I have the same problem with the selector switch. I tried to tighten the screw but it was already tight. Funny I was wondering if it would run with only one co2. Thanks for the info. Nice review.
Great tips and can we break down the bolt assembly to lune or just put oil where it slides? I just bought this rifle from Walmart and I have several airsoft ARs and those break down like my real one so I’m still new to this one.
Thank you!This is a very good video and the gun has much power.And the automatic fire is new.I myself have some Airguns and C02 Umarex schort guns.I was German Bundeswehr 15 month 10/79-12/80.Here in Germany are strong restrictions 7,5 joule and no schooting outside.Mfg.Rudi 66 years brown Belt Karate-Do
Nice shooting for open sight with 340 fps bb. Co2 and BBs always gives a few off shots. Those sights must be good. I love giving a guns sights a chance and seeing what it will do. I will only scope or red dot if absolutely needed or longer range. I can tell you have a lot of experience with air guns. When I saw what you did with that Nightstalker was masterful. I hope to have your skills one day. I’ve never even opened up an air gun. I happened to love anything Crosman. I’m cheap and like to see what cheap guns are capable of. Under 200$ is in my target. I wanted a full auto Crosman bb but this looks awesome and can do some burst at auto.
Another fine review on top of the box opening vid. You're right about the oiler/sling slot, I didn't think of that. I like the single CO2 test. Maybe you don't need 430 when 380 will do as you showed. Good shooting, that last can was tough 'cause you were low on gas too I think. Subbed and gonna look at your older stuff on gun I have or want to buy. You do a pretty good review. Thanks.
I enjoyed the video. What is the grease or oil you are using on the co2 cartridge? Could you show a close up of the co2 cartridge being installed and removed from the rifle?
You can use the Crosman Pellgun oil which can be purchase from Amazon/ ebay/ pyramyd air. I would use a drop or two on the o-ring which is on the plug that houses the two co2 cartridges and a drop on each cartridge.
Another issue I had was I didn't know you needed to cock the charge handle back cause sometimes it just worked and sometimes it didnt. If not firing and everything should be loaded check the charge handle
Just watched your other video. I thought you'd compare it to the Air Venturi Springfield Armory M1 Carbine that you have. I have one, too. Just realized I've been watching your stuff for years. I've jumped up to PCPs. Accuracy is spot on, power is awesome, and long distances are easily achievable. Most of my 60-70 CO2 gun collection is up for grabs. Do you have any PCPs? I know you have the Komplete.
I like the videos I'm an old man but I went out and bought one of these today just because I seen your videos ,I'm gonna buy my brother one of them too and he is 75 we are both kids at heart but I felt jipped when I got it out of the box and there wasn't a terrorist mask in it. LOL , no really your videos sold me
Don't let Crossman see those Daisy BB's The reason Crossman BB's are supposed to be better is the copper coating and it's believe and billed to be easier on the barrel of the Rifle or Gun. Over the Zinc or Steel BB's 👍
You DON'T want to oil the seals and CO2 cartridges every single time maybe every 5 times if not 10 times. I have the Crosman DPMS SBR full auto rifle and after about 6 months of constant use and adding a drop of pellgun oil to every new CO2 cartridge the gun started falling apart especially at the hammering mechanism and internals because it was over oiled and lubricated by that drop of pellgun oil. I'm sure it will happen to this gun too and any other full auto if you over oil it.
You shouldn't be running modern CO2 airguns using Pellgun Oil period. All it is SAE30 red engine oil (Monolec GFS Engine Oil 8430), which is a petroleum product. All AG makers from KWC to Barra to SIG will tell you USE 100% SILICONE OIL ONLY! Why people pay good money for those little tubes amazes me still. Petroleum oils (PO) turn to jello and start to separate when exposed to rapid freeze released from the CO2, POs will cause rubbers to swell and degrade (like your BB transfer block from the mag to barrel on the Crosman rifles). POs also get into the air valves getting gunked up over time and because they don't protect well from low temps, seals will wear much faster than using a very light silicone oil regularly. I run both my R1s wet, oiling the tanks tops every change out and a little bit of custom silicone grease/oil mix for slides/bolts and internals.
Will you help me understand? Why do you kids wear those hoods on your head? A person with a hood coming at me is gonna die if they have a gun. I understand it in cold weather. Good shooting.
Please pardon my lack of knowledge, but I was unaware that a lot of other people were wearing face coverings. I do so because I'm a nobody and would just like to keep my face off the internet. Me personally I think it's more important now with A.I. being used a lot more. If my face is not shown then no one can make any accusation about me. Also I'm a Government Contractor and I would just like to keep my Identity on the low because I really love my job and being employed.
I certainly understand and agree with your desire for privacy, especially in this world where controversy can be created from nothing. I enjoy your reviews very much. This Crosman M1 Auto is on my "to buy" radar because of your two videos on it. Thank you again, and I look forward to any other airgun reviews that you do. @@turbo15100
@@turbo15100 Thank you. That makes perfect sense. I live in Houston Tx & when I see folks with a head cover they are about to commit a crime or just running from one. Keep strapped people, this world has changed.
I would agree that Umarex is the king when It comes to replicas, but the rate of fire on this rifle is insane which really brings a smile to your face and currently I don't know of any Umarex product that can shoot as fast.
@@turbo15100 The Hatsan Blitz is .30 caliber and is full auto PCP. It's not a replica of anything and completely blows your kid`s toy away with 1,000 rounds per minute and 1150 fps. Why waste money on a bb gun toy.
I do so because I'm a nobody and would just like to keep my face off the internet. Me personally I this it's more important now with A.I. being used a lot more. If my face is not shown then no one can make any accusation about me. Also I'm a Government Contractor and I would just like to keep my Identity on the low because I really love my job and being employed.
Outstanding detailed video! Great job!
I really appreciate you watching.
What an articulate young man. Great video, totally agree about the mask but each to their own
I think everyone that owns more than five guns wants one of these. Fun fun fun!
wow. thats some great off hand shooting. your presentation skills are impressive. thanks for the info. I like that rifle.
Nice video, and great plinking!!!!
Thank You!
I have the same problem with the selector switch. I tried to tighten the screw but it was already tight. Funny I was wondering if it would run with only one co2. Thanks for the info. Nice review.
Great tips and can we break down the bolt assembly to lune or just put oil where it slides? I just bought this rifle from Walmart and I have several airsoft ARs and those break down like my real one so I’m still new to this one.
Thank you!This is a very good video and the gun has much power.And the automatic fire is new.I myself have some Airguns and C02 Umarex schort guns.I was German Bundeswehr 15 month 10/79-12/80.Here in Germany are strong restrictions 7,5 joule and no schooting outside.Mfg.Rudi 66 years brown Belt Karate-Do
Nice shooting for open sight with 340 fps bb. Co2 and BBs always gives a few off shots. Those sights must be good. I love giving a guns sights a chance and seeing what it will do. I will only scope or red dot if absolutely needed or longer range.
I can tell you have a lot of experience with air guns. When I saw what you did with that Nightstalker was masterful. I hope to have your skills one day. I’ve never even opened up an air gun.
I happened to love anything Crosman. I’m cheap and like to see what cheap guns are capable of. Under 200$ is in my target. I wanted a full auto Crosman bb but this looks awesome and can do some burst at auto.
Very informative video thanks
I over tightened my co2 the first time trying to listen to it air up. Just thought I'd let people know just tighten up a lil past snug.
I did too
Did it hurt anything overtightnig it?
Nice video very informative
Thanks a lot!
Another fine review on top of the box opening vid. You're right about the oiler/sling slot, I didn't think of that. I like the single CO2 test. Maybe you don't need 430 when 380 will do as you showed. Good shooting, that last can was tough 'cause you were low on gas too I think.
Subbed and gonna look at your older stuff on gun I have or want to buy. You do a pretty good review. Thanks.
I enjoyed the video. What is the grease or oil you are using on the co2 cartridge? Could you show a close up of the co2 cartridge being installed and removed from the rifle?
Crosman Pellgun oil.
I own many real guns but that thing looks like so much fun I have got to get one thanks for the video bro😊
Can you explain the parts that need oiled and which oil is appropriate to use.
You can use the Crosman Pellgun oil which can be purchase from Amazon/ ebay/ pyramyd air. I would use a drop or two on the o-ring which is on the plug that houses the two co2 cartridges and a drop on each cartridge.
Must be cold as hell there
It was 75 degrees the day I filmed this video.
Thanks for sharing. Plinking only, not for hunting ?
Yes, Plinking only.
@@turbo15100 Thanks
Another issue I had was I didn't know you needed to cock the charge handle back cause sometimes it just worked and sometimes it didnt. If not firing and everything should be loaded check the charge handle
You have done nice reviews but still would like to know if you can put any type of optic on it.
Thanks. I plan this week to see about mounting an optic because I want to compare this rifle with another one.
Great video
Thanks for the visit
10s max full CO2 replacement and reload bro.
Wo gibt es den das Gewehr den in der Orginal US Version in Europa frei zu Kaufen ?k
I'm sorry but I don't have the answer to this question.
Just watched your other video. I thought you'd compare it to the Air Venturi Springfield Armory M1 Carbine that you have. I have one, too. Just realized I've been watching your stuff for years. I've jumped up to PCPs. Accuracy is spot on, power is awesome, and long distances are easily achievable. Most of my 60-70 CO2 gun collection is up for grabs. Do you have any PCPs? I know you have the Komplete.
The comparison between the Springfield Armory rifle is coming.
Good Job!
Thank you!
Thank you for sharing this with us. I need one.
You are so welcome!
Why the ski mask?It only brings bad connotations in an otherwise decent review.
Privacy
Crime
Some people may want to cover their face to prevent google machine learning your face but still want to communicate on the platform
It’s because you’re gay
I like the videos I'm an old man but I went out and bought one of these today just because I seen your videos ,I'm gonna buy my brother one of them too and he is 75 we are both kids at heart but I felt jipped when I got it out of the box and there wasn't a terrorist mask in it. LOL , no really your videos sold me
👍🏻
Don't let Crossman see those Daisy BB's
The reason Crossman BB's are supposed to be better is the copper coating and it's believe and billed to be easier on the barrel of the Rifle or Gun.
Over the Zinc or Steel BB's
👍
Crossman is now owned by Daisy. so no conflict.
Training shows.
You DON'T want to oil the seals and CO2 cartridges every single time maybe every 5 times if not 10 times. I have the Crosman DPMS SBR full auto rifle and after about 6 months of constant use and adding a drop of pellgun oil to every new CO2 cartridge the gun started falling apart especially at the hammering mechanism and internals because it was over oiled and lubricated by that drop of pellgun oil. I'm sure it will happen to this gun too and any other full auto if you over oil it.
I did not know that. Thanks.
You shouldn't be running modern CO2 airguns using Pellgun Oil period. All it is SAE30 red engine oil (Monolec GFS Engine Oil 8430), which is a petroleum product. All AG makers from KWC to Barra to SIG will tell you USE 100% SILICONE OIL ONLY! Why people pay good money for those little tubes amazes me still. Petroleum oils (PO) turn to jello and start to separate when exposed to rapid freeze released from the CO2, POs will cause rubbers to swell and degrade (like your BB transfer block from the mag to barrel on the Crosman rifles). POs also get into the air valves getting gunked up over time and because they don't protect well from low temps, seals will wear much faster than using a very light silicone oil regularly. I run both my R1s wet, oiling the tanks tops every change out and a little bit of custom silicone grease/oil mix for slides/bolts and internals.
Bring some more airgun content.
I will do that.
Warum versteckt der sein Gesicht bei der Vorstellung ein Lufgewehr in den USA ?
To say employed. I make no money from the videos.
Plzzzzzz.. I'm trying save money 😂😭😭but i want this so bad
Will you help me understand? Why do you kids wear those hoods on your head? A person with a hood coming at me is gonna die if they have a gun. I understand it in cold weather. Good shooting.
Privacy
Please pardon my lack of knowledge, but I was unaware that a lot of other people were wearing face coverings. I do so because I'm a nobody and would just like to keep my face off the internet. Me personally I think it's more important now with A.I. being used a lot more. If my face is not shown then no one can make any accusation about me. Also I'm a Government Contractor and I would just like to keep my Identity on the low because I really love my job and being employed.
I certainly understand and agree with your desire for privacy, especially in this world where controversy can be created from nothing. I enjoy your reviews very much. This Crosman M1 Auto is on my "to buy" radar because of your two videos on it. Thank you again, and I look forward to any other airgun reviews that you do. @@turbo15100
@@turbo15100 Thank you. That makes perfect sense. I live in Houston Tx & when I see folks with a head cover they are about to commit a crime or just running from one. Keep strapped people, this world has changed.
Weak and costs too much for a toy. Umarex is WAY better.
I would agree that Umarex is the king when It comes to replicas, but the rate of fire on this rifle is insane which really brings a smile to your face and currently I don't know of any Umarex product that can shoot as fast.
@@turbo15100 The Hatsan Blitz is .30 caliber and is full auto PCP. It's not a replica of anything and completely blows your kid`s toy away with 1,000 rounds per minute and 1150 fps. Why waste money on a bb gun toy.
What's with the mask??
I do so because I'm a nobody and would just like to keep my face off the internet. Me personally I this it's more important now with A.I. being used a lot more. If my face is not shown then no one can make any accusation about me. Also I'm a Government Contractor and I would just like to keep my Identity on the low because I really love my job and being employed.