The Yakima Holdup is a hitch bike rack that has a lot of potential but falls short for carrying longer travel trail bikes. Here is my review of the rack.
I have the same Yakima model going on 5 years and have never had any issues. I've only used it for trail bikes with 26 and 27 size wheels. Left or right hand turns are not an issue. Longest trip with bikes was well over 2500km and super solid. Yes, release button is fairly close but I've never seen any marks on my forks. Not sure why anyone would drive away and leave the arm extended and not in the lock position if you weren't using the one side. I even got a great deal for my Yakima because it was a floor model so it was probably well broken in from all the customers checking it out. Well worth the money even at full price in my opinion. Rock Solid! I've got the older model that doesn't have the shiny black paint so it had rusted a tiny bit. Easily cleaned up and removed.
I recently bought the holdup 2 and did not encounter any issues as reviewed in this clip. My bikes are 29" and one has a 2.5" tyre width. Just make sure that the clamp is set right beside the fork but no need to touch the fork. Works well, is well built and looks good. Highly recommended!
I've had this rack for 3 years now with the addition of the plus2 extension and love it. Haven't had any issues with it especially the problems you mentioned with the wheel coming out of place. I'm also an extremely aggressive driver and have driven up the "twistiest" roads without a problem. The only comment of yours that is a problem is the contact between bikes. They do touch but it doesn't hurt the bikes. Ive driven from San Diego Ca to Whistler Canada with no problems. I have high end bikes (Trek slack 9.8, trek modone) so i understand not wanting any scuffs or marks but it just isn't the case. I highly recommend this rack, especially for mountain bikes
I have this rack and it has been great for my application. Placing the hook of the ratcheting arm against the stanchion brace does no damage and it moves the release button away from the fork so it wont scratch the paint, and you have easier access to it. It also makes the bike super stable. It will not rock back and forth. The threaded hitch pin takes all the slop out of the receiver so there is pretty much zero movement with the bikes going down the road. There are some other nice features with this rack that made me choose it over others at this price point. I have a Yeti SB4.5c and usually travel with a older Stumpjumper FSR or Trance
I personally recommend the 1up. I found a good deal on a used 1up. The design was well thought out and after owning this rack for a year I would buy it full price. BTW great channel. I really enjoy your videos.
My friend had the same issues you're pointing out with this bike rack. I helped him solve it by putting Velcro on the front wheel to anchor it in so the front tire does not pop out. He also put Velcro on the contact area of the fork (fuzzy side contacting the fork) to prevent the rubbing because he also has a trail bike (stumpjumper). It does suck though to have to use additional Velcro but it enabled him to keep the bike at least.
Thanks for a great review. Nowadays, it seems that negative reviews can be super helpful when making a purchase, because so much of what's out there is quality designed/made. Nice to know when there is a design to avoid.
few things tricks I do when using this rack specially with a heavy 29'er E-bike; 1. make sure the front tire hold down is set along the front hub. 2. use a velcro strap to hold your front brake to keep the bike from rolling backwards 3. pay attention to the front arm when it becomes loose, need to tighten the racket inside to keep it from swaying side to side.
I run this rack and carry two DH bikes up to the mountains all the time. Zero issues. That button doesn't touch the fork. Wheels don't come out of the tray. Just need to get it setup correctly.
Great video and review. I found a used one for what seems like a good deal, I will be picking it up this weekend, I have 2 plus size bikes that have 27.5x3.0 tires I’m wondering if I would have the same issue as far as tire rocking out of the tire holder? I do like and rather the Yakima dr tray or the evo, however those are a little out of my price range., my question is would you know if on this tray that hold the tire can be replaced in order to accommodate a plus size tire or even replace it with a fat bike tray?
I have this rack and I love it. I have 2 XC mt bikes. Yes the handlebars can interfere with the seat of the other bike. In that case I just turn the handlebars. Kuat is nice but a whole lot more expensive. This is much cheaper particularly if you wait for REI's 20% off sale.
I had one of these loaded into the shopping basket and decided to watch this video first, now I am passing up on this rack. Thanks Clint for saving me the headaches.
I purchased the Dr Tray by Yakima about a month ago & love it. I have fat, plus, & 27.5 tire bikes and it works great. I wanted to buy something that I didn't have to get an adapter for fat bikes. I also looked at the Thule T2 & Saris Superclamp EX but the local bike shop recommended the Dr Tray as that is what the workers personally used.
He looked at the Kuat but he has the bmx bike which requires an adaptor. I have the Sherpa 2.0 which has been great for the last 12 months. I liked the NV 2.0 with the work stand, however I preferred the compactness of the sherpa.
I have the holdup, works well for me, but I have only been transporting one bike, my giant anthem 27.5. Will have to try it with mountain and gravel together. No issues with touching or bouncing.
Best rack made. Kuat Racks NV 2.0 Bike Rack Hold all sizes even fat bikes. I have wide bars on my trail bikes and has to play with seat post but no contact and bikes don't budge.
I agree with a lot the comments on here this guy nearly talk me out get this rack. So I checked it out for my self and they are good really good. Ive tryed my ebike which is a 29er up front my full suspension which 26in and my misses hardtail 27.5 and there is no way any of my bike are falling off. if u put the arm on properly not like a wet noodle arm girly boy and have it hard up against the brake line bracket it wont rub ur forks or go anywhere best rack for the money
Not true. you can add up to 3 rows on a 1.25 inch rack. buy the single then add a single if you want 2. Personally, its worth every penny to install a 2" inch receiver. then you can go with the 2 inch rack and install up to 4 rows. Many of us in our group have this setup and I can say without a doubt that this rack system is very solid on long hauls with 4 bikes, no matter the bike type. They might seem pricey, but not much pricier than other high end racks and its WAAAY better than the rest. plus you will have this rack for a VERY long time, unlike the rest. we run then year round in MI. NO rust or any issues. always works, always solid. Truly a top quality product and design
Hi Clint. Given these problems, what would you recommend, and in particular in a 4 bike hitch platform rack. I've narrowed down to Saris (Superclamp EX or Freedom Superclamp), and Thule (T2 Pro XT, a little heavy, but convertible 2 or 4 bikes) brands. Talking some cheese tough, like $800.
+Dan M if you want a 4 bike rack with unlimited offset options and not spend a lot of money the one made by Performance Bike is great. I've used it for years. But you have to have a 2 inch receiver.
I have all the same gripes with my Thule T2 Classic. If I don't bring the clamp all the way to the fork crown the bike will jump lose, but then my forks have been scuffed to crap because they rub. Been a major pain to chose the lesser of two evils for something that shouldn't have made it past R&D.
I will have to look at my fork. I have had these since before Thule bought them(used to be Transport). I have always brought the foam arm up against my fork...I may have been rubbing the paint and never known! Otherwise I like these racks. The newest which I have works with a plus tire which is kind of nice. If you have a Jeep, this is the only one that dips low enough to let the tire pass over. Otherwise I wanted the Kuat.
Just curious...what brand of class 1 hitch do you have on your accord to accommodate the holdup which is specific for class 2 hitch? I also have the same car that i install the Draw-Tite 1 1/4 hitch and a yakima holdup but the hitch has the nut stop preventing my holdup from sliding all the way to line up the hole for the pin. How does the holdup look on your car with two bikes on class 1 hitch? Are they stable enough with bikes on it? With the cost of the new hitch and holdup, i am just willing to put an extra strap in the front wheel and put a piece of pipe foam from home depot to the fork to correct the issue that you mention. Thanks
+slickkos mine is a Class 2 hitch, I believe. There's nothing preventing the rack from sliding all the way through so there's no issue with aligning the holes for the bolt. It's very very stable. Stability isn't the issue for this rack. The main issue for me is the bikes contacting each other.
Excellent! You can off set each bike by over 4 inches. Better than Yakima. And up to 5 inch wide tires. Bikes do not move and nothing comes close to contacting the forks or any other part.
Just buy some small straps for the front wheel to be held in place, or put the arm right up against the fork. It works well carrying our Levo, Kenevo and two giant ebikes
You have then wrong rack for the application. I ride with a friend and our trail bikes are in his Yakima Rack. Just went from WA to McCall Idaho and back using. It worked great. I have seen a couple of racks though that work better
The biggest issue for me is that it is just plain not long enough for my bike. I have a YT Jeffsy, which is a fairly slack bike with a long-ish wheelbase. The design of this rack is not adjustable for wheelbase length, nore is it made to accommodate anything other than the shortest of wheelbase bikes (like you said, road bikes, XC and BMX only). Also, all the other issues you pointed out are valid as well. Not sure why a strap wasn't made for the front wheel to keep it from rocking back... would have been very cheap to add one to the front similar to the rear. Road bikes? sure. Mountain bikes that arent just 26ers? NO. I do NOT recommend this rack, for mountain bike purposes at least.
I started off with just 1 but shortly thereafter opted for the second add-on tray to haul around my buddy's Ibis MTB as well. I'm pretty sure that they max out at a 4-bike capacity. It is solidly built, here in the USA, and not too many manufacturers can say that anymore.
What a load of rubbish.I have been using this rack for two electric bikes, one 29inch weighing 26Kg and one 27.5 inch weighing 23Kg.I have never had any of these problems.Its a very good set up and I am very happy with it.
4:55 I agree it shouldn't even be possible for the arm to rotate all the way down but if somebody doesn't secure it properly before driving away, they are pretty stupid and it's their own fault.
*Clint* *Gibbs* said: *"* if you want a 4 bike rack with unlimited offset options and not spend a lot of money the one made by Performance Bike is [a] great [option over this one]. I've used it for years. But you have to have a 2 inch receiver. *"*
+jon zylka yes but I am about to replace it. Still a great rack. We're going to keep it For the family SUV since that has a 2 inch receiver and the two timer has an adapter.
Clint Gibbs I see. I too have the two timer and could not see replacing it. Too nice of a rack. Thats why I was curious. I was surprised to see you with a new rack. Couldn't see you replacing it.
i have this rack and I don't like it either. I figured out right away that you must press the arm against the fork to keep the wheel down. I am a HUGE fan of the RockyMounts products now. Their racks make everyone else's look like toys except for Kuat. I won't bother with anything but Kuat and RockyMounts ever again.
I've dumped two mountain bikes onto the road using this dumb bike rack. Miraculously this first one escaped without a scratch. The second time, I believe the fork bumped up against the front hook release button. I had literally just fixed my bike, and now I need a new brake handle, new handlebar, and a new rear derailer. I would never recommend this PoS rack to anybody
Like I mentioned at 4:30 I tried sliding them away as much as possible and it wasn’t enough. I’ve been using the QuickrStuff Mach 2 for about a year now and it’s the best rack I’ve ever use.
So move the arm out just a little bit further!! Duh! I drove from Dallas to Denver and back two bikes on the back.... No issues... Move the arm to where it does work! Ugh
I cannot stand Yakima. Check out etrailer.com they have a lot of brands I love. They are awesome with their engineers and customer service. Tons of videos on each product. If you call with questions you can usually get in touch with one of their engineers.
I've found many little flaws with these overpriced racks from Thule and Yakima. One major one is rust. Being near the ocean I find these expensive systems corrode way too fast. Every single one
Worried about rubbing paint off a “trail bike”. My trail bike gets used so it does not worry me. Sounds like you don’t do much riding apart for the footpath. Stay in your Honda buddy
Great review, in my opinion, this is awful, I would not use it on any bike, the plastic parts, and if they clicking mechanism will hold up is concerning, no offsed adjustment is silly, so far the best rack I have seen is 1UP USA, here is BKXC's video th-cam.com/video/YHV7LffwMZU/w-d-xo.html But I think I will get a Van so the bikes are as protected as possible.
I stated the problem with ur review but no reply. u should of tryed a little harder before trashing a product and I have no affiliation with the product if your wondering
![[TH] Esports World Cup : Point Rush Stage](http://i.ytimg.com/vi/eLU-jnYp3Zs/mqdefault.jpg)
![USAB Showcase: Australia vs USA [OFFICIAL STREAM]](http://i.ytimg.com/vi/keiEr_MOaSQ/mqdefault.jpg)
I have the same Yakima model going on 5 years and have never had any issues. I've only used it for trail bikes with 26 and 27 size wheels. Left or right hand turns are not an issue. Longest trip with bikes was well over 2500km and super solid. Yes, release button is fairly close but I've never seen any marks on my forks. Not sure why anyone would drive away and leave the arm extended and not in the lock position if you weren't using the one side. I even got a great deal for my Yakima because it was a floor model so it was probably well broken in from all the customers checking it out. Well worth the money even at full price in my opinion. Rock Solid! I've got the older model that doesn't have the shiny black paint so it had rusted a tiny bit. Easily cleaned up and removed.
Orcello D couldnt agree more with you👍
I recently bought the holdup 2 and did not encounter any issues as reviewed in this clip. My bikes are 29" and one has a 2.5" tyre width. Just make sure that the clamp is set right beside the fork but no need to touch the fork. Works well, is well built and looks good. Highly recommended!
I've had this rack for 3 years now with the addition of the plus2 extension and love it. Haven't had any issues with it especially the problems you mentioned with the wheel coming out of place. I'm also an extremely aggressive driver and have driven up the "twistiest" roads without a problem. The only comment of yours that is a problem is the contact between bikes. They do touch but it doesn't hurt the bikes. Ive driven from San Diego Ca to Whistler Canada with no problems. I have high end bikes (Trek slack 9.8, trek modone) so i understand not wanting any scuffs or marks but it just isn't the case. I highly recommend this rack, especially for mountain bikes
I have this rack and it has been great for my application. Placing the hook of the ratcheting arm against the stanchion brace does no damage and it moves the release button away from the fork so it wont scratch the paint, and you have easier access to it. It also makes the bike super stable. It will not rock back and forth. The threaded hitch pin takes all the slop out of the receiver so there is pretty much zero movement with the bikes going down the road. There are some other nice features with this rack that made me choose it over others at this price point. I have a Yeti SB4.5c and usually travel with a older Stumpjumper FSR or Trance
I personally recommend the 1up. I found a good deal on a used 1up. The design was well thought out and after owning this rack for a year I would buy it full price. BTW great channel. I really enjoy your videos.
I have had a Thule EuroRide 3 Bike Carrier for many years and love it.
My friend had the same issues you're pointing out with this bike rack. I helped him solve it by putting Velcro on the front wheel to anchor it in so the front tire does not pop out. He also put Velcro on the contact area of the fork (fuzzy side contacting the fork) to prevent the rubbing because he also has a trail bike (stumpjumper). It does suck though to have to use additional Velcro but it enabled him to keep the bike at least.
Thanks for a great review. Nowadays, it seems that negative reviews can be super helpful when making a purchase, because so much of what's out there is quality designed/made. Nice to know when there is a design to avoid.
Just bought a used one of these. Very honest review, all good points to look out for.
Thank you so much for your reviews. Very helpful!
Thanks for talking me out of it. An upgrade from one of those goal post racks that purportedly hold 4 bikes and load bars, but not the solution.
Big thanks, you saved me time and effort in buying them returning the rack...
Awesome review! Thanks!
I have the Kuat NV and love it.
few things tricks I do when using this rack specially with a heavy 29'er E-bike;
1. make sure the front tire hold down is set along the front hub.
2. use a velcro strap to hold your front brake to keep the bike from rolling backwards
3. pay attention to the front arm when it becomes loose, need to tighten the racket inside to keep it from swaying side to side.
Great review.
Thank you, I was considering this one until I watched your video! 👍
They made some good improvements on this rack
th-cam.com/video/0ynLOVhhoZQ/w-d-xo.html
I run this rack and carry two DH bikes up to the mountains all the time. Zero issues. That button doesn't touch the fork. Wheels don't come out of the tray. Just need to get it setup correctly.
Great video and review. I found a used one for what seems like a good deal, I will be picking it up this weekend, I have 2 plus size bikes that have 27.5x3.0 tires I’m wondering if I would have the same issue as far as tire rocking out of the tire holder? I do like and rather the Yakima dr tray or the evo, however those are a little out of my price range., my question is would you know if on this tray that hold the tire can be replaced in order to accommodate a plus size tire or even replace it with a fat bike tray?
I have this rack and I love it. I have 2 XC mt bikes. Yes the handlebars can interfere with the seat of the other bike. In that case I just turn the handlebars. Kuat is nice but a whole lot more expensive. This is much cheaper particularly if you wait for REI's 20% off sale.
Clint any chance you could review the Kuat NV 2.0 rack?
I had one of these loaded into the shopping basket and decided to watch this video first, now I am passing up on this rack. Thanks Clint for saving me the headaches.
Go for the Dr. Tray. It is a great rack.
Get the Thule T2 Pro XT 2-Bike Hitch rack. Designed to eliminate those issues. Great well thought out product!
+Braaap 690 how is the bike clearance and offset on that rack?
"That's a nice rack!", Clint Gibbs, Sep 21, 2017
Good points, though. Great quick review.
I purchased the Dr Tray by Yakima about a month ago & love it. I have fat, plus, & 27.5 tire bikes and it works great. I wanted to buy something that I didn't have to get an adapter for fat bikes. I also looked at the Thule T2 & Saris Superclamp EX but the local bike shop recommended the Dr Tray as that is what the workers personally used.
+Jon Bodin I really like the space between bikes on the Dr. Tray. It's better than any hitch rack I've seen.
Great Vid!
Kuat 2.0. work great for my bikes and fits great on my Mazda 6
Get the Kuat NV 2.0. Even has a built in bike maintenance stand for repairs at the trailhead.
Austin Mccoy agreed!!! Love my Kuat and I've been approached by strangers to compliment on how nice it is.
He looked at the Kuat but he has the bmx bike which requires an adaptor. I have the Sherpa 2.0 which has been great for the last 12 months. I liked the NV 2.0 with the work stand, however I preferred the compactness of the sherpa.
I 2nd this. I love my Kuat NV
I have the holdup, works well for me, but I have only been transporting one bike, my giant anthem 27.5. Will have to try it with mountain and gravel together. No issues with touching or bouncing.
+gar far it’s the bike contact issue with two bikes on the rack that was the biggest issue for me. Let me know how it works for your bikes.
Looking forward to see what you replace it with.
Good review. My HOLLYWOOD rack has none of those issues
Best rack made.
Kuat Racks NV 2.0 Bike Rack
Hold all sizes even fat bikes. I have wide bars on my trail bikes and has to play with seat post but no contact and bikes don't budge.
I agree with a lot the comments on here this guy nearly talk me out get this rack. So I checked it out for my self and they are good really good. Ive tryed my ebike which is a 29er up front my full suspension which 26in and my misses hardtail 27.5 and there is no way any of my bike are falling off. if u put the arm on properly not like a wet noodle arm girly boy and have it hard up against the brake line bracket it wont rub ur forks or go anywhere best rack for the money
My spring loaded pin works loose causing the rack to drop to the loading position. I use Gorilla tape to secure the pin from vibrating out.
can you just strap the front wheel to the tray?
1UP USA. BEST bike rack ever. ALL other bikes racks are literally waste of money
+Pete Z they don't sell one that fits a 1.25 inch receiver that carries two bikes.
Not true. you can add up to 3 rows on a 1.25 inch rack. buy the single then add a single if you want 2. Personally, its worth every penny to install a 2" inch receiver. then you can go with the 2 inch rack and install up to 4 rows. Many of us in our group have this setup and I can say without a doubt that this rack system is very solid on long hauls with 4 bikes, no matter the bike type. They might seem pricey, but not much pricier than other high end racks and its WAAAY better than the rest. plus you will have this rack for a VERY long time, unlike the rest. we run then year round in MI. NO rust or any issues. always works, always solid. Truly a top quality product and design
pretty surprised u think this is true...
Yeah 1up is awesome and you can run 3 bikes in a 1 1/4 hitch. All aluminum and made in the USA. The quality is incredible
Pete Z I
Hi Clint. Given these problems, what would you recommend, and in particular in a 4 bike hitch platform rack. I've narrowed down to Saris (Superclamp EX or Freedom Superclamp), and Thule (T2 Pro XT, a little heavy, but convertible 2 or 4 bikes) brands. Talking some cheese tough, like $800.
+Dan M if you want a 4 bike rack with unlimited offset options and not spend a lot of money the one made by Performance Bike is great. I've used it for years. But you have to have a 2 inch receiver.
Clint Gibbs Do you recommend the Performance rack over the Yakima fourtimer? Those are the two I have narrowed it down to. Thanks.
I have all the same gripes with my Thule T2 Classic. If I don't bring the clamp all the way to the fork crown the bike will jump lose, but then my forks have been scuffed to crap because they rub. Been a major pain to chose the lesser of two evils for something that shouldn't have made it past R&D.
I will have to look at my fork. I have had these since before Thule bought them(used to be Transport). I have always brought the foam arm up against my fork...I may have been rubbing the paint and never known! Otherwise I like these racks. The newest which I have works with a plus tire which is kind of nice. If you have a Jeep, this is the only one that dips low enough to let the tire pass over. Otherwise I wanted the Kuat.
1 up for sure. 100%
Just curious...what brand of class 1 hitch do you have on your accord to accommodate the holdup which is specific for class 2 hitch? I also have the same car that i install the Draw-Tite 1 1/4 hitch and a yakima holdup but the hitch has the nut stop preventing my holdup from sliding all the way to line up the hole for the pin. How does the holdup look on your car with two bikes on class 1 hitch? Are they stable enough with bikes on it? With the cost of the new hitch and holdup, i am just willing to put an extra strap in the front wheel and put a piece of pipe foam from home depot to the fork to correct the issue that you mention.
Thanks
+slickkos mine is a Class 2 hitch, I believe. There's nothing preventing the rack from sliding all the way through so there's no issue with aligning the holes for the bolt. It's very very stable. Stability isn't the issue for this rack. The main issue for me is the bikes contacting each other.
1UP makes the best bike racks made, period. Expensive, but the best.
My bike keeps falling off , what am I doing wrong ?
Would recommend
Thank you. Great review. I almost bought it. Now I won’t. Any other rack you recommend that can be turned into 4 later?
th-cam.com/video/UKGO1KUyzNg/w-d-xo.html
Need to tighten it down more and have top arm further back on the wheel so it's past centrer
I have an issue with my Two Timer that I will post on that video.
Excellent! You can off set each bike by over 4 inches. Better than Yakima. And up to 5 inch wide tires. Bikes do not move and nothing comes close to contacting the forks or any other part.
Just buy some small straps for the front wheel to be held in place, or put the arm right up against the fork. It works well carrying our Levo, Kenevo and two giant ebikes
Nice video. What car do you have?
2 door Honda Accord
You have then wrong rack for the application. I ride with a friend and our trail bikes are in his Yakima
Rack. Just went from WA to McCall Idaho and back using. It worked great. I have seen a couple of racks though that work better
At least you confirmed I’m not crazy
Buy the Kuat 2.0. Best rack on the market. You have super nice bikes. They deserve a nice rack.
You can see he doesn't ride his bikes. Everything is new. He's a wannabe.
The biggest issue for me is that it is just plain not long enough for my bike. I have a YT Jeffsy, which is a fairly slack bike with a long-ish wheelbase. The design of this rack is not adjustable for wheelbase length, nore is it made to accommodate anything other than the shortest of wheelbase bikes (like you said, road bikes, XC and BMX only). Also, all the other issues you pointed out are valid as well. Not sure why a strap wasn't made for the front wheel to keep it from rocking back... would have been very cheap to add one to the front similar to the rear.
Road bikes? sure. Mountain bikes that arent just 26ers? NO. I do NOT recommend this rack, for mountain bike purposes at least.
Love my 1up!
www.1up-usa.com/
Do you have 1 or 2 bike version?
I started off with just 1 but shortly thereafter opted for the second add-on tray to haul around my buddy's Ibis MTB as well. I'm pretty sure that they max out at a 4-bike capacity. It is solidly built, here in the USA, and not too many manufacturers can say that anymore.
I have a 1.25" receiver. I don't think 1-up sells a 2 bike rack (which is what I need) for a 1.25" receiver. Right?
I guess you would need to get a 1.25" single rack and one add on - but just guessing. give those guys a call, maybe they will hook you up...
Hey Clint any you would recommend for trail bikes I need one too carry two bikes same as what u have into the back of a trailer hitch on a car
The Dr. Tray looks to be a great option. I'm posting a review on it this weekend.
Clint Gibbs thanks for replying I love the content you make hope all is well after the storm
What a load of rubbish.I have been using this rack for two electric bikes, one 29inch weighing 26Kg and one 27.5 inch weighing 23Kg.I have never had any of these problems.Its a very good set up and I am very happy with it.
Unfortunately I had the same issues as Clint. If only I would have seen this video BEFORE buying one.
4:55 I agree it shouldn't even be possible for the arm to rotate all the way down but if somebody doesn't secure it properly before driving away, they are pretty stupid and it's their own fault.
*Clint* *Gibbs* said:
*"* if you want a 4 bike rack with unlimited offset options and not spend a lot of money the one made by Performance Bike is [a] great [option over this one]. I've used it for years. But you have to have a 2 inch receiver. *"*
Thanks. I actually had that rack for many years and did a review or two on it. Definitely one of the best racks for the money.
Do you not use your two timer anymore??
+jon zylka yes but I am about to replace it. Still a great rack. We're going to keep it For the family SUV since that has a 2 inch receiver and the two timer has an adapter.
Clint Gibbs I see. I too have the two timer and could not see replacing it. Too nice of a rack. Thats why I was curious. I was surprised to see you with a new rack. Couldn't see you replacing it.
Don't trust the lock cable as well, got by bike stolen leaving for 45min, very easy to cut
Is it good for 4.8 inch large tire FatBike?
No, I would check their website but I don't think they will fit on this rack.
@@ClintGibbs I think that the holdup Evo is good for fatbike
i have this rack and I don't like it either. I figured out right away that you must press the arm against the fork to keep the wheel down. I am a HUGE fan of the RockyMounts products now. Their racks make everyone else's look like toys except for Kuat. I won't bother with anything but Kuat and RockyMounts ever again.
+sdrapermail Rocky Mounts doesn't make a hitch rack for a 1.25" receiver
Clint try 1up
I've dumped two mountain bikes onto the road using this dumb bike rack. Miraculously this first one escaped without a scratch. The second time, I believe the fork bumped up against the front hook release button. I had literally just fixed my bike, and now I need a new brake handle, new handlebar, and a new rear derailer. I would never recommend this PoS rack to anybody
Buy the Kuat NV 2.0
Should have gone with a Kuat rack. Transfer 2 or Sherpa 2.
Just get the 1up.
From what I can tell 1up doesn't offer a 2-bike rack for a 1.25" hitch receiver.
Get the 1.25" rack and the add-on. It will 299+199. $500, but you won't have any more headaches.
Yeah you can actually run 3. The base rack and 2 add ons with the 1.25 rack.
have you looked at 1up?
From what I can tell 1up doesn't offer a 2-bike rack for a 1.25" hitch receiver.
true, never reailized that
They do. See my reply to your earlier post.
Dude, there's a slide on the bottom to shift the bikes left or right so they don't bump. I don't believe this is a flaw. Take care.
Like I mentioned at 4:30 I tried sliding them away as much as possible and it wasn’t enough. I’ve been using the QuickrStuff Mach 2 for about a year now and it’s the best rack I’ve ever use.
Just a Zip tie to your front wheel, not really a big issue I think.
Try a kuat nv2.0
Thule T2 Pro XT
Thule T2 pro is king
So move the arm out just a little bit further!! Duh! I drove from Dallas to Denver and back two bikes on the back.... No issues... Move the arm to where it does work! Ugh
Thanks, I almost got one. Dodged a bullet...
look at thule bike racks they are great.
+robert carr I thought about the T2 Pro XT but it looks like the bikes are pretty close together and not sure if there is enough offset
lol you can move the base so they don't touch. look up a video an see for you're self. good luck.
Its because they are oversize mtb
I cannot stand Yakima. Check out etrailer.com they have a lot of brands I love. They are awesome with their engineers and customer service. Tons of videos on each product. If you call with questions you can usually get in touch with one of their engineers.
I've found many little flaws with these overpriced racks from Thule and Yakima. One major one is rust. Being near the ocean I find these expensive systems corrode way too fast. Every single one
Don't waste your money get yourself a 1up USA!
Worried about rubbing paint off a “trail bike”. My trail bike gets used so it does not worry me. Sounds like you don’t do much riding apart for the footpath. Stay in your Honda buddy
Lol...I ride or race 5 days a week...MTB trails and gravel.
these racks are garbage, i found that making my own for very little money but sturdy is the best solution.
wow to worry about scuffing your paint on your fork you must not bike hard oh wait I see your bikes are shinny so ya you don't ride hard lmao 🤣
You mean I won all those races without riding hard! Dude, you just boosted my confidence.
Great review, in my opinion, this is awful, I would not use it on any bike, the plastic parts, and if they clicking mechanism will hold up is concerning, no offsed adjustment is silly,
so far the best rack I have seen is 1UP USA, here is BKXC's video th-cam.com/video/YHV7LffwMZU/w-d-xo.html
But I think I will get a Van so the bikes are as protected as possible.
I disagree with your review.
No problem. State your reasons if you don't mind.
I stated the problem with ur review but no reply. u should of tryed a little harder before trashing a product and I have no affiliation with the product if your wondering