Trying to hack the design a smidge: I want my drawer to be quite a bit deeper (and it's okay if it doesn't fully extend). Looking at the specs, it looks like I can just skip the mounting brackets (which would stop the drawer from being longer) and instead use several screws on the side pieces to hold the slide in place?
Great video. I do have a question that is very unclear to me on the Richelieu instructions. What thickness drawer box members do you like to use and how much clearance from the drawer box to the face frame opening. I’ve always used 1/2” thick boxes and provided 1/2” clearance. I’m assuming I need to change my construction method. I’ve just bought these slides for the first time and making the drawers this week. Thanks for any feedback in advance! Bryan
Thank you for making this video! Making the installation so much easier.
You’re welcome!
Nicely done. Can you demo the adjustment of the draw slides? The adjustment at the back where you drilled the hole, and the front please
Absolutely, next time I’m mounting drawers I’ll do a video of that. Thank you for the recommendation!
Hey! I just released the adjustment video a couple days ago. It should be the last video I posted. Hope that helps!
@@DullenWoodworking you don't happen to have a link?
th-cam.com/video/Z5CO9cXwbrE/w-d-xo.htmlsi=3iI1D197UczMAuxz
Trying to hack the design a smidge: I want my drawer to be quite a bit deeper (and it's okay if it doesn't fully extend). Looking at the specs, it looks like I can just skip the mounting brackets (which would stop the drawer from being longer) and instead use several screws on the side pieces to hold the slide in place?
Yeah you don’t need the mounting brackets as long the inside of the face frame and inside of the cabinet is all flush.
@@DullenWoodworking Thanks for replying to a 2 year old video! I didn't expect that :)
You’re welcome!! Thanks for watching!
Great video. I do have a question that is very unclear to me on the Richelieu instructions. What thickness drawer box members do you like to use and how much clearance from the drawer box to the face frame opening. I’ve always used 1/2” thick boxes and provided 1/2” clearance. I’m assuming I need to change my construction method. I’ve just bought these slides for the first time and making the drawers this week.
Thanks for any feedback in advance!
Bryan
Thank you! So this drawer material is 5/8” thick and in total measure the width of your drawer opening and deduct 3/8” total. (It’s 3/16” each side)
Good video, Thanks
You’re welcome! Thanks for watching!