LeekooLuu car rear backup camera installation show-7 inch monitor

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ก.ค. 2018
  • get this backup camera for your vehicle by search backup camera on Amazon.com
    or order it from amazon by link below:www.amazon.com/dp/B01FBYHW8C
  • ยานยนต์และพาหนะ

ความคิดเห็น • 33

  • @LesFilmsPennyLane
    @LesFilmsPennyLane 5 ปีที่แล้ว +1

    Merci beaucoup. Thanks a lot.

    • @alinaliu8943
      @alinaliu8943  5 ปีที่แล้ว

      you are always welcome .

  • @bombero42
    @bombero42 3 ปีที่แล้ว

    I see nothing on there about how to hook up the remote transmitter and receiver. The TH-cam address on the written instructions lead to a page that says video not available?

  • @jamessilverman4887
    @jamessilverman4887 3 ปีที่แล้ว

    How is a second camera wired. I have first wired to backup taillight. I want second to wire for same backup function, but I will mount camera at back of boat trailer.

  • @broccolihart1
    @broccolihart1 4 ปีที่แล้ว

    Alina, I have the wireless camera kit and I installed it inside the rear window of my honda element. It works great in the daytime but at night, the 6 led lights come on. Is there a way to disable the led lights at night?

    • @alinaliu8943
      @alinaliu8943  4 ปีที่แล้ว

      hi, please don't worry, mail to service@rearcamera.store for a camera without led. then will solve the night lights issue. great day.

  • @clusterx
    @clusterx ปีที่แล้ว

    is there sothing for audio ?? wire with video wire i mean av for old dvd ? can we play it ?

  • @kanakamaoli9642
    @kanakamaoli9642 ปีที่แล้ว

    Good job thanks allot

  • @sawmteakhawlhring6739
    @sawmteakhawlhring6739 2 ปีที่แล้ว

    What kind of battery are you using in this video please reply

  • @stewpuddy4161
    @stewpuddy4161 4 ปีที่แล้ว

    I don't get it. I installed mine like this, with the blue wire to my reverse light so that camera would override the other, and I get no signal on av1 and av2

    • @alinaliu8943
      @alinaliu8943  4 ปีที่แล้ว +1

      please check does the camera lights are light-on when in the dark? if not means the power cable, not correct connections.

  • @robertdelaat729
    @robertdelaat729 3 ปีที่แล้ว

    Can the green-yellow-red line be turned off, when I don't want them to be displayed ?

    • @alinaliu8943
      @alinaliu8943  3 ปีที่แล้ว

      yes, you can turn off it in the menu, presses the Menu key, when you see the guidelines on/off icon, you can press + and - key to turn on or off the lines, then waiting for 4 seconds quit the menu mode. then you will see the guidelines on or off.

  • @bgonzalezb08
    @bgonzalezb08 3 ปีที่แล้ว

    ¿Se pueden conectar dos cámaras simultáneamente en el monitor, y elegir con el botón AV1 o AV2?
    can you connect two cameras simultaneously on the monitor, and choose with the AV1 or AV2 button?

  • @SarmadRazaOfficial
    @SarmadRazaOfficial 2 ปีที่แล้ว

    Thanks

  • @ralphturner3798
    @ralphturner3798 2 ปีที่แล้ว

    What is the angle of view of the camera? Thanks

    • @ralphturner3798
      @ralphturner3798 2 ปีที่แล้ว +1

      I found out that the angle is 130 degrees.

  • @kapishgirdhar
    @kapishgirdhar 2 ปีที่แล้ว +1

    How to turn off camera guidelines?

  • @susiloagusp.9124
    @susiloagusp.9124 2 ปีที่แล้ว

    Bisa ngak camera tanpa lampu letd ada gambar ngak.

  • @SarmadRazaOfficial
    @SarmadRazaOfficial 2 ปีที่แล้ว

    Manual on off blue screen show not show camera

  • @jasilkp9475
    @jasilkp9475 5 ปีที่แล้ว

    It can connect usb

    • @alinaliu8943
      @alinaliu8943  5 ปีที่แล้ว

      the backup camera not include USB connector , and it can not connect with USB . what we show on the desk for power supply is a car charger adapter .

  • @alicecampolongo9594
    @alicecampolongo9594 4 ปีที่แล้ว

    what is the blue wire for?

    • @alinaliu8943
      @alinaliu8943  4 ปีที่แล้ว

      it's a trigger wire for reversing priority.you can use it or ignore it. it's useful when you connecting two cameras working at the same time on the monitor.

    • @valdrew6685
      @valdrew6685 4 ปีที่แล้ว

      @@alinaliu8943 can you confirm what the blue wire actually connects to?
      Thanks Phil

    • @alinaliu8943
      @alinaliu8943  4 ปีที่แล้ว

      @@valdrew6685 the blue wire is a trigger wire for priority of AV2 channel,this monitor without a split screen, so if you connected two cameras on this monitor, and both camera are on, so maybe you need a trigger wire to make the AV2 channel working prioritized when camera 2 was power on, it is optional to use, you can ingore it if you only connected a one camera to monitor or you can switch the channels by manual
      .

    • @karlmanubag6044
      @karlmanubag6044 4 ปีที่แล้ว

      @@alinaliu8943 Maybe what he meant was where do you connect it to for triggering, to GND or to +V.

    • @alinaliu8943
      @alinaliu8943  4 ปีที่แล้ว

      @@karlmanubag6044 connects with reverse gear then.

  • @peterorthmann5612
    @peterorthmann5612 2 ปีที่แล้ว

    For a couple of hundred bucks, you could hire professionals to do the demo properly. You would sell far more product. DON'T BE SO CHEAP