Dear friend I have seen hundreds and thousands of videos on TH-cam. Yours is the best. Nice presentation, nice geometry, and very intelligently explaining the concept. The best thing in this video is your "hand writing", exactly like mine. I love it. Besides, you seem to be very well educated in electrical engineering stuff. Thank you for this wonderful informative video. Great job! Please keep it up.
This method is the “push/ pull” arrangement, I take it. Others have used push only. I wonder how they stack up against each other in terms of cogging. Thanks for sharing. Great presentation.
In case nobody knows, sincrone electric motos dont havve starting torque. That means if you put it in a little car it wont ever move unless you give it a starting push or you have a device that changes the frequency of the tension.
Un exelente video y una exelente esplicacion ni en la universidas enseñan de una forma tan detallada , es lo que estaba buscando pero quisiera saver 2 cosas pra crear un motor de 48v y unos 1500w la primera que calibre de alambre es el mas adecuado y la segunda cuantas vueltas de alambre devo dar a cada bobina para que me quede a 48v te agradesco mucho por este maravilloso video y quedo atenta a tu respuesta un ABRASO desde colombia mil gracias por compartir .
nice video let me ask you this if am using a motor driver IBT_2 to produce magnatic flux on coils by sending pulse PWM to 18 coils and changing the direction CW to CCW , my motor drivers getting ruined because of the flux collabse what can i add to protect the motor driver ? i tried a resistor in series with a diode in parrellel with the coil connected to the motor driver but it doesnt work what else i can do ? thanks
harusnya motor yang menggunakan ACG STATER kaya beat esp dan vario lebih mudah kl dikonversi ke motor listrik tentunya setang seher dan seher keatas dilepas tinggal kasih modul 3 phase dan sedikit dirubah COIL NYA thaks mas .....
Does anyone have any links or anything to help me understand the math on it? Is it 0.35 gauge wire and if so how did you get your other numbers? Please and thank you
Grwat work , can you please do the same explanation with the same motorcycle motor , but for it how to wind it as generator, to use it as wind turbine generator . Thank you, all the best.
If I recall properly, any permanent magnet brushless DC motor can be used as a generator, as the act of spinning the magnet will generate a charge. The problem generally lies in getting the rotor to spin fast enough to generate a substantial amount of electricity, finding a substantial medium to consistently spin the rotor (wind, steam, water, heat etc) and storing/increasing the generated electricity. There are plenty of videos on youtube that show how to make water/wind powered generators/turbines. Searching "how to make of the grid _____ powered generators" should yield plenty of results.
It’s actually the stator that has the windings in this motor, the magnets spin around the outside of the stator just as in many brushless motors. The stator always stays put and the rotor always rotates, whether it’s on the inside or the outside.
There are several types, please watch all the videos below (click the link) : th-cam.com/video/ThjwZNuncfU/w-d-xo.html th-cam.com/video/jf39dqBPxYs/w-d-xo.html th-cam.com/video/-e7V4ReQouQ/w-d-xo.html th-cam.com/video/ANUi2fQcQg8/w-d-xo.html th-cam.com/video/ZDY1u_ZK6pE/w-d-xo.html th-cam.com/video/j6HNjxFPcW0/w-d-xo.html
very interesting your project. I have some questions: both, rotor and stator are from motorcycle alternator? The controller you use, needs hall sensrors? a best regards from Mendoza, Argentina
These are all from Suzuki Thunder. You can use from different motor brands, the important thing is that the number of stator poles is a multiple of three.
Sorry, when I made this video I didn't have a measuring instrument. Currently there are measuring tools for power consumption, but have not had the chance to measure them. I don't have a torque gauge.
That's the first time I am understanding bdcm. Very well explained. Thank you very much brother.
Dear friend I have seen hundreds and thousands of videos on TH-cam. Yours is the best. Nice presentation, nice geometry, and very intelligently explaining the concept. The best thing in this video is your "hand writing", exactly like mine. I love it. Besides, you seem to be very well educated in electrical engineering stuff. Thank you for this wonderful informative video. Great job! Please keep it up.
Ok, you're welcome. I love it if it's useful and easy to understand. best regards from me.
@@YudiHermanto4H how much is the approximate Torque and RPM?
@@YudiHermanto4H how much Amps (approximate) it consumed, and how much its Torque?
This must go viral!!! Unbelievable.... That's a fantastic presentation . A million appreciation.
You and your video deserve the biggest THANK YOU. You are the best teacher. Yes u are awesome
I actually understood it. That was very nicely explained. Thank you.
This has to be the best video on rewinding I have seen. Job well done.
Wow nice teaching....
Hamid Manzoor here...
Salute to you
Amazing! Very instructive video! Thanks!
Absolutely brilliant. Thankyou for the upload!!!!
This method is the “push/ pull” arrangement, I take it. Others have used push only. I wonder how they stack up against each other in terms of cogging. Thanks for sharing. Great presentation.
You are a great teacher
In case nobody knows, sincrone electric motos dont havve starting torque. That means if you put it in a little car it wont ever move unless you give it a starting push or you have a device that changes the frequency of the tension.
this is not an AC synchronous motor, it is a BLDC three phase electronically commutated motor. It can have very high starting and even holding torque.
Very good explain. Thank you ❤️
I like this channel because it is inspiring for my channel and to make an electric bike
boleh sharing via whastapp, project saya di bidang battery pack - 082146886483, that's my contact
Thanks for training 😌
The training was very good
gracias amigo muy buen video bien explicado,
You are amazing, good job
Bro long live to you, you are awesome
Ok...thanks
Great video!
Wow best video ever of brushless motor 👏
Thank you for the lesson
Un exelente video y una exelente esplicacion ni en la universidas enseñan de una forma tan detallada , es lo que estaba buscando pero quisiera saver 2 cosas pra crear un motor de 48v y unos 1500w la primera que calibre de alambre es el mas adecuado y la segunda cuantas vueltas de alambre devo dar a cada bobina para que me quede a 48v te agradesco mucho por este maravilloso video y quedo atenta a tu respuesta un ABRASO desde colombia mil gracias por compartir .
is it posible to give an additional power of motorcycle using the stator?.atleast in topspeed
I would like to ask that why must be skip they blocks? So why doesn't go in order? Thanks for answer.
nice video let me ask you this if am using a motor driver IBT_2 to produce magnatic flux on coils by sending pulse PWM to 18 coils and changing the direction CW to CCW , my motor drivers getting ruined because of the flux collabse what can i add to protect the motor driver ? i tried a resistor in series with a diode in parrellel with the coil connected to the motor driver but it doesnt work what else i can do ? thanks
Awesome 👍👍
Hi very nice video, one question, I need to make a BLDC motor with a lot of torque but at very very low speed. Can you suggest to me how to make it
i will give you about this video 5 stars 🌟 great video in the youtube.
Congrats sir, very nice 😁
Ok, you're welcome...🙏
Hey man! Congrats for your vídeos! About this motor: Were you able to measure the motor torque?
Thank you so much.
luar biasa ilmunya . sy sangat suka menonton konten ini walaupun sy tdk bisa membuatnya . terus berkarya dan berbagi ilmu
Ok, terima kasih mas broo...
Terima kasih untuk support nya....😀🙏🙏👍👍
@@YudiHermanto4H ecu / kontroler tegangan pake abang?
@@gibranalkalifi7965 pakai bekas power supply komputer yang 10A.
can the generator be used to starter a motorcycle engine?
How many Walts and amp. Battery power capacity for running?
Ty. Bro, nice tips!
very nice video
Dear, for 36 pole, how is the waring?
Buenas amigo excelente video pregunta ese sistema también sirve para generar A C
Boa Tarde,
Como posso ligar um motor da Eletrolux LTA15 de forma direta na energia ou sem o uso das placas?
Is it 18 poles or 18 slots and 12 poles?.... Great video by the way
Amazing
Good video
Mantab ,sangat bagus dan komplit ilmunya.
Great work 👍
Perfect info wonderful
Very nice
Thanks coach
Thanks for détails
Thank you for demonstration how to do a motor
Ok, you're welcome.
thank you
It's very cool.
What is the controller that u use?
good videao, but i dont connect how he calculated 10 turns, or ammount of coper lengh etc?
What is the winding gauge?
Muantul maass.. keep on sharing..
Ok mas...terima kasih sudah berkunjung...😀🙏🙏
harusnya motor yang menggunakan ACG STATER kaya beat esp dan vario lebih mudah kl dikonversi ke motor listrik tentunya setang seher dan seher keatas dilepas tinggal kasih modul 3 phase dan sedikit dirubah COIL NYA thaks mas .....
Yg jadi pertanyaan utk star dan delta besar mn torsinya, lalu perbedaan dgn atau tnp hall sensor itu apa
Kalo torsi lebih ke star om ... Maaf kalo salah
can you share to us, the module PCb , where is the place we can purchase?
Hello friend, with this winding can use as start 250 cc 4 stroke motorcycle? With 12v
Butifull!Gratulation!
is it ok to use sensorless bldc controller for ev.
thankyou
Weldon
I would like to know about 16 slot dc fan winding
I shall b grateful to you in this regard
Big thumbs for you
Ok, thank's
Perfect presenttations👏💥🏆💯
Does anyone have any links or anything to help me understand the math on it? Is it 0.35 gauge wire and if so how did you get your other numbers? Please and thank you
Greatness
Tanks a lot
Hatur nuhun ilmunya.... Nice...
Sami2 bang...😂😂
Buen trabajo
👍Спасибо 👍
👍👍👍👍👍 thank u
Thanks for the video. what's the difference with the high speed one?
Jebul wonge dewek. Halo mas bosssss...
thnk very good
Mantap mas
Can you tell me what is the watts of this motor
hi, can you make 100 000 RPM with 2ton thrust base bldc ? if you give these details i appreciate
Om, kalau seperti yang om jelaskan ini dibuat sepeda listrik gitu udah kuat ya om?, Terimakasih sebelumnya
Mantap anti skip skip iklan poko e
Terima kasih pak..😀🙏🙏
Excelllent
Bagus sekali
Grwat work , can you please do the same explanation with the same motorcycle motor , but for it how to wind it as generator, to use it as wind turbine generator . Thank you, all the best.
If I recall properly, any permanent magnet brushless DC motor can be used as a generator, as the act of spinning the magnet will generate a charge. The problem generally lies in getting the rotor to spin fast enough to generate a substantial amount of electricity, finding a substantial medium to consistently spin the rotor (wind, steam, water, heat etc) and storing/increasing the generated electricity.
There are plenty of videos on youtube that show how to make water/wind powered generators/turbines. Searching "how to make of the grid _____ powered generators" should yield plenty of results.
@@Kurokubi Thank You , i will search for that too , all the best.
Question.
Is it the same thing if i wind the stator as you wound the rotor?
It’s actually the stator that has the windings in this motor, the magnets spin around the outside of the stator just as in many brushless motors. The stator always stays put and the rotor always rotates, whether it’s on the inside or the outside.
Awesome video 👍 👍👌👌
Sudah di coba berhasil terima kasih
Ok mas bro...sama2.
How many turns have
Very Nice, thank you so much...🚀🇧🇷
Serjão tem ZAP gosto muito de motores quero colocar minha moto híbrida entende ,vamo trocar umas ideias
bro i have doubt.......how many magnets are needed to build 12 poles rotor...please answer me
There are several types, please watch all the videos below (click the link) :
th-cam.com/video/ThjwZNuncfU/w-d-xo.html
th-cam.com/video/jf39dqBPxYs/w-d-xo.html
th-cam.com/video/-e7V4ReQouQ/w-d-xo.html
th-cam.com/video/ANUi2fQcQg8/w-d-xo.html
th-cam.com/video/ZDY1u_ZK6pE/w-d-xo.html
th-cam.com/video/j6HNjxFPcW0/w-d-xo.html
ini solusi bagi saya yang mempunyai bekas vixioan lama dan baru serta beberapa punya grand dan foz1 bisa dimanfaatkan kembali.
Ok mas, semoga bermanfaat.
Top
Parabéns
What is the svg of wier
Video paling #top jelas yg pernah saya tonton
Terima kasih mas 😁🙏
Dan terima kasih sudah menonton, semoga bermanfaat.
very interesting your project. I have some questions: both, rotor and stator are from motorcycle alternator? The controller you use, needs hall sensrors? a best regards from Mendoza, Argentina
These are all from Suzuki Thunder. You can use from different motor brands, the important thing is that the number of stator poles is a multiple of three.
Luar biasa.... Ilmunya bermanfaat.... Tingkat tinggi banget 🤕🤕
Terima kasih, mas bro...semoga bermanfaat.
@@YudiHermanto4H sangat membantu yang lain semangat selalu😃
what is the consumption and the torque of this 3 phase motor?
Sorry, when I made this video I didn't have a measuring instrument. Currently there are measuring tools for power consumption, but have not had the chance to measure them. I don't have a torque gauge.
👍👍👍
Salam mas..driver nya guna yv model apa dan beli dimana mas..
Can this brushless motor power a motorcycle?
Can this brushless motor be used as a motorcycle starter?
Can't, high rpm but low torque.
@@YudiHermanto4H What should I do for torque?
Can i convert my 220v fan to 12v by putting 4 magnet at the rotor and rewinding the stator at 4 coil and drive it with mosfet??
the stator there are 16 slots? If so, you can.
@@YudiHermanto4H how many turns per coil?😊
Req min, jadiin alternator min.
Apa yg ada di ideku, mesti channel ini sudah buat dalam bentuk video.
Makasih min.
Ini jika untuk alternator sudah bisa, tinggal diputer saja.
@@YudiHermanto4H kalo jadi alternator keluaran arus jd brpa A min?
@@gamber. belum sempat ukur mas, itu kawat email setara 1.3mm, kalau tidak salah...saya lupa 😂😂