Handcart dolley replacing the wheels

Hello my friends. Just a video on helping out anyone who wants to repair and save their handcart. Surprising how you have to remove the rim and tire from the handcart and where to buy the inexpensive tires from Harbor Freight. Good tool to have to move around ammo, gear, equipment, heavy water jugs, etc.
Thanks for watching and subscribe and I appreciate you clicking on the like button. Take care and God Bless.

[@martinblnd]

Use a flat edge screw driver and a hammer to lightly tap around the edge of a push knot. That will spread them hem open enough to free it up. Tap it with a hammer to close it once it’s off and reset it. That simple.

[@ltb5882]

I did exactly this. Worked like a charm. And I'm able to reuse the washer

[@martinblnd]

L TB, yeah it works pretty good.

[@SpookyInc]

Thanks! I finally got around to changing my hand truck’s wheels today using your process and it worked like a charm 😀

[@felipeandres6921]

Great Video! Thanks for taking the time to share your solution,I appreciate it! I myself am putting the front wheels of a Toro 1638HXL lawn mower tractor that I found in the junkyard on my Handcart dolley to haul around Half ton capacity floor jacks.

[@dennisbening8660]

After you get the washer and wheel off, drill a hole in the end of the axle and install a cotter pin. Much easier to change the next time.

[@Gerrosimo1]

Wow. Thank you.
These things are a real pain.

[@JHGwjesusLuv]

Thanks great good idea with the hinge pin!

[@Joedoriamusic]

Ever heard of a cotter pin? Thats what the hole is designed for. 1 min to install.

[@vwxyzabcde4330]

Yes I think a cotter pin would be easier to change

[@rezyness]

Like you I don't like to throw things away. Got two dollys to replace their tires. One has holes n the other one doesn't

[@BarbAlford]

Amazon carries the lock washers and they have tubes for the tires too.

[@oscarmora6152]

I used a Dremel with a cutting blade to remove the lock washer!

[@MrPacker25]

great way of moving equipment

[@JBHORNS29]

Thanks for the video, exact same problem

[@icyborg6065]

That ring that is hard to remove is dangerous, it only works on the cart if you are moving light stuff and there is no strain on the wheels. My cart had lost it long time ago probably when I hauled washer and dryer. Dangerously without realizing I had lost that ring, I hauled my Yamaha amp. Thank to my lord, the wheel did not came off while hauling the amp. I solved my problem with double split clamping shaft collar.

[@redrover47]

Thanks, good solution. However, next time perhaps have someone hold your video camera so we can see how you solved your "nightmare".

[@rocketrider1405]

And move into the sunlight rather than filming in the shade. Thanks for a solution though !

[@Ghostginthree]

Haha I agree, sometimes I have no camera woman to help but I know what you mean. Thanks for watching

[@Ghostginthree]

Haha I know, did not realize how that affected the video but just wanted to post it just raw straight to the point but thanks for pointing that out. Glad you liked it and thanks for watching.

[@JESSEPOLANCO100]

Thank you for the video. I too am having the same problem, however, it was frustrating trying to keep up with the image... Thanks though.

[@Ghostginthree]

I am not that great on video taping, working on it but glad the video helped.

[@normwhiff]

Piece of coat hanger wire works.

[@sbhministry]

Spend a little more and get worry free tires from hf. I've had mine for years. They're great.

[@Ghostginthree]

Thanks for the info. I figured it would be an easy fix compared to buying new tires but I agree, I will get some worry free tires. Thanks for watching and the info.

[@lindacox6551]

All you need is a hinge clip or hinge cap! Lowe's or Home depot

[@Ghostginthree]

Thanks for the info

[@zapitlucero7576]

Take a big hammer to the backside the wheel it will take off the ring and you should be able to reuse it

[@DateTwoRelate]

Let's see. I use hand trucks for moving around mostly boxes, stacks of stuff, small appliances, etc. Not so much ammo. #myloss

[@deliberatelycasualasmr8256]

Sounds like a good use for Fix-A-Flat!!

[@Ghostginthree]

Roy Munson You know brother I did use that, glad you mentioned this. I should have said something about it on my video. I did use fix a flat and it did work but the tire would go flat after a month or so, over 3 times. So not worth buying can after can to keep it going. This worked better and overall but glad you reminded me of this. Thanks.

[@ngtflyer]

Harbor Freight carries those inner tubes for a few bucks each.

[@Ghostginthree]

Thanks. I thought so too and went there to look for them and they did not have them but will check again now that you told me. Thanks

[@Phjghh]

I am unable to remove the cap on the wheel. You didn't show how to remove the cap.

[@um8440]

I hope u know how to record now after 8y, put the camera in the area that you want people to see, simple but u fail. I just use a nail instead of pin.

[@loucifer323]

Tractor supply carry them

[@mikenate8576]

or put the dolly on the side and hammer the rims to push out the lock washer which is 5/8 of an inch

[@bernardopareja9091]

Next time u want to make a video how to change the tire in ur dolly u have to actually see what ur doing, sorry just my opinion

[@jontnoneya3404]

No we can't see this haha

[@Jeff82556]

Believe it or not, it's called a "DOLLY". "Dolley" is a woman's name.

[@tomb1734]

Really good info but really bad video shots

[@ScrappyTheKnell]

The washer looking fastener is called a bunch of different names: Push Nuts, Starlock, Star Washer, Speed Nuts, Push Ons, Push On Fixes.
Unfortunately I still couldn't find the size I needed in stores.

[@babaregi5934]

Amazon