ฝัง
- เผยแพร่เมื่อ 28 พ.ค. 2024
- All desk, no cable mess. Our Head of Industrial Design, Vincent Sin, walks us through the elevated features of the all-new Secretlab MAGNUS Pro - our first sit-to-stand desk that reimagines the moving experience for gamers and professionals.
Learn more: secretlab.co/magnuspro
Secretlab on Facebook: / secretlab
Secretlab on Instagram: / secretlab
Secretlab on Twitter: / secretlabchairs
Secretlab on TikTok: / secretlab
#Secretlab #gamingdesk #standingdesk #cablemanagement #desksetup #setup #ergonomic #wfh #workfromhome #battlestation #workstation #gamingsetup - เกม
MAGNUS Pro and MAGNUS are now shipping to:
US 🇺🇸
CA 🇨🇦 (NEW!)
MY 🇲🇾 (NEW!)
EU 🇪🇺
UK 🇬🇧
AU 🇦🇺
SG 🇸🇬
Don't see yours? Sign up to our mailing list to make sure you're the first to know when Secretlab MAGNUS arrives on your shores secretlab.co/magnuspro
Hope they ship to Philippines :(
Nice, but make also an option to choose:
+ a complete silver, white, glas, or and transparent version of the table too;
+ white and transparent cables;
+ more sizes variants.
they shipped to Australia before Canada? make it make sense
Make it available for your PH fans please :(
NZ please, we're next door to Australia 😁
My only suggestions would be some more patterns for the MAGPADs, I'd like to see stone and wood patterns for some natural aestethics. A heavy-duty monitor arm for ultra wide screen would be nice. The cable channels on the left and right side of the desk need a bigger opening going into the cable tray on the back. But the price and value of this desk is spot on.
Agreed. Needs wood effect magpads to brighten it a bit not everyone wants a black/dark table top. Also monitor arms should be able to lift the heavier ultra wide monitors (30lbs+)
I have always complained that standing desks are ugly-looking. When I saw your ad pop up on Instagram, I was delighted to find that finally someone understands the needs of the user. Looking forward to buying it when I move to a new home!
Bought this desk about a month ago. This is possibly the best desk on the planet right now. Cable management is absolutely amazing.
Only gripe I have is with support of 3rd party monitor arms - which I had from before and had to do some major compromises to get it mounted to the desk.
How does the desk feel to hand? Does the metal make a clunky sound?
@@misbakhan20 No sounds at all - there is this leatherette cover over the table, which isnt too soft, but not hard either - its not cold because of it, and I can sit with short sleeves and still have my arms on the desk without freezing. I live in fairly cold country too.
But you got your monitor arm to work though? I got. Triple monitor stand and thinking about getting this desk. Just don't want to have to spend extra $400 on stands when I got one.
@@TylerPlunkett9 I had to angle grind a bit of the old holder for it to fit - it also does not fit where the cable management tray is underneath - I could cut that too, but decided not to - so I have now my 3x screen setup on a corner of the desk where it could fit
Hey! Late to the party but hopefully you see this! I know you already answered this question but just needed some additional clarification. I know that secretlab makes their own monitor arms but I have a 43" ultrawide monitor (they don't make arms for that), so I have my own. Are you saying that it won't fit onto the desk? Or if it does, will it completely block that back cable tray? I'm seriously considering this desk, any information would be helpful :)
Just ordered one. Can’t wait.
Did you get it yet?
Get mine at the end of October! I'm excited!
I just put my order in for the Magnus Pro. I can't wait to get it. Such a badass looking table. Well done.
never heard anyone call a table badass before in my life on this planet
@@varunaX he just feels cool bc he spend almost 1000 on a table that glows and hides cables
@@marcosmaciel1347 🤓
This is incredible! I'd love to see how it would look in my studio.
The original Magnus was a great desk but I think you guys absolutely nailed it with the Pro. Personally I think the price point is spot on. I'll definitely be purchasing one. One question though, will the pc arm support larger cases such as the Lian Li OP series? Thanks SL and very well done!
Hey, thank you so much for your support, really. To share more, our PC mount can accommodate to PC cases with heights between 354mm to 543mm and widths ranging from 170mm to 300mm. We do recommend that you check out its specific measurements on our page to see if it'll fit your PC. secretlab.co/pages/resources?product=desk-accessory Hope this helps!
Just to save everyone a click.
Dimension wise it fits but the weight limit of 15Kg will probably be the KO. The Lian Li Dynamic XL case itself weights around 10-11Kg and the pc mount can handle up to 15Kg. So a "light" (if that is even a thing) build may fit but be sure to check first.
@@Zockmock thank you legend! Lian li XL plus the new 4090 is 100% KO
You think just shy of $1,000 for the Pro, which doesn't even include half of the features they show in its cost, is good pricing?
@@WinterReflections that's what I said lol
Im in love with my desk but ... this looks amazing.
If everything was in stock ready to ship I'd have purchased one tonight with all the add ons but don't want to wait until next year
Yeah, I've been looking at these desks periodically over a two year period since the original, I don't know if I've EVER seen the desks + accessories in stock. They're always on preorder and it has to be intentional.
i love this desk! but i' m waiting for a corner version :-)
This was scarily well timed with it's announcement. I'd recently started looking at desks to replalce my current old one and was liking the look of the magnus, but wanted to get a sit-to-stand desk instead for the variety usage. Due to arrive tomorrow, so looking forward to seeing how long it takes to get setup. Instructions say it won't take too long to assemble, but with the clutter/lack of free space in my room, clearing and dismantling the old desk first, and then giving the carpet area a clean before setup......it could take a while :P
9 months later, how is it? I'm looking at getting one myself.
Ordered the Magnus Pro XL can wait to get it setup with my new HDR video edit suite. Will upload a review in November when it arrives. This desk with an Apple Mac Studio M1Max and 42" ASUS Rog Strix HDR OLED is going to look awesome.
Needs support for a 4+ monitor setup for monitors that are mounted horizontally while stacked vertically 2 high on top of each other (2x2). Would be an awesome desk for software development if you built something like this. Specifically I'd like to see some accessories that can support 4x 32" monitors without harming the desk.
@@Culperrr Not with the monitor mounts they supply. You might be able to make another mount work but you'd probably be better off using 2 or 3 mounts spread across the desk to accomplish that.
@@serenazahora5431 For weight distribution?
Wow! It's official, I'm in love with it. Time to start saving for one as I am disabled and bed bound which makes it impossible for me to get anything done even with my height adjustable hospital bed. I end up having to have an over the bed desk making it hard for me to put my feet on the ground. This is super cute, practical and neat 👌
So much Tim Cook vibe in the presentation :) Love the new Magnus desks, especially the XL version.
love my chair cant wait to buy the desk
Are there plans to make a white version?
Yeaa me 2 have a white setup.. dont want to mess it up with a black table 🥹
This would make the perfect purchase for me if they designed a white one🙁
Listen to the people! My money is ready!
Wood top would be nice
No plans to build a privileged desk. Check yourself.
I'd love to see an L shaped extension for this like there was with the previous desk. I'd snap that up in a heartbeat.
Like it! A lot! What is missing:
- an Ethernetkable that runs like that build in Power Input from the Base foot to the PC
- I would prefer something more like a "Cutting Mat" instead of that leather thing
I would totally get this if I had the room 😆
I waited that my whole life... I'm buying it. Right now.
I'm still waiting for the desk to arrive in California for over a month. It would be easier if the desk could be purchased from a store.
My god this is beautiful
The thing I love about secretlab is they always make sure you get your money's worth.
I sure hope so, you're gonna spend $1,000 minimum just for the desk + desk mat, without even getting into shipping and other accessories.
You guys are geniuses.
I'm definitely keen for one. What PC case is in the video? I'd have to downsize mine to fit in there (currently at 21kg)!
This would be perfect for Odyssey Ark!
If you could make a three monitor mount, I'd be in heaven.
I'm definitely buying one of these in the coming half year. Compared to other motorized high-quality desks it ain't THAT much more expensive and compared to the cheap motorized stuff, this will probably outlast most by a long shot if as durable as claimed. Plus being steel opens the way for a lot of little DIY add-ons, like say 3D-Printed magnetic brackets to hold a Ethernet Switch on the underside or the legs.
Do have some specific questions on some dimensions i may inquire about via the website. Notably of the back cable tray.
Have you considered that none of the accessories/features advertised are included? Even down to the desk mat Every little piece that makes it novel is sold separately for ridiculous markups.
The pro is cool but the price is high. Maybe your next desk could be a Magnus XL without the sit-to-stand functionality. Keep the other features, but reduce the price and give us a 70 inch desk that acts like the original..
Because the only thing I didn't like about the original magnus was the length of the desk.
Def agree. Love the xL length but want the L-shape add on too
The price should be lower AND they should at very least include the mats in that price. It seems to me the desk mat isn't really a bonus add on, and is actually pretty much essential.
Wish these came with metal castor wheels for mobility in our photo studio
I really love this design, and will order at the end of the month!
Maybe a nice future, you see a lot of gamers using this desk.
What if there would be a possibility to hang a console (PS5/Xbox) just like the pc? to free up deskspace
Damn, when I finally graduate next year, I will buy one of these desks. Hope u ship to GER.
I have been a Secret Lab support for years now from the titan chair too many accessories. However, sadly I found out that I am not qualified to purchase this MAGNUS desk because it doesn't ship to Taiwan. I've contacted your one of the staff member today about this problem and wished to come up with a plan, I even offered to pay extra for shipping. Becuase this table is big and couldn't ship to Taiwan I suggested that how about we seperate the parts and I'll happily pay for everything. Becuase this is the desk of my dreams, I've been saving money ever since I heard sercet lab were going to make this table and now it's a shame I couldn't purchase my dream desk.
Making me want to sell my magnus for this excellent design
Bloody amazing
Bring this & the rest of your products to South East Asian markets please!
Wish they had this in the Philippines
Im extreamly torn now. I was so excited about the L desk extension and now I have this to consider. Wish there was a Sit to Stand Secretlabs L Desk. 😖
We totally understand that everyone has their requirements. At the moment, we don't have news of a L-Shaped Desk extension for the MAGNUS Pro yet, but do stay subscribed for the latest news at secretlab.co/magnuspro!
Same! Need the L shape
You know it would be great if you guys listed the Current (A) and Total power usage (W) for the electical specification before people gonna over plug the device on the table or fried their expensive PC or other electronic 😉 But my best guess is that the power cable you guys used is rated "10 A", therefore the power usage is limited to 1000W (if outlet provides 100V) or 2400W (if outlet provides 240V) which I don't think is safe for high end PC (esp with RTX 4090) lol
I am interested in this for my second office. With the cable management compartment, will I be able to clamp my Elgato Key Lights to the desk?
Just make it a 4-legged version and there is perfection! plus the warranty needs to match other table manufacturers too....5 years is too less compared to the average 10-year standard.
Next year baby!
Next year cos I just recently got the omnidesk wildwood xl 😂
Do you think the pc mount will be updated for newer/larger cases? for example LianLi O11 Dynamic Evo XL - which the height of the case fits the dimensions of the mount but the width is longer than what the mount can handle.
Would be good to know the power draw of the motor, I use UPS units for my PC and streaming equipment, these have a limited load capacity and I may not be able to use the power passthrough with an electric motor in the desk.
im tryna upgrade my setup and the desk will be too i just seen this was just released will the new hyte y60 case fit the pc pc mount
What if your wall power comes from the right side of the desk? The legs should have been interchangeable, so that the power cord could be connected on the right side if necessary. As it is, I would have awesome cable management except for the power cord running across the floor for the entire length of the desk. And I doubt it's long enough to (nor should I have to) run it up the right leg, through the cable tray, and back down the left leg to plug it in to the wall for a clean look.
When is the LAN extension for the desk leg coming out? Desk seems incomplete without it
I have the monitor arm. Do I clamp it to the rgb strip or does the rgb strip go over it
One major miss is that nicely concealed power routing in the left leg isn't configurable. If your desk only has the right side touching your going to have to route a long cable from the right side over to the left side just to power the desk. Two bad the powered leg couldn't have been put on either side at assembly.
I love my magnus desk, i would never get any other gaming desk again besides secretlab
Appreciate the kind words - we're glad the MAGNUS has served you well!
You guys are putting together an amazing company. I'm sold on this desk, need one for my son.
Same here, looking to buy one for my son, this one fits all needs :)
el setup de mis sueños definitivamente
looks cool for dj desk
Can you daisychain them so having 3 forming a U shape but raising or lowering one rasises or lowers them all? For people who work and play from home, a two monitor desk is often insufficient. I use two monitors for my main desktop, two for my work laptop, and often like to have my own laptop open on the side. I have yet to find a desk that offers a good solution to this. I'm currently using two L shaped desks put together to form a I_I shape but it isn't ideal.
Can the monitors be stacked horizontally on top of themselves with that dual monitor stand ? Waiting for these desks to arrival in AU which should be in a couple of months :)
Hi there, our MAGNUS Dual Monitor Arm does not support the stacking of monitors at the moment, but we'll be sure to share your feedback with our Product team for future consideration. Thank you.
Hi, nice desk! I'm very interested but I have a question : are the monitor arms compatible with an Alienware AW3423DW or a Samsung Odyssey Neo G9 49", which are quite large monitors?
Also, is the RGB strip compatible with Philips Hue in a way?
Ah just asked the same thing . Love the look and functionaly of this product .
If they are heavier than 17 lbs than no as per the double arm monitor mount system says each arm limit is 17 lbs.
Well after 3 months of looking at reviews for a standing desk i think I found the one.
Wow!
@secretlab, what about Ethernet cables? Do they still dangle or is that connect into the desk as well?
Looks super nice, would love to get one so I could use the PC mount, I have a custom loop 5000T though and the empty case itself weighs 14.5kg. The mount says it has a limit of 15kg. Any chance of heavier support in the future?
Also, my two predator monitors have chunky power bricks with their cables, are these typically hideable within the desk also?
Hey Akairem, the built-in cable management tray in the Secretlab MAGNUS Pro and Secretlab MAGNUS Pro XL is bigger than before, now measuring 111mm deep. You can check the dimensions of your power brick to see if it will sit inside the tray. To add on, while the current Secretlab Premium PC Mount can hold up to 15kg and can hold most PC cases, we know that in special cases, such as yours, you might need more, and we'll bring this up with our Product guys!
@@Secretlabchairs Thanks for the reply :) I hope the heavier support can come soon and i'll defo look to get one
@@Secretlabchairs I would also be interested to see a larger mount as I'm running an Omen 45L that weighs around 22kg and would like a desk that could mount it.
Would also be interested if a mount for heavier case would be possible. Has been using a Corsair 200R which likely would be no issue, but before ordering this desk I'd recently upgraded to a 780T for better airflow (no mid-towers availabe had everything I needed/wanted). The 780T is rather heavy, just on it's own, so with the PSU added, it definitely exceeds the weight limit for the current mount. It's also not a clean box shape, so even if the mount coulld support the weight, I'm not sure whether it would handle cases with curved or angled edges :S
ngl this installation looks way better than the other company in Singapore. Absolute nightmare assembling my friend's O___desk
Is it possible to install the pc mounting system on either side of the desk?
Can you attach any Elgato Stream lights or camera mounts to the table ?
The monitor arms look really slick, but will a standard clamp-on monitor mount work? I already have one, so I'd hate to have to buy another just to use with this desk.
We'd strongly recommend using the MAGNUS Monitor Arms as they have been designed to work with the Secretlab MAGNUS Pro optimally, but you can check out specifications sheet for the MAGNUS Pro to see if your existing mount is compatible: secretlab.co/pages/resources
SecretLab, what is the brand of monitor in the video and what size screen?
Will other monitor arms work on this desk while also allowing the cable management cover to fully close? My monitor is too big and heavy for the monitor arms that you sell.
Our MAGNUS Pro is designed to work with a vast majority of monitor arms with a screw clamp length of under 100mm. As long as your existing monitor arm falls within the shared specifications, it should be able to fit the MAGNUS Pro. For a more detailed specification of our desks, head over to secretlab.co/resources!
Would love to get one asap but the XL doesn't ship out for another 3 months. Too long to wait when you need a desk for daily work...
I want, no I actually NEED this desk. STAT YESTERDAY!!!
Please make shipping this available with USPS. I want one but due to my location I can’t accept the UPS or FedEx deliveries.😕
Make a 60-70 inch Walnut wooden top version and you have a deal.
I need it in white. I have an all white aesthetic. I can't ruin that now.
Will the desk hold a Samsung odyssey ark 55”? The weight is 41,5 kg. I’m looking for something and I think Magnus pro is a great option
Just ordered mine. This deks just fit my needs to a T! However my only complaint is having to wait 4+ months to receive it. This Is a little much in my opinion. I knew this ahead of time so I cannot place the blame on Secretlab.
Hi Javier, we appreciate your support and we're glad to hear that the MAGNUS Pro is exactly what you're looking for. We know that you're excited to get your hands on the desk, so hang tight and rest assured that our team is doing everything they can to get your order to you as soon as possible.
I like the idea of the hanging PC mount but my Phanteks Enthoo Primo Full Tower weighs a ton. Wonder if it would support it. And does the single arm monitor mount support 38" ultra wides?
We are unsure of the specifications for your PC, but our Premium PC Mount can support up to 25kg/55.1lbs. You can also find the full specifications for supported dimensions under the Resource section her: secretlab.co/products/premium-pc-mount.
As to our MAGNUS Monitor arm, we're working on a Heavy-Duty Monitor Arm that support wider and heavier displays, and we'll share more details when those are made available.
Damn, this looks amazing! Do you need a mat though? The leather top surface is a little odd to me. If you dont add a mat, is the surface just hard metal?
According to their FAQ: You can use the Magnus desks without a mat, in which case you would have the powder-coated steel surface and two ridges at the side.
They do advise to use the PU leatherette pad as it protects the surface, is more comfortable and is replaceable.
Appreciate the support! We strongly using the Secretlab MAGPAD with the MAGNUS to protect your desk's surface. It's also specially designed to deliver a comfortable feel under the skin.
They intentionally made it so the desk is uncomfortable and less practical if you don't buy their mat as well. It's weird to me how they act like the mat is a "bonus'" and optional so they can sell it separately.
@@SecretlabchairsThe mat should be included. The desk is objectively worse if it's just bare metal with ridges on each side. Why does it cost extra? Why only PU leather?
Any chance you'll make it in different colors?
Just got mine and love it.
One thing I'm not happy with is that you call it a metallic desk, when it's largely made from a wood composite and then plated with metal.
Question: Do you have any issues with the desk being easy to wobble around from pushing?
@@GamingLoodsAlmere not at all. Very sturdy.
Will the monitor arms support the weight of a Mac Studio Display at max height? If so, I may just have to purchase the arms alongside my Magnus Pro.
The Secretlab MAGNUS Monitor Arm can support a maximum weight of 8kg and maximum screen size of 34". As long as your monitor falls within the shared specifications, it should be able to fit well. secretlab.co/products/magnus-monitor-arm
This looks awesome and I would love this but the Thermaltake Core P6 will not fit in the PC holder without modification and would still raise the minimum desk height by a few inches because the holder doesn't mount flush to the bottom of the desktop, and that is a dealbreaker for me.
Can this support triple monitor set ups? Are you guys considering making triple monitor arm mounts?
The arm mount does not have any specific mounting points. So you could just add a seperate single-arm and mount your third on that.
Space may be a bit of a premium with the non-XL though.
I hope they do akatsuki table design like the chair.
This is how it should have been released last year.
I want it but our set up is white. Any plans for a white desk in the future?
Noiiice!
Can the pc mount be placed on the right side? I don’t like that it covers the side a majority of pc cases use to view and access the inside. I would rather use some of those extra covers and run cables up the right side instead.
Yes, the Secretlab Premium PC Mount will work on either side of your MAGNUS Pro/Pro XL desk.
i had question, can the monitor arm hold my 34inch and 27 inch monitor up and down setup ? because i see the arm doesn't looks long enough for that
Supposedly says it can handle two 34”?
Hey Arma, you can't stack one monitor on top of the other with our arms at the moment but the Secretlab MAGNUS Monitor Arms can hold the dimensions of your monitors, up to 8kg per arm. You can check out more about the Secretlab MAGNUS Pro here to see if the other features suit your needs: secretlab.co/magnuspro
Can you put 2 pcs on the legs? one on each side?
Can a full sized 81key piano fit underneath? Or maybe a piano tray?
Can wheels be added to the legs of the desk?
What kind of lifting mechanism is being used in this table?
I have messaged your twitter handle as well but will ask here...
have a concern about my monitor layout. I have a 49” ultrawide with a 35” above that and a 27” to the left of the 49” two concerns are weight? And depth from monitor to me when mounted, although I need to figure out the Mount and assume I can use any monitor mount on your desks?
how do you attach lights tot he desk and other accessories like microphones ? Ive heard its not really practical.. its hindered me from buying this
What size are those monitors in the video
Even carries the PC as it changes elevation. 😱
I know what I'll be getting with my christmas bonus LOL
So is the rgb lighting included/integrated? or is exclusively an accessoire
The Secretlab MAGRGB™ (Smart Lighting Edition) is sold separately as an add-on accessory for the Secretlab MAGNUS.
What size monitors are shown here?
half tempted to buy this do they ship to the UK?
We do ship the MAGNUS Pro to the UK! Check it out here: secretlab.co.uk/magnuspro
You guys really need an upgrade system I bought the MAGNUS thinking it couldn’t get better now I want the Pro, but I literally just bought the MAGNUS less then a year ago
That's exactly what their business plan is. Constantly make a new product which makes the people with the old version feel they're missing out. They're basically Apple but for gaming furniture.