Drawer Slide Installation Tips: Avoid these mistakes!
ฝัง
- เผยแพร่เมื่อ 20 ก.ค. 2024
- I have some drawer slide installation tips for you: I’ve installed some drawer slides over the years but recently made some mistakes that made me learn a few things which I share with you.
#drawerslides #drawers #cabinetmaking
* * * * * * * * * * *
My tools ##
••• FOR US VIEWERS •••
holzhandwerk-ak.de/tools/
••• FOR EVERYBODY ELSE •••
Overview
kit.co/holzhandwerk_ak/my-woo... *
Power tools
kit.co/holzhandwerk_ak/my-pow... *
Hand tools
kit.co/holzhandwerk_ak/hand-t... *
Camera gear
kit.co/holzhandwerk_ak/camera... *
*) affiliate links
When you buy using an affiliate link you pay the same price as usual - it won’t cost you more! I will get a small percentage of the price from amazon. Thanks for considering this way of supporting me!
* * * * * * * * * * *
Support my work ##
My amazon wish list (if you feel like making me smile 😉)
ak-u.de/wishlist
* * * * * * * * * * *
Partners and “Advertisement” label ##
I explain the details in this video: • MY PARTNER COMPANIES -...
I want to let you know that I cooperate with a couple of tool companies. Occasionally, they provide me with some of their tools for me to use in the shop.
But: Whenever you see me using a tool it means that I like it and think it’s worth using. When I do a review, I tell you my honest opinion.
I want to be transparent about these partnerships, however, so that you’re not kept in the dark and can make up your own mind if you think I’m in fact unbiased or not.
My partner companies are: Bessey, Kreg, Maschinenhandel Meyer, Triton, Bosch Professional, PNZ Produkte, kwb (as of 09/2022)
* * * * * * * * * * *
What is this channel about? ##
Watch inspiring videos - Learn along with me - Make something!
I love to create things out of wood and to make inspiring, enjoyable videos about the process. I really enjoy learning new skills and I share what I learnt at the end of each video.
Subscribe! ##
I really appreciate your interest. Please consider subscribing - it means a lot and motivates me to keep making videos:
ak-u.de/subscribe
* * * * * * * * * * *
You can also find me here:
Instagram: / holzhandwerk_ak
Blog: holzhandwerk.andreas-kalt.de (German) - แนวปฏิบัติและการใช้ชีวิต
![ลักพาตัว เอาลูกเอิร์นกลับมา...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/f4NVKlZ5qkk/mqdefault.jpg)
Respect! Willing to share mistakes to let your viewers have a 20/20 view.
The advice at the end about the spacing of 2 or 3 mm is really helpful as this is my first time I am using these types of drawer slides. Thanks
I appreciate videos featuring mistakes and their prevention and remediation!
I’m just about to start. Exellent video. I would have made all three mistakes probably. Better than watching a slick video where no problems are encountered or difficulty emphasised.
Pointing out mistakes and how they can be rectified is a big help. Thanks for the video.
Thanks. Glad you like it!
I've recently experienced the same problem, I ran the complete drawer thru the table saw and took a small slice (width of blade) off the drawer, set blade high enough for drawer side, worked great.
Another top notch video. As always full of useful info without any padding. Looking forward to the next one. Thanks for posting!
Thanks for your kind words! Greatly appreciated!
Thank you for sharing your mistakes. We learn the most from our mistakes.
Great information. And the comments section is on point with also great information. Many thanks.
Thanks Andreas, those tips are so useful, I'm about to make some drawers for my new Workbench in a couple of weeks time.
Another great video as usual 😁
Thanks Colin. Enjoy your project!
Entlich!! Eine Deutsche Holzarbeiter! Danke für die Tipps!
I fully appreciate your candor. Wished I had read your post earlier.am a newbie and was at my wits end, trying to fit drawer.
Me too!
Thanks for the helpful advice. I just finished a project where these tips would be perfect.
Thanks for your feedback
Thanks for this video, especially for the content about this subject .
You’re welcome.
FINALLY! Someone confirmed what those bendable tabs are on the side of the drawer slides! Why isn't this info more available?
Really great advice!
having experienced this-- your video and tips are right on
and thanks for the reminder
Thanks for your feedback
Great video. Nice info. Thanks.
Thanks for your feedback!
I wish I watched this before messing mine …but thank you sir !
Lol! The exact problems this guy is talking about is exactly what is happening to me now. I wish I had watched this video earlier.
I have built hundreds! of drawers. Absolute key is all measurements in mm ! Cabinet hardware is manufactured in metric sizes. Sorry US folks. The ah ha moment for me was a large set of drawers (36" wide) that was full of heavy dishes. It just wouldn't close perfectly (soft close slides). Slide manufacturer Rep stopped by to assist and measured the opening and checked the drawer was square - yes. Then he said, "Did you measure the opening & build the drawers in mm??" Nope. "Well that's the problem. Imperial to metric doesn't translate exactly, compounded.....You can easily be off 1/16+. Just enough for a headache with heavy drawers." From that moment on, I measure the cabinet opening and build the drawers from mm measurements. Perfect every time. Yes. when in doubt, make the drawer smaller and add shim. To further help, make a quick spread sheet that allows you to change drawer opening & slide parameters and calculates the drawer sizes for you. This really helps with math errors which is easy to do with multiple drawers being constructed at one time.
Ty for this
AFter just installing about 16 drawers with glides just likes these, I totally agree with you! I wish I had watched your video before ordering the new drawer boxes because I too found that providing a cabinet that is slighter larger than just 1" than the drawer box is much better. I had to widen the vertical face frames on about 6 of my drawers by planing the vertical styles. ugh!
Thanks for your feedback.
Conversely if your drawers are too wide you can easily plane or sand them to fit.
Thanks brother for sharing this error. God bless.
Thank you for your comment
Accuracy is key! Strive for cuts that are LESS than 1/32” off. Otherwise your tolerances can stack up and nothing will be right. I just finished my 1st major wood project, a 6 drawer dresser with built in bookshelf. My drawer slides are within 1/64th inch and diagonal are within 1/16th of being square. I made the drawers 1/16th smaller than the required 1" gap and the slides work perfectly. When I installed the outer slides to the carcass I measured from the bottom rather than from the previous slide, that takes away stacking tolerances. Everything fits perfectly! Only errors were in a few places the birch top veneer has peeled during the cutting operations.
That’s unacceptable. The ones that I build are within a 1/1000th.
@@2fastg35 You're no doubt a pro and have been doing this for awhile. I'm a hobbyist and this was my 1st go at anything like this. When I grow up I wanna be like you!
@@GrantOakes I don’t blame you. Everyone should strive for greatness. I am Alexander the Great.
More likely, you’re a boastful big-mouth.
Thanks!
You’re welcome. Glad you like it.
yes i made the same mistake and it was my 1st installation .........a replacement
Great video
Thanks
EXCELLENT explanation! Thank you. I just have a quick question that will show how little experience I have with this. I need to replace the slides in my oak desk. The glide instructions say that you need to make sure the glides are level. I live in an old house, so the whole desk itself is not level. If I don't level the desk first, will everything else be messed up?
I would say this: make sure the slides are at a correct 90 degree angle to the face of the desk. Even more important: make sure that the slides on both sides of the drawer are at exactly the same height. This will make your drawer run smoothly. Then test them, if the desk is only half-decently level, it will be fine. The friction in the slides will make sure that the slide doesn’t run by itself. If it actually does come out or run closed by itself, use shims to adjust the desk to being (more) level.
Great video! I’ve already made all these mistakes. Especially making the drawers slightly too wide. I fixed it by running my track saw along the sides of the drawer to create the space there. Wasn’t pretty either but didn’t have to chisel the cabinet frame. Only works if you glued the drawer box of course. If there is already metal fasteners then that won’t work.
Thanks for your comment - that’s something I hadn‘t thought of. Would probably have been easier in my case, too. Well … I’ll keep it in mind - but hopefully won’t have to use it 😉
I’ve done the same 😬 just ran the drawer through a dado stack a few times to let the slide fit.
Thanks for your tips..
Want to know if it's required to use specific scre holes on the slides? I've been struggling with my installation, drawers don't fully close have to push for a full close
Usually, the screws come with the slides. But they are not special - regular small wood screws will do.
Having to push towards the end can have several reasons: 1. your cabinet might be narrower at the back than at the front (like mine as explained in the video). 2. your drawer or your cabinet might not be exactly square so that there is more friction going in, 3. (least likely) you’ve used screws with too big heads in the back part of the drawer slide so that the slide scratches the screw heads there.
@@holzhandwerk_ak thanks
Hallo ihr englisch ist wirklich sehr gut danke für ihre Tipps :D
Danke und gerne.
👍
Hello Sir
I struggle to make the drawer perfectly square..
The 1 or 2 degrees variance causes troubles for the drawer to slide easily
Im using plywood with dowel joins instead of screws
Once a insert the dowels, the drawer becomes slightly offsquare..
Any advise
Appreciated your video
How do you mount the drawer bottoms? Do you screw them on? If yes, you can put a clamp diagonally on the drawer (from one corner to the opposite one) and slightly press the drawer into square position. Then you screw on the bottom which will make sure that the drawer stays in the position the clamp pressed it into.
I have built my drawer 23 inches and my cabinet a hair over 24 inches but they never fit cant figire it out.
Drawer Box vs Carcass
Drawer Box Member vs Carcass Member
Carcass? Don't you mean frame? Carcass sounds very morbid
I’m not a native speaker of English and learned all my woodworking terms from watching videos by native speaking woodworkers. I’m pretty sure I’ve heard the term carcass before and so I looked it up: the term drawer carcass seems to be common in the UK, whereas drawer frame or drawer box seem to be more common in other parts of the English-speaking world.
@@holzhandwerk_ak I'm not a native English speaker either. Maybe they say "drawer carcass". Cause the word carcass on it's own is literally a diseased & rotten body. But yeah, I've never heard that term before.
Calling it a carcass is normal in woodworking. There's lot's of words that have multiple meanings. Like "Dense" can mean stupid or also hard. 👍
get to it, too many toobers talk too much