.... My wiring in it is kinda poop. XD. CHEERS!
Just get a 12v led for $2 and wire it in. Jeez Timmy.
Edit: Also you can paint the green pcb black (or just the exposed parts if you prefer) without any drama. I've done it many times with gpus, ram, wifi cards etc.
GOOD JOB, I feel like I have closure on the 2080 TI now.
came from your 2080ti cheap card fix.... good to see youve managed another upgrade... but is it a 3090??? 1.25
i actually like the back heatsink, i just ordered a EVGA 2080TI FTW3 OC ULTRA, you think that backplate can be swapped for the accelero one? extra cooling from the backplate too hell ye!
Next time heat shrink those solder connections!
Cooler master makes an rgb controller with 12v molex
I mean.... Couldn't you just slap a waterblock on there and call it good, rather than getting these air coolers?
In his other lab sits an Omnidroid waiting for its next command......
So you custom built yourself a Zotac 2080 Ti Amp Edition out of that overheating OEM card. That's hilarious.
I was able to pick up a cooler from a company that watercools their 2080ti's its from a MSI GeForce RTX 2080 Ti VENTUS. I had to do the same thing and solder the fans together no biggy. my issues i cant seem to control the fan speed. MSI afterburner recognizes everything but adjusting curve / trying to manually they just seems to be on a constant spin
Not sure if you can run precision x1 on a non evga card but it has a vrm and memory temp monitor. Also, please don't sell it unless the person buying it knows it's not a legit zotac card.
Is there a case with an front display on it?
"hey its a orange light" then proceed soldering under the toilet tissue. Yep thats a safety tips for you guys 😂😂😂
I would’ve just bought the nzxt liquid thing for gpus
do water cooling. then frame that 2080ti on your office. It needs the highest respect it can get.
The cooler will work for the 2080 normal? Cuz i have the card and i want the cooler, pls help if u can
i'm having a hard time finding a rtx 2080 super gpu cooler to replace my asus rtx 2080s turbo blower cooler with. this was really informative
Asus doesn't use a reference PCB for the turbo
ChillyFilly Gaming according to ekwb block configurator they do.
Can you put that heat sink from china on a 1080 ti?
i have the same artic fan on my gpu lol....i dont have the back plate though, still works good keeping temp down...
for me the cheapest one is a KFA2 GeForce RTX 2080 Ti EX
Is the old artic cooling accelero 4 compatible with that GPU or only the Rev2 ?
A few years and it will be 25 bucks just like all the others. Sticking with my GTX970 till it really has to be upgraded. No persuasions yet.
Really cool video. Glad I clicked, this 2080ti has been a little bit of a journey