Hi Jonafar. Remember that in isometrics, dimensions get geometrically distorted. That is why you can't really "measure" in isometrics. However, you can tag and annotate. There is a long list of videos we will create before this one, but if it helps, in the meantime, make sure you LOCK the 3D view before starting annotations.
Hello @jonafar manila, Lock mo yung ISO view mo then click ka mo yung reference set plane mo from ARCHITECTURAL tab kung saan papunta yung Dimension mo then mag dimension kana tapos laruin mo lang yung grip point na lalabas gamit ang TAB sa keyboard para makuha mo yung saktong point.
I found this channel and it has help me out greatly. Thanks . DO you have a tip for connecting 2 different piping systems? Vent piping into sanitary or HWR and HWS connecting at the end of the loop.
Be VERY careful. NEVER connect one system into another directly. Make sure you first put a tee in the system you want to connect into, and THEN extend the other system and connect to the "open port of the tee" =)
Great video! My families of fittings are very poor, dont have that detail in the points where supposed start the pipe, where I can find this families that you use?
I assume you mean "pipe" instead of "duct". But either way: Revit sometimes is a little buggy. Try "trim" from one pipe to the other (make sure you select the side you want to keep). If not, change the order you pick the pipes. Or if not, extend the pipe a little more than required, and exaggerate the drop or rise and try again. Sometimes you have to look for unusual approaches to keep working and not get stuck on Revit little bugs. Good luck!
This channel has been recommended to me so much recently and I dont know why. You're doing something right.
I'm glad to read this!
Hopefully you will find my content valuable and also recommend =)
Thanks for sharing.
You are welcome Cameron.
This video is great. Thank you for the sharing and the tips and tricks
Sure. Stay tuned for more videos =)
Thanks for posting this video. Very helpful!
You are welcome Max. I'm glad you found it helpful. Stay tuned for new videos!
I'm glad you find it useful. If you can review in Google, I would appreciate it =)
great video!
Thanks a lot Larry! Stay tuned for more videos.
Thanks Larry, you can google and review to help the channel =)
i have being on some videos so far your one of the best thank you for sharing
Glad to read Mark. You are welcome.
Thanks Mark. I'm glad you liked it. If you want to leave a nice review in google, it would be very helpful =) Have a nice weekend!
Thank you Alex! Great info in this video.
Glad you found it useful Daniel.
Excellent video, thanks for sharing Bro!
I'm glad you liked it. Spread the word =)
Thank you, this is very helpful
Glad it was helpful!
Glad to hear it helped you. If you can review in Google, I would appreciate it =)
This is gold
I'm glad you find it useful. If you can, I would appreciate a good review in Google =)
Thank you
You are welcome =)
this is exactly what I have been looking for. thank you a thousand times. I recently subscribed to your channel.
Thank you Dmax. Stay tuned for more good stuff =)
I'm glad it helped you. If you can leave a good review in Google, it would be great =)
Great job 👍
Thank you =).
I have more coming soon
hi sir, can teach me how to create a dimension in isometric view...
Hi Jonafar.
Remember that in isometrics, dimensions get geometrically distorted.
That is why you can't really "measure" in isometrics. However, you can tag and annotate.
There is a long list of videos we will create before this one, but if it helps, in the meantime,
make sure you LOCK the 3D view before starting annotations.
Hello @jonafar manila, Lock mo yung ISO view mo then click ka mo yung reference set plane mo from ARCHITECTURAL tab kung saan papunta yung Dimension mo then mag dimension kana tapos laruin mo lang yung grip point na lalabas gamit ang TAB sa keyboard para makuha mo yung saktong point.
You are really great and the confidence you have is the greatest ... thanks and continue
Thank you so much 😀
I found this channel and it has help me out greatly. Thanks . DO you have a tip for connecting 2 different piping systems? Vent piping into sanitary or HWR and HWS connecting at the end of the loop.
Be VERY careful. NEVER connect one system into another directly.
Make sure you first put a tee in the system you want to connect into, and THEN extend the other system and connect to the "open port of the tee" =)
Great video! My families of fittings are very poor, dont have that detail in the points where supposed start the pipe, where I can find this families that you use?
Hi Ricardo.
Info@bimitup.com =)
Thanks Ricardo. Most of the fittings are Autodesk out of the box with slight modifications. Good luck!
Stick it to the Aliens Alex!
You know it Jay ;)
Great but i want non pressure type fitting in revit family rubber type
Hi Fahad. Patrons have priority proposing videos, but will keep in mind. Have a nice weekend
❤❤❤
Glad you liked it =)
Elbow is not appearing when drawing duct.. What to do?
I assume you mean "pipe" instead of "duct". But either way:
Revit sometimes is a little buggy. Try "trim" from one pipe to the other (make sure you select the side you want to keep).
If not, change the order you pick the pipes. Or if not, extend the pipe a little more than required, and exaggerate the drop or rise and try again.
Sometimes you have to look for unusual approaches to keep working and not get stuck on Revit little bugs. Good luck!
@@bimitup Thank you
You are welcome!
Where do those families come from in the directory? Are those from Autodesk?
Yes. Most are out of the box PVC Drainage (DWV) fittings. Good luck! =)
Thanks, this is very helpful
Glad it was helpful!