Audi A6 4F Allroad Quattro HEADLINER removal Full proces

แชร์
ฝัง
  • เผยแพร่เมื่อ 28 ธ.ค. 2024

ความคิดเห็น • 23

  • @marcin6052
    @marcin6052 ปีที่แล้ว

    Very helpful video, i got one important question though. How did you remove the screw that holds the panel on 4:30 ? Do I have to remove the whole side panel of the trunk for it?

    • @VDEdition1
      @VDEdition1  ปีที่แล้ว

      Thank you. At this part of the video 4:30, I didn't remove the c pillars, I just loosened them so I could remove the headliner. Afterwards, with the help of an L Torx key, I unscrewed the screws and took them off completely, but unfortunately I didn't record it. Not all panels have to be removed. Just make room so you can approach with the L key and unscrew the screws.

    • @sarunasrimkys2496
      @sarunasrimkys2496 10 หลายเดือนก่อน

      How do you put it back in without braking anything

  • @sezginkanik8761
    @sezginkanik8761 หลายเดือนก่อน

    What kind and brand glue or epoxy should l use to stick it on ??? Can someone give me name of the product? I saw on a video that they use paint roller to put the glue or epoxy on it

    • @VDEdition1
      @VDEdition1  หลายเดือนก่อน

      It is important that you use heat-resistant glue. In particular, I used Dunlop LP.

  • @marcstreiff6067
    @marcstreiff6067 6 หลายเดือนก่อน

    Thank You, currently removing the headliner & pillar trim on my 2005 allroad which is a challenge..

    • @VDEdition1
      @VDEdition1  6 หลายเดือนก่อน

      You're welcome.
      Good luck with the works.

  • @max-kj6jo
    @max-kj6jo ปีที่แล้ว

    Hello, Amazing job, What paint had you use? And do you paint the roof?

    • @VDEdition1
      @VDEdition1  ปีที่แล้ว +1

      Thx. The roof and pillars are upholstered with the original canvas for the headliner with a 3mm sponge. Other plastic parts are painted with car varnish. First clean them well, then apply plastic primer and only then paint.

    • @tiptopenterijerbrcko2626
      @tiptopenterijerbrcko2626 ปีที่แล้ว

      Odličan posao.

  • @vladmarincus4771
    @vladmarincus4771 2 หลายเดือนก่อน

    U cut the part when u remove the back pillars...

    • @VDEdition1
      @VDEdition1  2 หลายเดือนก่อน

      I didn't cut, I just forgot to take a video because they were left in the vehicle after I removed the headliner and I just forgot to take a video. The first time the 4f comes into the shop, I'll film the C pillars being removed.

    • @vladmarincus4771
      @vladmarincus4771 2 หลายเดือนก่อน

      @@VDEdition1 i just found out youu dont need to remove the C pillars..just force the headliner out. Also the front pillars...you just pull the headliner back

    • @VDEdition1
      @VDEdition1  2 หลายเดือนก่อน

      I don't take them off either if I just need to remove the headliner, but in this case I had to take them all off because I had to reupholster them in black :)

  • @hampusbohlin7591
    @hampusbohlin7591 ปีที่แล้ว

    Hi! Amazing work. Have you any experience in the salon version if there is anything diffrent about it? Im thinking about doing the same to mine and your video is the only one regarding the c6! Thanks again.

    • @VDEdition1
      @VDEdition1  ปีที่แล้ว +1

      The procedure is the same, only it is a little more difficult to remove the headliner for a salon version. You have to fold down the seats and remove the headliner through the passenger door. Thank you and good luck with the works.

    • @Henry-nr3sf
      @Henry-nr3sf ปีที่แล้ว

      @@VDEdition1Hi, would this process be the same for the A7 4G?

  • @still26
    @still26 9 วันที่ผ่านมา

    Thanks!!!!

    • @VDEdition1
      @VDEdition1  7 วันที่ผ่านมา

      Thank you for your comment.

  • @booger__
    @booger__ ปีที่แล้ว

    thank you for sharing this 🙏

    • @VDEdition1
      @VDEdition1  ปีที่แล้ว

      You're welcome. I'm glad the video was helpful.

  • @yolooo3900
    @yolooo3900 ปีที่แล้ว

    Good joob