Auto Painting Made Easy - Step-by-Step Guide to Prepping and Painting Your Car at Home!
ฝัง
- เผยแพร่เมื่อ 4 พ.ค. 2024
- Ready to develop a new skill, and Learn how to repair and paint your car at home? Join us in this comprehensive tutorial where we'll guide you through the entire process of repairing your fender, prepping it like a pro, and painting it to perfection-all in the comfort of your own garage! Whether you're a seasoned enthusiast or a novice looking to expand your skill set, this video is packed with valuable tips and techniques to help you build your confidence and expertise in auto body and paint repair. Say goodbye to costly trips to the body shop and hello to a newfound sense of mastery over your vehicle's Is appearance.
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com/shop/garagenoise
In this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Finish1 fc710 clearcoat/ slow activator
amzn.to/3wiX5f7
upol#4 adhision Promoter
amzn.to/44sUTOE
Porphis PRD 715 website www.porphis-online.com/
3m cubitron2 xtract 320 grit
amzn.to/3xwRpLB
3m cubitron2 xtract 180 grit
amzn.to/3Ibjn4b
3m cubitron2 xtract 80 grit
amzn.to/3XCrGMg
upol clearcoat
amzn.to/3XhGtgj
upol 2k primer
amzn.to/3OzRRQZ
low cost disposable cup system 1.0
amzn.to/3PfhKWs
astro sun light
amzn.to/3YbFFtT
premium tack cloths
amzn.to/3FK35zw
prep solvent
amzn.to/3FCoRl7
raven latex gloves
amzn.to/3BsiGBb
3m paint mask
amzn.to/3UP7NQP
70% isopropyl alcohol
amzn.to/3uCCy0F
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com/shop/garagenoise
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/ZMeV1et9D/
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise. - ยานยนต์และพาหนะ
New subscriber here. Just wanted to say that the videos you produce make it so easy to understand and most importantly, makes me feel confident in understanding the task at hand as you provide the steps and procedures in a concise and clear manner. Thanks for your dedication! We take notice.
Welcome aboard! That's awesome to hear, got some great content coming up so be sure to turn on those notifications.
After years of blocking by hand , we found there was no difference between hand sanding or using a da with a foam interface pad w 320 Came out just as good ! Good videos
Golly… just when I wonder “What more can Chris teach us?”…you touch on details I hadn’t caught before.
Thank you!!
Hey guys. I'm a recent subscriber of your channel. I've been a mechanic for over twenty years. I've pretty much done everything on cars except paint. Your videos have been a huge help in learning how to do this stuff properly. I have a 99 Jeep Wrangler Sahara, Forest green metallic (PG8) I want to do my first full paint job on. I've picked up a lot of body tools, and guns. I picked up a Matco hvlp 1.3 for a killer deal. Haven't used it yet, so I hope it's decent. We'll see how things go. Keep up the great content. Keeping it simple is what I love most!
Awesome brother! Welcome to the channel and I appreciate the comment and support!
And this is how we all work together, and appreciate other trades that we aren't 💯 clear with!
It's not hard to paint it's all the other stuff that's difficult especially if you picky lol 😆
Thanks Chris for taking the time to educate TH-cam on the proper techniques of autobody repair.
Any time!
Information like this is priceless. Thankyou.
Awesome! Happy it was helpful!
It really is. I've seen some pretty atrocious body work in the auto repair industry. I look at some cars and think. How could I possibly do worse than this?😅
Fantastic finish with the 715, Chris! Your channel is in my top 3 favourite channels, alongside The Triggerman! Have a great day, Sir. 😎🤙👍
nice video sir,,, im almost 17 years of car painter here in Philippines am using grasurit body filler,, the body you use is soo smooth its very easy to sand,, the technic of sanding is great i like it,, thinks for this wonderful video
I build electric guitars, which is pretty darned fun, but occasionally I do car restoration projects.
Whatever I'm working on though, I really find the content on your channel extremely interesting and informative. Excellent job; thank you!
Painting a custom guitar would be cool! Appreciate the comment and support brother!
Appreciate the content very much especially how your step by step descriptive detail in your edits and voice overs. A lot has changed since my last paint job 30 years ago so I'm pretty much newb status all over again! But thank you.
I appreciate that!
Thanks 🙏 for taking the time to make this videos
Hi Chris, great video as always and I'm pleased you like the Porphis 715 as that is the same gun as I had on loan for a while and I was very happy with how it sprayed, for the money you just can't go wrong👌
As always your video was full of useful info and you took us through each step explaining what you were doing as you went along, anyway the finish you got from the 715 was superb and the clear went on nice an flat, thanks for sharing👏🙏👍John UK
I may become a distributor of these guns I like them so much.
That's a great idea Chris, it would be good if we had one here in the UK as ordering from the USA can become expensive.
40+ years ago, early in my electrical apprenticeship, I decided to take some welding classes. After two terms I learned one thing…to always hire my welding done. At this stage of my life I have way more time than money so decided to “to fix” the damaged clear coat on our old desert car. You make this stuff look easy, but I’m having (bad) memories of those welding classes. :-)))
You can do it! Take your time follow the process, I'm here if you have questions.
I’m gonna do it but time will tell if I ever wanna do it again! :-))) I guess the important thing is to just try. And, the old paint job was a mess before I started, so what’s to lose? I’ll let you know cuz I’m very close to paint. Thanks for your vids!
Reffering to your question about working on a project - not really a project car, someone bumped into my rear quarter panel when my car was i the parking lot and I decided to fix it myself - that's why I started watching you :D
Awesome! That's what it's all about.
This is a great video!... you have detailed it so well!... I've always wondered how to lay on base coat.. you seem to like to lay it on fairly wet.. this painting thing is not child's play.. it really takes a lot of talent and it seems you're pretty good at it 👍.. it's a real art and as nasty as it can be sometimes it is the ultimate reward... always keep learnin'.. good job! 😀
This was awesome 👍👍
Glad you enjoyed it
Why and when do you partial trigger? Great videos!
Great video, im hearing nothing but good things about these guns, that clear coat looked great, nice work 👍
Thank's brother!
sub'd - I'm getting ready to do some first time bodywork on a 55 chevy truck. Great content!
Your a great teacher plain and simple and to the point What’s your they of painting top to bottom
I don't really have a preference. Most painters spray top to bottom tho.
Thanks so much it’s helpful for me…
Glad it helped!
Bin a subscriber for a little while. I've bin working on a 1964 Impala SS for quite a while ,your video's have been extremely helpful I'm not ready to paint yet ,looking forward to outher gun reports especially the low pressure ones ,my garage is small and I would like as little overstay as I can get Thanks Agatn Jack
64 Impala ss will be a nice ride to cruise. Appreciate the comment and support!
Nice videos. I do some body work but not a pro yet😮
I never heard of that brand gun thanks for the info.
Thank you for the video. I am painting cars in Korea. The clear coat product you used and I would like to try applying a nice clear with a spray gun. My English is poor, so it may be in the video, but I'm curious about the name of the clear coat product you use, the name of the spray gun, and the nozzle size.
PORPHIS prd 715 mp cap
1.3 tip
Clear is Finish 1 fc710
amzn.to/44ugKVS
Can you do a video on your air line water separator/filter set up?
Just curious what brand of disposable cups and adapter did you use on the HF Black Widow you reviewed a while back. Keep up the great videos.
amzn.to/3yhwK1K
These are the cup. Not sure about adapter I'd have to check.
👌👌👌
👍
done sub..still learning to get my car spray diy... greetings from malaysia
Awesome!
Hey Chris.
I tried out the Finish 1 FC740 first on a couple of practice panels I have and felt it was a little thick for my liking (orange peelie).
Reduced it by 5 percent and right off the gun, I got mirror flat results, so I'd encourage you to give it a shot.
Thanks for all the great videos!
Reducing the clear you mean? I think I will and make a video about it. I've got the fc740 in my cart I want to give it a shot.
I have zero problems with it....lays down great and shines great !! I highly recommend it....they make great primers too. Great video !@@GarageNoise
Which type of sand paper would be ideal for bodywork holes or straight paper.
Do you use elastifiers in your clear coats on plastic parts? I painted my cars bumper last summer (big thanks to your channel for that, I wouldn't have had courage to DIY it by myself. It came out way better than what i was afraid of) and when I was washing it this spring I noticed that there was a small spider web crack in the clear coat. Something obviously deformed/pressed slightly into the bumper and cracked the clear over the winter.
Thank you for always making great videos what's the ratio for isopropyl alcohol mixture thanks..
I just use 70% isopropyl alcohol. Buy it frim amazon
Sorry if this has been asked before but what do you do to your guns between coats waiting for the paint etc to flash off? With this gun do you change tips between diff material your spraying?
I would like to see a complete repaint. Im prepping my last few panels and details on a 63 Riviera for silver. Ive watched all your silver paint videos but they are always blends and repairs. How do you approach a binder/sealer application when you have to do jams and all? Its a lot of area to keep wet for the base to settle in to. Thanks for all the material references and good content!
I've got some planned for the channel. My shop truck . It may be a bit tho
Hi Chris, Wow that repair came out beautiful! You mentioned you set the pressure to 20psi for the sealer but you did not say what you sprayed the base or clear at except you mentioned you bumped up the pressure for the clear. Do you remember you settings? I assume that is a 1.3 tip. Thanks Danno
Hi Chris, I went back and review your previous video on the porphis 715. Basecoat-22psi, 3TO from closed. Clearcoat-25psi, 3TO from closed and you used a 1.3 tip. Last question. What adapter did you use on the 715 for the paint cups? Thanks again! Love your videos Buddy!!
How long should it take to sand down a scratch. Blend paint and clear coat? Can it be done in a day or so you need several days?
Your the first painter mention what product to actually use when wiping down your panels, but I'm wondering why only 70% isopropyl instead of 91% for a lower moisture content??
Because of the lower flash point.
Hey there, great video. What regulator are you using with the Porphis? I just purchased the 717.
I'm using a sagola regulator.
@@GarageNoise thank you so much
What color primer/sealer would you recommend for a first time DIY white paint job? (white / grey ?)
I would start with grey. Upol can be tinted up to 10% with basecoat.
Any tips for painting a c4 corvette? There is only one area on the hood that needs some repair. But I’m not sure how to go about it. There is a 1” section that has delaminated.
You need to paint the whole hood. Repair the delamination primer the area then blend the color in that area and clear the hood.
How much it will be to do the same paint job ?
What’s the gun set up ??
I got a new induction hood and was told to sand off the e coat primer and reprime because it would peel, so I did. Do you think I should guide coat the new primer I put on?
You should guide coat it to make sure you get the texture out.
Hey, I have been searching everywhere for a simple step-by-step guide from the start of painting an old 1994 Ford f150. For a beginner like me, the first thing I need is steps. I have small details figured out, but the order minus small information for now. Do I sand all the paint to bare metal first? Then fix every dent and fill with bondo? than sand the body (with the correct grit) of course?, Than primer? Then what, sand more? Or do base paint? Then sand again, etc. If someone can give me the simplest list of step by step without all the details, I would appreciate it so much. Just a simple 1-10 order list. Thank you
I'll give you my list. I need to make a video on this. First bodywork, the reason for this is if you sand the car first you my not be able to identify all the dents. Second sand car, and strip paint as needed. Then primer block sand prep and paint
@GarageNoise Thank you sooo much tha6s exactly what I needed. I am subscribed and looking forward to watching your videos.
How is that gun?
I have seen nothing but great things about that prd 715
I lke it so much, Im looking into becoming a distributor of this gun.
@@GarageNoise I think I'm going to order the 717 but order the 715 cap and needle set so I should be able to spray about anything
We start painting before porphis existing and we survived
Of course!
Hey man I've been doing auto body repair and paint for 30years but these aluminum body Ford's are kicking my butt what tricks can you show us on repairing creases in doors and beds I feel stupid asking but if you have any repair videos on some of those I'd appreciate seeing them
I wish I had a secret I could share, I use plenty of heat, and believe it or not, glue pulling is the best way. Deep creases that's tough, If it's too large and deep, I'll just write it to replace .Definitely get double the time of steel if you're repairing. If I get the right job, I'll do a video.
@@GarageNoise thanks I do the heat glue puller but our insurance adjuster doesn't understand it's not steel, thanks any help will be appreciated I really like your channel you're the real deal!
@@SamKeeton thanks brother!
How long do you wait between clear coat application?
About 10 minutes
Could you suggest some reputable brands for materials like paint and fillers? Do you happen to have a list categorizing them into good, better, and best options? I'm in the lookin to buy some and want to ensure I get the best value for my money.
I always look for the best value for the money. There's alot of good options. I use nason xl basecoat, finish1 fc710 clear and upol lightweight gold bodyfiller.
@@GarageNoise awesome thank u
@@GarageNoise what about primer and sealer
@@ericdoe4746 I use upol 2k primer it can also be used as a sealer. You should sub brother. I'm always discussing alot of products on the channel.
@GarageNoise much appreciated. but I am subscribed, and now that u say that u use the upol as primer and sealer, i remember u talking about in a video. Just cant remember which one it was
Im a beginner and i want to know what is better method waiting until base coat fully cures than spray clear coat or spray it after base coat dry to the touch ?
In tds they always said that you can spray after 30 min
I apply clear 15 min after base.
@@GarageNoisethanks for your help ❤️ i can't spray clear coat on fully cured base coat or i need to scuff the base coat ??
@@bessem4164 follow the Technical data sheet for your paint some paints have a 12-24 hr window for topcoat some have a shorter window. Personal 2-3 hour is the longest I'll wait.
Hi! What kind of air compressor did you use for painting. Tank size and cfm?
Mine is an ingersoll rand I think it's a 60 gallon makes about 16cfm. Puchased it at tractor supply for about $1200 I haven't had any issues with it
@@GarageNoise Porphis gun can do a full respray with this compressor without air dropping?
@@Killer-lo3ig oh yeah, absolutely. It consumes 10.5 cfm so it not a lvlp but also not an air hog.
What percentage of Isopropyl alcohol do you use for your wash?
70%
@@GarageNoise You're not worried about the water content in the alcohol being trapped under your paint and primers?
@@stallionranchwoodworks not at all the alcohol helps it evaporate quickly. Faster than prep solvent
whats the price on it?
It's around $240
Don't know if I should get a porphis 717 or porphis 715
I don't know enough about the 717. I know it may have the split tip and I sprayed withth the 629 with the split tip and I like the 715 better. Honestly I think you can a gun that sprays better or is easier to use than this 715.
The 717 works well on lower pressures than the 715, uses less material and is slower as you would expect from a split tip. Both impressive finishes. I have the VS 1.3 and 1.4 and the MP 1.3. I just ordered the MP 1.4. Other than the tip nozzle air cap sets the 717 and 715 seem to be the same gun. Don’t know about longevity yet but as far as effortless finish and ease of use goes let’s put it this way, I have found myself reaching for them over my high end guns.
🥰🥰👌👌👌🇧🇩
👍
no sealer. ive gotten in the habit of using epoxy primer as a sealer and sealing with epoxy
That can be great it certain situations . I've started doingvsome of thatvas well. I did use sealer on this.
@@GarageNoise using epoxy mixed to sealer lays great and seals better than urethane
I prefer to paint over 80 grit. That ensures the paint will adhehere to the substrate. If it is single stage metallic. 40 grit is the ticket.
Oh my, I hope your kidding.
@@GarageNoise maybe 🤣
😂😂
please and please Persian subtitles enable🙏🙏👍👍❤
Once again simple stupid instructions a 6 year old can understand. Great job! The only thing I do not understand is the sealant process? In S.A we normally would use spray filler or the new version which is called ms primer. I got to go google paint sealant in S.A.....
Bloody adverts 🤬
Hey Chris i have a couple questions about a project im working on, is there a email or way i can contact you to go over them? Thanks
please and please Persian subtitles enable🙏🙏👍👍❤