DIY Pressurized Water for Overlanding/Camping/Boondocking (UPGRADED)

Thanks to your suggestions, my original DIY overland water system gets a MUCH needed upgrade! This one takes only minutes, and provides a reliable source of 5 gallons worth of pressurized water for your overland or camping trips! No longer do you have to spend time pumping water like a peasant.
Previous Video: • CHEAP DIY Pressurized ...
Parts List:
1. Scepter Water Tank: www.lowes.com/pd/Scepter-5-Ga...
2. Water Spout: www.amazon.com/dp/B09LV11BDG?...
3. 3D Printed Parts:
a. www.thingiverse.com/thing:531...

[@scuzzyfpv]

I got my adapter for my scepter from FirecrateUSA and this setup makes life so much easier than hand pumping or gravity. I went a step further and added a sawyer water filter inline with the upgraded hose that comes with the adapter which required no modifications. I love knowing i can just grab water from the lake or stream without much fear.

[@jolton49]

I just printed your cap and used a scepter bottle and everything fits perfect! Excellent design on the cap and elbow!

[@hillogical]

This is friggin awesome.

[@DocWrangler]

Great video, thanks for the knowledge drop!

[@RhinoOffroad]

Anytime doc

[@Venture2Roam]

Great idea..I'm currently rethinking my water set up.

[@RhinoOffroad]

Thanks man, I actually got it from another TH-camr but stoked with the results so far

[@trailhunterusa]

Thanks for tips. I'll give this a try.

[@RhinoOffroad]

Let me know how you like it

[@MorganGlassco]

I've got a very similar project going on. I have wavian Scepter can and a similar pump. At home my pump pushed onto the scepter cap and held pretty good. Out camping it kept popping off. So I have been planning to fashion up something and 3D printing crossed my mind. This is perfect. Thanks for posting

[@RhinoOffroad]

That sounds sick! Let me know how you like it

[@MorganGlassco]

@@RhinoOffroad already found a local printer to print the parts. Seriously stoked

[@christopherlamb7386]

one little tip if I may,attach a stainless steel nut to the end of the tube as I found that sometimes a bubble makes it float up.

[@ovrlndtravel]

Awesome thank you!

[@flyfisher530]

Great video Kevin! That place looks oddly familiar but a bit smoky I am guessing from the Mosquito fire!

[@michaelptm2269]

Hand pump it like a pesant… idk why I found that so funny 😂

[@RhinoOffroad]

Haha

[@hayesginther897]

This is a great idea that spout reminds me of the Dometic spout but for a fraction of the price. Im gonna have to give this a try. Ive even got a 3D printer.

[@RhinoOffroad]

Sounds like you just cut $20 off of your costs!

[@HLsab]

Being from Australia water is seriously a life or death situation in the outback . Most overlanders here carry minimum 2 separate water containers (if one gets a leak you have the other to use) I watched the hand pump vid and it was good but as we know it failed , I see the same issue with the usb charged pump , if it fails you’ll be pouring it out . Check out an Aussie guy called Tim Bates , he has a vid on a gravity fed 20 litre container that is bulletproof. Love your vids Rhino , cheers from Australia mate .

[@RhinoOffroad]

Thanks for the input, will do!

[@TrailNewbie]

I need to do this

[@RhinoOffroad]

Let's do it!

[@abdullahmahmood3040]

So I just got the same spout in the mail. It’s quality and cool. Got the neck 3D printed. You do anything to have the 2 pieces from shifting back and forth? My spout will move constantly, kinda annoying. Wish I went with the neck mount only without the cap

[@RhinoOffroad]

No I have the same issue and haven't figured out anything for that yet. Let me know what you come up with!

[@reidmartin3479]

I bought the same pump and the flow rate/pressure on mine is a bit less

[@blt981]

48 wait..I’ll be parched and dead