Dude, I'm here about the bikes, the scenery shown, the little tech tricks....but man I love your commenting. Dude , you're simple, not coming from money and you like what you are doing. I like it.
my good god, i don't love any bike enough to try to tackle that manner of a faff job. Good on you for the patience and perseverance, better man than I.
Mine is the E mate. I had the grown up version, but it was defective and then out of stock! The E version is a chunk heavier, but the function is exactly the same. You just don’t get the fancy carry case!
Full marks for patience and the end result ! I would have definitely thrown it out of the window……….and have done so with some tricky wallpaper in the past. So many different shapes and direction changes but such a lovely looking tank (sans badges 😉). Enjoyed that one, many thanks 👍
What a cracking job !!! I did my hubbies vespa panels.....they are hideous !!! I think you should be well pleased with that. I will redo his panels when ive earned more money for the swear tanker i filled 🤬
Excellent work. I don't think you could have chosen a more difficult shape. Respect. Good old cable ties, so many uses. Ask Mrs Traveller. Looks really cool too. Kalpa! As we say on Kronos. Happy travels
You'Re right there! I told myself it would be easy while I was planning! But once on the table, it was way worse than first thought! Mrs Traveller sounds like a lucky lady! ;D
God this was hard to watch! It must have been so hard not to get cross and annoyed. You did a great job in the end. I would have given up and put it in the bin. Well done for completing it.
It was, as ever, a challenge! This was probably the most difficult yet, so there was a fair bit of muttered swearing. Trust me though, the bin was always just a moment away!!
Andy, I was just sat here wondering what to do to freshen up my motorcycle & this video pops up. I was tempted to wrap my tank after your previous wrapping video.
Cheers Simon. Totally worth it. The reason i bought the bike is because i like that colour! This way i get the same colour, but in brushed metal effect while also protecting the paint from future scuffs and scratches.
Brilliant job U did anyways. I am doing my car right now, and it is the first time I'm doing it, and I have quite a lot of mistakes. But if you don't try it you will never know. And I will do my car again in the future just to get better at it. Cause it is a fun thing to do! 🤙👍💪 brilliant mate!
@@AndyManCam the process is hard but after time you understand the vinyl. Not that I fully understand but I'm getting there. I must have watched 200+ hrs of vinyl wrapping videos by now. But I will keep up doing it. But it did look class on the bike at the end! Brilliant 🤙💪
Haha! At least with this vinyl you get a few attempts before it's ruined! One slip with the sellotape and you have to start over with the christmas presents!
For an amateur was not too bad, actually. But, tbh, I'm curious how the edges are holding since then. 1st, brushed look vinyls can be very challenging anyway, it must be tackled carefully to keep the lines nice and not distorted. 2nd, trying do wrap in one piece a bike tank is another big challenging job. 3rd practice is a good teacher 😉 If you want my advice, for a future wrap, - place the tank on a stand, so it gives you access to work easily on the bottom, - ask a friend for help, much easy to work in 2 (3 even better) - heat the vinyl with a proper heat gun, to 50° - pre-stretch the vinyl then place it on the top and try to mold it to the shape of the tank - while you are doing this, be careful not to over-stretch the vinyl !! - heat the vinyl on the recessed areas, so the memory of the film will shrink it back to the original state ( like this you won't have so much material to work with and trying to get rid of it) - try not to over heat and keep stretching the vinyl, to avoid stretch marks and glue lines - go with the vinyl under the tank so it gives you a inner peace that won't start to peel off with time. Voila!
And another thing, when you are heating the material to stick it in a recessed area, don't stick it from the middle, as you will put too much tension in the vinyl. Instead work it in from the lowest tension point to the highest tension point. Hope it makes sense
Thanks. Good tips. I don’t think I’ll be doing it again in a hurry though! I did however watch on the official 3M tutorials that they recommended heating and then working from the middle of a recess outwards as this spreads the tension across the space, instead of causing it to ramp up the further you go.
Shaun (TheLikeableRider) get your hand in your pocket and buy that man a pint, a bet is a bet. Top work fella and like most things in life, they say you get better at it the more you do it!!
I actually didn’t bother until i finally removed the vinyl. But the replacement knee pads that i got from R&G suck just as well as the first set. I.e, they were off again within a week!
Nice job. I think the colour and finish of the vinyl wrap possibly highlight the imperfections. If you do it again, try starting at the back of the tank and work forward so that you're starting at a narrow point and working your way out.
100% recommend draining the fuel. More due to the weight than the risk of fire! I had to carry it up 5 flights of stairs, so any weight saving was welcome. But even removing the tank from the bike is easier when it doesn't weigh an extra 16Kg or so on top of the weight of the steel!
@@AndyManCam Thanks Andy, I want to wrap a plastic tank and I ain't got no stairs, but sound advice nontheless. Your tank looks good from here, but I guess it depends on how much of a perfectionist you are!
I think most importantly, if you accidentally drop an empty tank, it's far less likely to destroy itself on the floor! Good luck with the wrapping mate!
Thanks for the demo, I have a 2018 cb1000 and the tank is showing its battle wounds so I’ve considered a repaint. But this looks like a great way to accomplish the same goal. I have a heat gun, the kind used for striping paint. Or in my case as a pastry chef for removing bon bons from their casting molds. But anywho, do you think it would be too aggressive for this job, or a nice upgrade from a hairdryer? Anyway great channel, I’m enjoying all the cb content. I think I’m going to get some of those sw foot pegs you installed on the cb for added comfort. They look great!
And thats a Wrap! You did that so go I thought you had done it before. The shape of that tank is a problem. I have thought about doing my tank it has a bad jacket zipper scrach on it. But I would have to sand it smooth so it wouldn't show through the wrap? Replacement tank painted about $900.00. Anyway good job man!
I've had a few attempts on other bike bits, but this tank was the biggest challenge yet! I had a scratch on my FZ1 tank and it didn't show too badly through the wrap. Perhaps with a textured vinyl, it'll hide even more?
Thats not a bad job Andy, i think it would have been painful to watch the original footage, but the time lapse worked great. It looks a lot cleaner without the Honda logo on the tank. Your a brave man attempting this one, i would have given up within minutes i think :)
Good effort 👍🏻 it would have been in a crumpled up ball in the bin if I’d have tried that. I have though about doing the lid of my topbox in a similar brush metal finish to hid a few wee scratches and better match my bike. But that vid reminds me of the faffage of it.
Hope you're not too disappointed with the job. At the start I'm thinking "no way". Amazed you got it on there at all. Looks great to me, and it's all good experience. Sure you'll get it to your own high standards if you have another go at some point. 👍
No, not at all. Once on the bike and with a Bit of Road dirt on it, it doesn’t look at all bad! Just don’t think it’ll last a winter. I reckon the next attempt will be better!
Hey Andy, I think you did an amazing job for an amateur! I have spent a little time in the RC airplane world where I've also applied self adhesive stretchy vinyl, though not over anything so compoundingly complicated as that tank. Well done!
Cheers John! I'd possibly go as far to say that sometimes the bigger things are easier to wrap than fiddlier small things! That said, I'm not looking forward to attempt two on this tank!
It may not be spotless perfect but you did a bloody good job, tempted to say much better than most of the so-called professionals. Double kudos mate! I'd have thrown the thing over the window ten times over ha ha ha.
Thanks JB. Simply the fact that I didn'T want to immediately tear it off was already a win for me! I'll try again when the bike is shored up for winter!
I can see you really need patience of a saint for a rapping job. And apparently the better the quality of the vinyl the better quality of the Finnish. I say well done ole son. Good job.👍👍👍 If I could offer any tips. It would be to try using a soft cloth and or sponge on some of the difficult surfaces. And wherever possible, Less is More??
Haha! Good question! I stripped a bolt holding the clamp on to the top yoke, while i was changing the bars back to stock. While drilling it out, i destroyed one corner of the bar clamp! 🤦🏻♂️ So i had to replace it with an eBay special and kept the old one as a Souvenir!
Seriously well done I put two clear tank protectors on my vstrom first side shit second side perfect went back to first side and ripped it off and through it in the bin.whats that saying a man on a galloping horse at 30 mph wouldn't be able to tell the difference 😂
awesome job!!!!.. but I think the table was a big problem, next time try using a saw horse, mount you brackets to the saw horse, then the tank to the bracket on the saw horse, what way the table top is not stopping you from folding the wrap down, and around the tank.
@@AndyManCam I love you channel, and I'm sure you've heard this before especially from us Yanks you have an awesome voice and that makes your videos even that more enjoyable
Thanks Haydn! Patience gained through years of simply learning to hide my burning rage! 🤣 The screen is from SW-Motech. They sadly stopped selling it for the CB, but it’s available for many other bikes.
Andy I think there's a lot of married fathers out there that agree with your sentiments... Can't do anything at all about the stretch marks, just going to have to see how long they can take it and what to do about it! 😏
Thanks John! I'm still not decided as to whether or not I want to put the quick shifter on. In any case, it wouldn't be the 800€ Honda unit! That's too many $$'s for my tastes! :D
Looks a great job in fairness. The difference removing the honda badge made was unreal, looked so much better without it.. You have the patience of a saint , i'd have ended up in the pub swallowing truckloads of Guinness...LOL
Cheers Mick! I totally agree with the badges. Even if I hadn't wrapped it, the badges needed to go anyway! A poor effort on Hondas part there! The guniess option doesn't sound too bad either though! ;D
Seriously impressed with your patience. My concern is whether it will be worth it. I have my top box lid wrapped and it's not as hardy as I'd like. Fingers crossed for yours 🤞
Thanks Scotty. TBH, if it protects the tank from a few stonechips and scuffs, at it's own expense, then it will definitely be worth it. I'll probably feel like a change of colour/texture/design before the vinyl is toast anyway! :D
You're one hell of a HERO. Great job. Some professionals wouldn't attempt that in 1 piece. Question, u mentioned a tour coming up? It's not the Alps tour that you just uploaded is it?
I would love to do another before the winter comes, but it’s not looking overly likely! Still 3 days of the Austria trip for me to put together though. 👍🏻
The question you always have is ‚why does he have a travel hairdryer?‘ seems a bit specific 😜 In any case, the answer is because a travel hair dryer is what i have. The overall why question is explained in the intro to the video. To protect the tank while simultaneously giving it a brushed metal look.
@@AndyManCam hah sorry, the joke is a little less accurate atm but the last few videos I watched you in you were incredibly hairless - just struck me as funny that you have a travel hair-dryer :)
@@tenkasen Haha! Very good point! Naturally I had to swipe it from the Mrs when she wasn’t looking! The travel variety was easier to stash in the pocket!
I know that you have already wrapped the tank, but I'm assuming that the marks you talk about are rub marks on the fuel tank sides, hence why you put the R and G stuff on, but you can machine polish the marks out, as its only on the clear coat, much easier to look after than wrapping the tank like this....but each to their own.....👍👍
Yeah I think they are just in the clearcoat. This was more of an attempt to stop them getting any worse TBH. That it's happened after just 1 year of ownership despite me being pretty careful about zips and seams on the paintwork worried me a lot!
@@AndyManCam all metallic paints are the same Andy, they are water based these days, I'm a motorcycle detailer and I deal with this sort of thing on a daily basis...
Ideally you should’ve pre stretched the vinyl and covered the top, then as you heat the sides it shrinks back and takes away a lot of that excess you were left with. You need to hit it afterwards to about 85-90 degrees to kill the memory so a heat gun and thermometer is essential. Good effort though
Your getting abit of a dab hand at this wrapping business Andy, one day might do me fazer 600 , quite like this colour , hopefully you might have left a link to were you got it ,,m cheers shane uk 🇬🇧
Nicely done Andy, far more patience doing that than I'd have had... would def have gotten launched out a window if I'd been having a go! :D Be interesting to see how you get on with attempt no2 when you get the chance :-)
Cheers mate. It was borderline for a while there! I always find this process incredibly nerve wracking! But turned out ok. We’ll have to wait and see what happens with round 2!!
great video! 99.99% of us are amateurs too, so we are happy to see you doing such a great job! It inspires us to try also! Have a great 2024!
Thanks very much Paulo. Give it a go, i say! It’ll only cost time and the vinyl really isn’t that expensive. Good luck!
Dude, I'm here about the bikes, the scenery shown, the little tech tricks....but man I love your commenting. Dude , you're simple, not coming from money and you like what you are doing. I like it.
Thanks mate. I really appreciate that! Thanks so much for watching!
Would love to see it live. Good job for an amateur and a 1st time.
Thanks Marius! This was almost live! I left all the back and forth in for the torturous enjoyment of all! 😂
@@AndyManCam 😂
Great job ! Now all you need is classic Honda badges 🙂
my good god, i don't love any bike enough to try to tackle that manner of a faff job. Good on you for the patience and perseverance, better man than I.
Haha! I think that if it weren't for the videos and the resale value, I might have left it as well! ;D
What a great job Andy. In short, when we grow up we wanna be like you. Inspired!!
Thanks Doug! The pressure is on, if I'm to continue this role model thing! 😜
Lovely job matey! OK so what slider are you using, love that look?
Cheers Chops! It’s one of these mate: MOZA Slypod: amzn.to/3sV6dQ8 not cheap, but very good!
@@AndyManCam is yours the E version Andy? Just about to press the buy button! Costing me money again you swine! 😎👍
Mine is the E mate. I had the grown up version, but it was defective and then out of stock! The E version is a chunk heavier, but the function is exactly the same. You just don’t get the fancy carry case!
@@AndyManCam OK thanks Andy 👍
No worries! Happy sliding! It’s addictive once you start! 😉
Full marks for patience and the end result !
I would have definitely thrown it out of the window……….and have done so with some tricky wallpaper in the past.
So many different shapes and direction changes but such a lovely looking tank (sans badges 😉).
Enjoyed that one, many thanks 👍
So THAT'S where the badges went. It looks good mate, well done!
All becomes clear! I think you'Re possibly the only person who noticed the missing badges in the vids though. Good eyes!
@@AndyManCam well, I just bought a 75" TV lol
Haha! That’ll help! 🤣
a brilliant job. the minor blemishes are barely noticeable. Well done you.
Cheers David! It really did look a lot better once on the bike, with all the trimmings back on too!
Well done Andy, I would be crying and asking for my mum half way through any attempt at doing this. 👍
Haha! If it weren't for the cameras... ;D
Pretty amazing considering the multiple angles.
Thanks mate! It was a bit of a disaster of direction!
What a cracking job !!! I did my hubbies vespa panels.....they are hideous !!! I think you should be well pleased with that. I will redo his panels when ive earned more money for the swear tanker i filled 🤬
Haha! Thanks!
Excellent work.
I don't think you could have chosen a more difficult shape. Respect.
Good old cable ties, so many uses. Ask Mrs Traveller.
Looks really cool too.
Kalpa! As we say on Kronos.
Happy travels
You'Re right there! I told myself it would be easy while I was planning! But once on the table, it was way worse than first thought! Mrs Traveller sounds like a lucky lady! ;D
You Sir, have more patience than me!
Many hours of swearing, fuming and ranting to reach that patience level! The struggle is real! ;D
Splendid colour. You have a lto more patience than me. Two minutes in and I would have ripped it to shreds in anger.
Haha! I felt like that at times too mate! The colour is really cool though!
@@AndyManCam It certainly looks it in the video.
Great first attempt, cant imagine the patience that took .
Thanks Mark! My patience has reached monk like levels!
God this was hard to watch! It must have been so hard not to get cross and annoyed. You did a great job in the end. I would have given up and put it in the bin. Well done for completing it.
It was, as ever, a challenge! This was probably the most difficult yet, so there was a fair bit of muttered swearing. Trust me though, the bin was always just a moment away!!
Production quality on this vid was top notch as per usual. Keep it up mate :)
Thanks, will do my best!
Andy, I was just sat here wondering what to do to freshen up my motorcycle & this video pops up. I was tempted to wrap my tank after your previous wrapping video.
It's well worth a crack mate. 30 quids worth of vinyl and a free afternoon is the most it can cost!
@@AndyManCam I'll give it a try
Good luck and be patient!
Hats off to you Andy for tackling that one, was it worth all the pain, it doesn’t look that different
Cheers Simon. Totally worth it. The reason i bought the bike is because i like that colour! This way i get the same colour, but in brushed metal effect while also protecting the paint from future scuffs and scratches.
Fair play mate it looks good, I tried wrapping a while back and gave up. Didn’t have the patience and through a hissy fit.
Patience is definitely the key! Mostly because for 90% of the time it looks like it couldn't possibly turn out good!
Thanks for posting. You are a more patient person than I am. In my case, the vinyl would have ended up all balled up and in the trash.
My pleasure mate! Thanks for joining in with the torture with me!
Brilliant job U did anyways. I am doing my car right now, and it is the first time I'm doing it, and I have quite a lot of mistakes. But if you don't try it you will never know. And I will do my car again in the future just to get better at it. Cause it is a fun thing to do! 🤙👍💪 brilliant mate!
That's the best way to learn! Glad you're enjoying it. I liked the finished result but HATED the process!! 😅
@@AndyManCam the process is hard but after time you understand the vinyl. Not that I fully understand but I'm getting there. I must have watched 200+ hrs of vinyl wrapping videos by now. But I will keep up doing it. But it did look class on the bike at the end! Brilliant 🤙💪
Good Job don't be so Critical my self failed every year by wrapping Christmas gifts so be proud of your self
Haha! At least with this vinyl you get a few attempts before it's ruined! One slip with the sellotape and you have to start over with the christmas presents!
For an amateur was not too bad, actually. But, tbh, I'm curious how the edges are holding since then.
1st, brushed look vinyls can be very challenging anyway, it must be tackled carefully to keep the lines nice and not distorted.
2nd, trying do wrap in one piece a bike tank is another big challenging job.
3rd practice is a good teacher 😉
If you want my advice, for a future wrap,
- place the tank on a stand, so it gives you access to work easily on the bottom,
- ask a friend for help, much easy to work in 2 (3 even better)
- heat the vinyl with a proper heat gun, to 50°
- pre-stretch the vinyl then place it on the top and try to mold it to the shape of the tank
- while you are doing this, be careful not to over-stretch the vinyl !!
- heat the vinyl on the recessed areas, so the memory of the film will shrink it back to the original state ( like this you won't have so much material to work with and trying to get rid of it)
- try not to over heat and keep stretching the vinyl, to avoid stretch marks and glue lines
- go with the vinyl under the tank so it gives you a inner peace that won't start to peel off with time.
Voila!
And another thing, when you are heating the material to stick it in a recessed area, don't stick it from the middle, as you will put too much tension in the vinyl. Instead work it in from the lowest tension point to the highest tension point. Hope it makes sense
Thanks. Good tips. I don’t think I’ll be doing it again in a hurry though! I did however watch on the official 3M tutorials that they recommended heating and then working from the middle of a recess outwards as this spreads the tension across the space, instead of causing it to ramp up the further you go.
@@AndyManCam yes, you are right about the recessed area. I was almost falling asleep when I was writing the comment 🙃
Haha! Not often I’m right about things like this!! 😅
Fair play to you for having a go Andy, an admiral job! 👍
Cheers Mike. No risk, no fun!
I’m about to wrap a Superduke tank and you gave me some confidence 🙏
Happy to help. Hope it went/goes well!
Shaun (TheLikeableRider) get your hand in your pocket and buy that man a pint, a bet is a bet. Top work fella and like most things in life, they say you get better at it the more you do it!!
Hear hear! Cheers Mark! Next time will be a belter… maybe!
Good results considering 1st attempt!
Cheers HG! YOu could certainly say that it went better than any of us were expecting!
@@AndyManCam I would have lost my rag 2 mins in and scrapped it!
Looking really good. De badging is definitely the right way to go.
Thanks Ian, I think so too!
You get my vote Andy.....great job.
Thanks very much Fitchy!
Excellent job, more patience than me, love that tape but I would have paid somebody
Amazed it came out as well as it did. I would definitely started crying half way through. 👍
Me too mate! I had my moments of considering chucking it down the stairs!
Nice job! Were you able to put the R&G knee grips back on?
I actually didn’t bother until i finally removed the vinyl. But the replacement knee pads that i got from R&G suck just as well as the first set. I.e, they were off again within a week!
You're getting good at these Andy! 👍🏽
Thanks! Maybe on the next one or maybe the after that, I’ll finally be happy!!
You have done the imposible..i did not think that was possible..but you have done it..i have take the wrap throw it to the moon..
Haha! Thanks Mr Smith! It was a bit like looking at the soon to be scaled cliff face at the beginning!
I must say you did a very good job for your first attempt. I tought this was going to be a disaster. he who dares he who dares
Cheers Gijsbert! I must admit that my hopes were also relatively low!
Andy well done mate, i think Likeable rider needs to dig deep into his pocket especially after your fisrt attempt keep up the good work
Thanks Glenn! I shall enjoy that beer very much! :D
Nice job. I think the colour and finish of the vinyl wrap possibly highlight the imperfections. If you do it again, try starting at the back of the tank and work forward so that you're starting at a narrow point and working your way out.
Sadly youre absolutely right. Someone of my skill level should probably stick to plain colors and abstract patterns!
Well done. I am impressed.
Thank you kindly Mr Brodin.
Do you recommend emptying the tank before removal, or is the rag in the filler hole sufficient?
100% recommend draining the fuel. More due to the weight than the risk of fire! I had to carry it up 5 flights of stairs, so any weight saving was welcome. But even removing the tank from the bike is easier when it doesn't weigh an extra 16Kg or so on top of the weight of the steel!
@@AndyManCam Thanks Andy, I want to wrap a plastic tank and I ain't got no stairs, but sound advice nontheless. Your tank looks good from here, but I guess it depends on how much of a perfectionist you are!
I think most importantly, if you accidentally drop an empty tank, it's far less likely to destroy itself on the floor! Good luck with the wrapping mate!
Andy, what was the finishing strip you placed on the edge when it was done? Regular desk tape?
It was just a strip of the same stuff, cut to about 10mm thick.
Wow thats really impressive Andy! Top job!! Aaron Knox
Cheers Aaron! It turned out both better and worse than i was hoping/expecting!
Great result Andy. Deffo the type of job I would have f****d up due to lack of patience… Enjoy that pint 🍺
Patience is definitely the key here! I blocked out the whole day for this job and had the kettle at constant readiness!
Patience’s of a saint 😀. Mine would be in the bin 🤪.
Andy did have to drain the gasoline out of the tank before you started the work on the tank ?
I siphoned all but a few drops out. Not least because I had to carry the tank up 5 flights of stairs to the kitchen!
Good thinking!
Thanks for the demo, I have a 2018 cb1000 and the tank is showing its battle wounds so I’ve considered a repaint. But this looks like a great way to accomplish the same goal. I have a heat gun, the kind used for striping paint. Or in my case as a pastry chef for removing bon bons from their casting molds. But anywho, do you think it would be too aggressive for this job, or a nice upgrade from a hairdryer?
Anyway great channel, I’m enjoying all the cb content. I think I’m going to get some of those sw foot pegs you installed on the cb for added comfort. They look great!
Looks pretty damn good!!
Thanks very much Craig!
And thats a Wrap! You did that so go I thought you had done it before. The shape of that tank is a problem. I have thought about doing my tank it has a bad jacket zipper scrach on it. But I would have to sand it smooth so it wouldn't show through the wrap? Replacement tank painted about $900.00. Anyway good job man!
I've had a few attempts on other bike bits, but this tank was the biggest challenge yet! I had a scratch on my FZ1 tank and it didn't show too badly through the wrap. Perhaps with a textured vinyl, it'll hide even more?
Good on you for giving it a go. 👍 Great vid Andy 👌
Great Job , THX for sharing! ✌️
Thats not a bad job Andy, i think it would have been painful to watch the original footage, but the time lapse worked great. It looks a lot cleaner without the Honda logo on the tank. Your a brave man attempting this one, i would have given up within minutes i think :)
Thanks Phil 👍 Yeah the realtime experience was a bit arduous! Definitely way better without horrible plastic badges!
Good effort 👍🏻 it would have been in a crumpled up ball in the bin if I’d have tried that.
I have though about doing the lid of my topbox in a similar brush metal finish to hid a few wee scratches and better match my bike. But that vid reminds me of the faffage of it.
Cheers mate! I always forget the faff and feel so positive about it, until i get one deep in it again and regret it immediately!! 😂
@@AndyManCam “Regrets, I've had a few
But then again, too few to mention” Elvis
🤣🤣🤣
holy wrap mate, i think it ill end as a vinyl ball here lol!
Haha! I know exactly what you mean! The pressure was really on when I realised I didn't have enough wrap for a second attempt!
Look s good to me. It is a good idea the tank always seems to get scratched up. 😎👍
Cheers Garth. Absolutely mate. SOftest paint I have ever known! If only I could wrap the engine too!
Have you ever used plasti dip or any other spray wrap on your bike?
I used it on a helmet and it held up really well for 2 years.
I haven’t but it’s something I’ve considered. I’ll have to try it at some point.
Hope you're not too disappointed with the job. At the start I'm thinking "no way". Amazed you got it on there at all. Looks great to me, and it's all good experience. Sure you'll get it to your own high standards if you have another go at some point. 👍
No, not at all. Once on the bike and with a Bit of Road dirt on it, it doesn’t look at all bad! Just don’t think it’ll last a winter. I reckon the next attempt will be better!
Nicely done mate👍
Cheers Moff!
Top job Andy! Looks awesome 👍🏼👍🏼👍🏼
Cheers mate! It’ll certainly do for the rest of this season!
Brave man Andy. I don’t have both the skill or patience for that job. Looks good though. 👍🏍🇦🇺
Cheers Russell. You don’t know until you try! 😉
Hey Andy, I think you did an amazing job for an amateur! I have spent a little time in the RC airplane world where I've also applied self adhesive stretchy vinyl, though not over anything so compoundingly complicated as that tank. Well done!
Cheers John! I'd possibly go as far to say that sometimes the bigger things are easier to wrap than fiddlier small things! That said, I'm not looking forward to attempt two on this tank!
I think it looks great. You are brave to take on a job like that!
Looks fantastic mate! You're putting ideas in my head...
Cheers mate! Go for it!
good job for a 1st time.....how long did it take u to do it?
Thank you Jalal. It was about 3 hours altogether i think.
It may not be spotless perfect but you did a bloody good job, tempted to say much better than most of the so-called professionals. Double kudos mate! I'd have thrown the thing over the window ten times over ha ha ha.
Thanks JB. Simply the fact that I didn'T want to immediately tear it off was already a win for me! I'll try again when the bike is shored up for winter!
I can see you really need patience of a saint for a rapping job. And apparently the better the quality of the vinyl the better quality of the Finnish. I say well done ole son. Good job.👍👍👍 If I could offer any tips. It would be to try using a soft cloth and or sponge on some of the difficult surfaces. And wherever possible, Less is More??
Absolutely Paul. The cheap stuff isn’t worth the plastic it’s made out of! Less is definitely more though. For me, that means less wrapping!! 😅
@@AndyManCam Andy I will say that your video has given me confidence to av a go.
Glad to hear it. Hope it all goes/went well. 👍🏻
OK, really curious: If you still have the handlebar mount from the Versys, then what was attaching the handlebar when you sold it?
Haha! Good question! I stripped a bolt holding the clamp on to the top yoke, while i was changing the bars back to stock. While drilling it out, i destroyed one corner of the bar clamp! 🤦🏻♂️ So i had to replace it with an eBay special and kept the old one as a Souvenir!
Well done sir……. the tank looks amazing 👍🏻
Good job 👍🏻 looks good on the bike.
Seriously well done I put two clear tank protectors on my vstrom first side shit second side perfect went back to first side and ripped it off and through it in the bin.whats that saying a man on a galloping horse at 30 mph wouldn't be able to tell the difference 😂
That tank would of gotten the sledge hammer half way through if it was mine! LoL those wrinkles freaked me out!😂
I remember you do like that by your bike before Kawasaki versys 👌👌
Good memory! That feels like a lifetime ago now!
You sir, have infinitely more patience than I!
Good job Andy, how long did it take just to do the wrapping part, not including the prepping or removing and refitting of parts ?
Thanks Patrick. I think probably about 2 hours.
awesome job!!!!.. but I think the table was a big problem, next time try using a saw horse, mount you brackets to the saw horse, then the tank to the bracket on the saw horse, what way the table top is not stopping you from folding the wrap down, and around the tank.
I think your're right. I really needed a bit more clearance from the table to really get good access to the lower edges. We live and we learn!
@@AndyManCam I love you channel, and I'm sure you've heard this before especially from us Yanks you have an awesome voice and that makes your videos even that more enjoyable
@@SoloBlack313 Thank you very much! A face for radio eh?! 😜
Admire your patience with jobs like this! Looks good too!
I wondered, what’s the screen you have? Is it specific for your Honda?
Thanks Haydn! Patience gained through years of simply learning to hide my burning rage! 🤣 The screen is from SW-Motech. They sadly stopped selling it for the CB, but it’s available for many other bikes.
Andy I think there's a lot of married fathers out there that agree with your sentiments... Can't do anything at all about the stretch marks, just going to have to see how long they can take it and what to do about it! 😏
Hahaha! Say no more! ;D
Looks pretty good to me.
Cheers Tim. It'll certainly do for now!
Keep it up!! Looks great, quick shifter time!! Haha only Honda mod worth the $$
Thanks John! I'm still not decided as to whether or not I want to put the quick shifter on. In any case, it wouldn't be the 800€ Honda unit! That's too many $$'s for my tastes! :D
Looks a great job in fairness. The difference removing the honda badge made was unreal, looked so much better without it.. You have the patience of a saint , i'd have ended up in the pub swallowing truckloads of Guinness...LOL
Cheers Mick! I totally agree with the badges. Even if I hadn't wrapped it, the badges needed to go anyway! A poor effort on Hondas part there! The guniess option doesn't sound too bad either though! ;D
Where do you get the wrap and what size, please and thank you
I think Im just going to paint mine after watching that.... I would have dropped a match in it if it were mine.... 3rd degree burns worth it!!!
Haha! There were moments when i felt the same! It’s not for everyone, but at least it’s relatively cheap and reversible!
looks amazing🤩
Seriously impressed with your patience. My concern is whether it will be worth it. I have my top box lid wrapped and it's not as hardy as I'd like. Fingers crossed for yours 🤞
Thanks Scotty. TBH, if it protects the tank from a few stonechips and scuffs, at it's own expense, then it will definitely be worth it. I'll probably feel like a change of colour/texture/design before the vinyl is toast anyway! :D
i would faff this wrapping beond any good, good job
Trust me mate, I was close at several points! :D
no kidding hats off to you Andy definitely not something would try lol
Thanks Leo! I just decided that i had nothing to lose to give it a crack!
You're one hell of a HERO. Great job. Some professionals wouldn't attempt that in 1 piece. Question, u mentioned a tour coming up? It's not the Alps tour that you just uploaded is it?
Cheers Dave. It’s one and the same Tour mate! Plenty more to come!
@@AndyManCam was wondering how you'd manage another. No worries I'll definitely be watching it again soon anyway ☺
I would love to do another before the winter comes, but it’s not looking overly likely! Still 3 days of the Austria trip for me to put together though. 👍🏻
@@AndyManCam Fab stuff. Tks for taking time to reply. Appreciate it ☺
Fairly sexy that my friend!
you should be congratulated for even attempting that in one piece m8....Bravo AMC!!
Wheels next?
Cheers bruvv! He who dares! The wheels would be definite tantrum fodder!!
Vinyl wrap wheels !!! 🦆 that! It’s bad enough trying to get the pinstripes tape on neatly.
@@tdmtam haha! So true! I need something with less angles, not more! 😂
Kudos dude
I'd have been inventing new swear words by the end of that
Well done mate
Haha! Believe me, I’m my head it was a non stop bleep reel! 🤣
Good effort Andy, looks good to me. The R&G pads looked a bit rubbish though.
Cheers john. I agree they don’t look the best. But i really missed the effect they give with gripping the tank while braking.
The question I always have on these wrapping / mod videos is.. why? Why does he have a travel hair dryer?
The question you always have is ‚why does he have a travel hairdryer?‘ seems a bit specific 😜 In any case, the answer is because a travel hair dryer is what i have. The overall why question is explained in the intro to the video. To protect the tank while simultaneously giving it a brushed metal look.
@@AndyManCam hah sorry, the joke is a little less accurate atm but the last few videos I watched you in you were incredibly hairless - just struck me as funny that you have a travel hair-dryer :)
@@tenkasen Haha! Very good point! Naturally I had to swipe it from the Mrs when she wasn’t looking! The travel variety was easier to stash in the pocket!
I know that you have already wrapped the tank, but I'm assuming that the marks you talk about are rub marks on the fuel tank sides, hence why you put the R and G stuff on, but you can machine polish the marks out, as its only on the clear coat, much easier to look after than wrapping the tank like this....but each to their own.....👍👍
Yeah I think they are just in the clearcoat. This was more of an attempt to stop them getting any worse TBH. That it's happened after just 1 year of ownership despite me being pretty careful about zips and seams on the paintwork worried me a lot!
@@AndyManCam all metallic paints are the same Andy, they are water based these days, I'm a motorcycle detailer and I deal with this sort of thing on a daily basis...
I can imagine. Have you seen much paint coming off the engines of Hondas?
Nice job 👌🏾
Thank you! 😊
Ideally you should’ve pre stretched the vinyl and covered the top, then as you heat the sides it shrinks back and takes away a lot of that excess you were left with. You need to hit it afterwards to about 85-90 degrees to kill the memory so a heat gun and thermometer is essential. Good effort though
Your getting abit of a dab hand at this wrapping business Andy, one day might do me fazer 600 , quite like this colour , hopefully you might have left a link to were you got it ,,m cheers shane uk 🇬🇧
Cheers Shane. It could have gone a lot worse! Give it a crack mate. It’s a low risk endeavor that might surprise you!
Nicely done Andy, far more patience doing that than I'd have had... would def have gotten launched out a window if I'd been having a go! :D
Be interesting to see how you get on with attempt no2 when you get the chance :-)
Cheers mate. It was borderline for a while there! I always find this process incredibly nerve wracking! But turned out ok. We’ll have to wait and see what happens with round 2!!
Looks good that mate.
Thanks very much mate! I'm happy for now!
I wrapped a Christmas present once, never again.
LMAO 🤣 😂 🤣
That's a whole different challenge! Too much tape makes it look overdone, not enough and it looks like yesterdays fish and chips!
"Badges? We ain't got no badges. We don't need no badges. I don't have to show you any Honda badges."
Hell no! And the badges may well be less seen than the missing treasure!