Great Video When U Put Your Gasket On , Lightly Smear Some Grease On Either Side Of The Gasket This Makes It Easier To Remove If You Need Too Remove It Again It Also Helps Keep The Gasket In Place When Installing The Gasket
@ in your area what does a 660 in that condition go for? When I say “price” I mean the ones that actually SELL because some people ask a lot of money but they don’t really sell…
@@ApacheGarageWhat it is bro, is the clutch arm there has a little mark and so does the case. They're suppose to align with each other while you hold tension against the clutch arm spring there. People set the marks aligned while it's sitting slacked and that's why they don't work. Pull the arm off and put it on the splines that the marks line up while you're holding tension on the spring. If my explanation isn't clear enough, check out the cuervo racing video on the raptor 700 clutch arm. It's exactly the same. Easy fix. Great video bro
Make sure u put that thing that depresses the clutch in correctly did that on my kx and was had no clue what was wrong just the lever thing was backwards
my guy gets all the good deals :) i mean its good deals if you know how to fix it... i love it okay they are in a rough shape but for 1200$ a quad its not bad. i have been offered them raptor 660 with broken head or vavles a couple of times for 1000€ or 1200€ but i just couldnt to much problems after seeing the pictures... knowing my self i wouldnt fix it... they sell around for 2000€ in running condition here around my in france. cause they not road legal so the price is halved. these look overal alright need a good clean. the red white colors in nice.
yeah for sure..he always seems to find them for so cheap or free!!watch his past vids.always the same thing!!makes you wonder!!hmmmm.thinking scam to get likes and subs from click bait titles!!!
I have questions I’m sorry to ask, but my atv has something wrong with it. The carburetor backfires a when throttle is put and poor throttle response and dies when I put a lot of throttle. Any ideas?
First, make sure you're valves are set to the correct spec. After that it sounds like it's running lean. Could be a dirty carburetor, lean jetting, or an air leak somewhere
@@shanewilliams8768 That’s what I was doing when installing it and I also seen this video. On some adjustments of that arm the clutch gets really stiff to pull
I LOVE THE WAY APACHE WORKS ON HIS STEEL HORSES!
Great Video
When U Put Your Gasket On , Lightly Smear Some Grease On Either Side Of The Gasket
This Makes It Easier To Remove If You Need Too Remove It Again
It Also Helps Keep The Gasket In Place When Installing The Gasket
@@jonlambshead5115 thank you for the tip I will keep that in mind
LOVING YOUR SHOW APACHE WE ARE BLACKFOOT AND ONLY COMANCHE WERE STRONGER!
Always wash a machine after you work on it and if it stops leaking its 100% fixed💪
@@Summit2200 Yes I agree
THE COMANCHE WE'RE THE BEST AT HORSEBACK RIDING WARRIORS!
I AM A WHITE BOY AND I REALLY THINK THAT APACHE IS GETTING SWEET DEALS FROM GERONIMO!
GREAT VIDEO 👍
@@Cloroxbleach-mp7hv Thank you!!
Great work!
@@AJR.18 Thank you!!
I’ve never saw clutch steels that black before 😯😳
@@72mmALKYDRAGGIN same here
@ in your area what does a 660 in that condition go for? When I say “price” I mean the ones that actually SELL because some people ask a lot of money but they don’t really sell…
@@ApacheGarage still got both of them?
i love your video
@@AllenWilliams-e8r Thank you!!
THE APACHES HAD GERONIMO AND GERONIMO WAS THE STRONGEST LEADER!
The clutch can’t be getting depressed if it’s that easy it can’t be actuating the clutch springs
@@hacobdhhd1279 Thank you I will check it out
@@ApacheGarageWhat it is bro, is the clutch arm there has a little mark and so does the case. They're suppose to align with each other while you hold tension against the clutch arm spring there. People set the marks aligned while it's sitting slacked and that's why they don't work. Pull the arm off and put it on the splines that the marks line up while you're holding tension on the spring. If my explanation isn't clear enough, check out the cuervo racing video on the raptor 700 clutch arm. It's exactly the same. Easy fix. Great video bro
0:04 They stopped making Raptor 660s in 2005.
@@ReFlexPoison197 I don’t know why I said they are 06 they are actually 2005 it just slipped out
i have a raptor 660 u need to adjust that gear that holds the clutch cable
@@noahthornton2934 I did ant it’s not fixing it
@ try adjusting the cable mine did the same thing and i adjusted the cable and it fixed it
Great video just invest in some good tools make your job much easier
@@stephengalvan7722 What tools do you recommend I need?
Make sure u put that thing that depresses the clutch in correctly did that on my kx and was had no clue what was wrong just the lever thing was backwards
@@hacobdhhd1279 I will triple check it again
@@ApacheGarage love the videos man keep posting! U look like a pro no lie
my guy gets all the good deals :) i mean its good deals if you know how to fix it...
i love it
okay they are in a rough shape
but for 1200$ a quad its not bad. i have been offered them raptor 660 with broken head or vavles a couple of times for 1000€ or 1200€ but i just couldnt to much problems after seeing the pictures... knowing my self i wouldnt fix it... they sell around for 2000€ in running condition here around my in france. cause they not road legal so the price is halved.
these look overal alright need a good clean. the red white colors in nice.
where are you located and finding these sweet ATV s Mexico or southern states ?
yeah for sure..he always seems to find them for so cheap or free!!watch his past vids.always the same thing!!makes you wonder!!hmmmm.thinking scam to get likes and subs from click bait titles!!!
clutch cable issues after clutch install on raptor 700 HOW TO FIX IT.
On the cuervoATV channel. The raptor 660 setup is exactly the same
14th👍
Just all comment love bruh
Frm CHI
@@72mmALKYDRAGGIN Thank you!
I have questions I’m sorry to ask, but my atv has something wrong with it. The carburetor backfires a when throttle is put and poor throttle response and dies when I put a lot of throttle. Any ideas?
First, make sure you're valves are set to the correct spec. After that it sounds like it's running lean. Could be a dirty carburetor, lean jetting, or an air leak somewhere
It was leaking from a stuck float
@@stephengalvan7722 yes it was
This is your problem bro. Easy fix
th-cam.com/video/vlmWXZnYoG0/w-d-xo.htmlsi=LEldZzrZ59dESsjl
@@shanewilliams8768 I can’t click on the link. What is the title of the video so I can look it up
@ApacheGarage clutch cable issues after clutch install on raptor 700 HOW TO FIX IT.
On the cuervoATV channel
@@shanewilliams8768 That’s what I was doing when installing it and I also seen this video. On some adjustments of that arm the clutch gets really stiff to pull
@@ApacheGarage they do feel super stiff on the arm itself, but it'll feel normal with the added leverage that the clutch lever gives you
@ that’s what I meant to say. When I pull the clutch with the clutch perch it’s really stiff
IF YOU DON'T HAVE THE LITTLE BALL BEARING THE CLUTCH WILL ACT EXACTLY THE WAY IT'S ACTING NOW!
@@keithcrampton1438 Yes I did have it