We had same issue with our dyno. It's the hard drive skipping with the harmonics from certain cars. Switching to SDD completely solved. Love your work guys.
I'm no dyno guy, but i know computers and that's what i was guessing. I was going to say that having the computer in the room next door and the cables thru a hole in the wall would also fix it. But if a SSD is all it takes then I would change it out.
@@colesteven1123 SSD have only just become somewhat affordable in the last couple years... for instance most people still have an SSD/HDD combo in their PC builds.
We dealt with this in the airline industry, Hard drives have major issues with loud noises especially over 130db make sure your system is on solid state, if it's not upgrade it to a ssd and this might help. I do know we would have hard drive failures around loud turbines.
The high db Vibrations could cause the read to bounce is probably what's happening here. SSD's are so cheap. They could always run their system to a NAS that's in another room. But SSD's would simply be cheaper and easier.
I wondered if it wasn't the extreme vibrations,magnetic wave ,and frequency,along with no groundings for the vehicle to platform.?I've noticed visual distortions in some cameras when exposed to such.(Not theirs,but in other's such as mine,without anti-shake).I'm sure their computer is well grounded,but how well are the signal wire shielded?Thnx for any answers.
So since this is a vibration issue with the computer components, would putting the hard drive in another room fix this problem the cheapest and fastest?
@@CatfishAlley Come on man, 50%~ increase NA is impressive, in fact it's more than that because I doubt those motors make 200 @ the wheels from factory. 324whp and they're nowhere near done...
Hey Brent I just wanted to let you know that I find your videos inspirational. I look forward to the upload, because I find it the most uplifting part of my day. Thanks for sharing your stories with us, the PFI family is huge and I'm glad to be a part of it. I hope that someday I can meet you and it is my goal to have you tune a Honda that I've built.
One thing I have always loved is y’all ain’t afraid to show your best friends enjoying some beers making cars go fast but at the same time when comes down to business y’all put everything aside and get to work 110% keep it up guys y’all are what keeps people like us going!!
There's just something about Phongs car that brings back so many memories. I'm an a American muscle guy but back in the mid to late 90s early 2000s we ran rotary engines in our dune buggies and we used to call them Rpm unlimiteds. The sound of an engine screaming at 8 to 12k rpm is unreal and phongs car just brings back all them memories of the parties during Thanksgiving week and the thousands of people with awesome rides and here we were with our yz80s 125s and banshees and rotary powered dune buggies screaming up the dunes what a blast. Then i got married had kids and they took priority. Wouldn't change it for the world though.
You guys have some serious collective knowledge!!!! It's nice to see humble Without the arrogant attitude like many other engine builders and tuners have... WELL DONE GUYS 🍻
Man look here. Phong is one hell of a guy man frfr. You can see the passion when that guy gets down. So precise yet so cautious. Who else you know takes off a Type R valve cover 3 times and still looks brand new. You know when they say “Jack of all trades master off none”. Phone is the Master that jacked allllll trades. #PFI #BoosterBOIZ #PhoneFTW 🔥🔥🚀🚀🤙🤙🔧🔧🖤🖤
PFI Speed just to let you know you guys are one of the only ones I do no skimp through the videos and love all the builds in how you guys give our info
Is it just me that really gets into Phong videos more than others? There really is something about the love and care he puts into his engine that makes it just sound that little bit more special. His car just seems to sing the song of good vibes for car guys. I'm not a honda guy by any means. My hot rod is actually a F150 with a 518 big block. That said this little K series makes me grin ear to fecking ear. keep giving us more Phong content PFI :D
Like you guys mentioned in the last video, watching this All Motor machine on the Dyno is for more exhilarating than a 600+ HP turbo setup. I can't even imagine what it's like in person. Keep up the awesome work and let's go All Motor Phong! get into the 9's!! God bless 🙏
Cover the dyno box with some foam to clean up the runs. We had issues with our dyno not grabbing runs and when we insulated the box it started grabbing every run with no issues.
Hell yeah man I love these videos, Phong puts together some really awesome machines! He really brings you all together whenever he comes around with these things. Keep up the awesome content!!!
you should build a fan out of a vertical ac blower motor with squirrel cage 110v to pump out your exhaust while on dyno. no more crying no opening door just a flip of the switch.
The hard world of tuning NA engines moving Big cams forward and back is so dangerous, you have to really know what your doing, seeing Phong do that delicate job was amazing. Good Work guys! Love all Motor stuff in my favorite channel of TH-cam! Yeahh
When u find yourself a few beers in got pfi on the phone and all motor phong on the tv lol never disappointed watching all these guys over and over you brothers are awesome
Love you guys ALOT. You guys are super wholesome and super down to earth cool dudes. That is what I freaking love about you guys and why I continue to love watching your videos. One of these days I would love to meet you guys in person and give you all a big loving hug. Hope to see you guys soon in Maryland for an event!
When building a high-revvin' engine, dry sum system with scavenge pump is my advice for today. Scavenge pump is able to create a vacuum inside the crank chamber, and therefore pull out all the escaping gasses from the compression chamber. Also dry sump system is easily cooled, can contain as much of oil as needed, and if built properly, can be easily maintained. When using a lot of fuel, especially methanol, the oil gets diluted fast, and then kill the motor.
hell no i love listening to Phong's cars with my headphones, that beautiful NA ROAR, AAAAAAARRRRRRRRRRRRR! keep making amazing NA cars Phong much love and respect
Wooo!!! Great job all you guys but especially Phong. Great build I love seeing your cars and you with your awesome positivity. Can’t wait to see the Phoenix and what you have planned. Great job on the outtro too
Hey Phong, not sure if you read these comments but that CRX is above and beyond! great job you've done. To PFI Speed, you guys are such an amazing inspiration i love it, keep up the AMAZING work
I love your channel, you guys do some nice stuff. I am a self built self tuned boosted CSS b series, all work done in 1 car garage in the suburbs.. my first self teaching was HOW TO DEGREE MY AFTERMARKET CAMS.......RISKY MOVING EM AROUND ON THAT COMP RATIO......
Thank u for everything u do ever since I started watching your channel I fell in love with racing again and just doing it saver and building something I did have my eg civic stolen and it had just a kswap in it but I loved it but I fell out of the game when it got stolen just watching use guys makes me wanna build again I have a shell just waiting on a motor don’t know wat to do yet thank you again for wat use do
Love cars like this. Its easy to strap a turbo or supercharger on an engine, especially large displacement engines. Tuning a 4cyl to make power takes time and talent.
Brent for Fong 324 hp naturally Aspirated Honda on methanol no V-Tech. That’s awesome 😎. I’m amazed to see how much power you can get out of a Honda K-Series and max revving at what 8-9 grand that’s crazy 😜. Brent I enjoy the videos you do. Hope you have a Blessed One Sir. I salute y’all from Silverstreet, South Carolina.
Watching Phong adjust the cams is like watching a virtuoso guitarist change their tunings between songs in 10 seconds. A couple twists of the wrist, and we're on our way!
Great job Phong!!! Maybe try to lengthen the intake runners a little by adding a spacer to help straighten the airflow before it reaches the throttle blades, but otherwise you guys do amazing work
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [Official MV]](http://i.ytimg.com/vi/NBw1jF342vw/mqdefault.jpg)
We had same issue with our dyno. It's the hard drive skipping with the harmonics from certain cars. Switching to SDD completely solved. Love your work guys.
Warwick Evezard +1 .. SSD fixed dyno down here in miami 💪🏻💪🏻
I'm no dyno guy, but i know computers and that's what i was guessing.
I was going to say that having the computer in the room next door and the cables thru a hole in the wall would also fix it.
But if a SSD is all it takes then I would change it out.
Didnt even know people still used HDD
@@colesteven1123 SSD have only just become somewhat affordable in the last couple years... for instance most people still have an SSD/HDD combo in their PC builds.
@@_Professor_Oak i left HDD the same time i ditched 775 socket processors lol
Phong wears ear protection as a fashion statement. I love it
We dealt with this in the airline industry, Hard drives have major issues with loud noises especially over 130db make sure your system is on solid state, if it's not upgrade it to a ssd and this might help. I do know we would have hard drive failures around loud turbines.
Good info there.
That's a really good idea!
The high db Vibrations could cause the read to bounce is probably what's happening here. SSD's are so cheap. They could always run their system to a NAS that's in another room. But SSD's would simply be cheaper and easier.
I wondered if it wasn't the extreme vibrations,magnetic wave ,and frequency,along with no groundings for the vehicle to platform.?I've noticed visual distortions in some cameras when exposed to such.(Not theirs,but in other's such as mine,without anti-shake).I'm sure their computer is well grounded,but how well are the signal wire shielded?Thnx for any answers.
So since this is a vibration issue with the computer components, would putting the hard drive in another room fix this problem the cheapest and fastest?
Phong and Brent are some serious OG’s mad respect to those dudes!
hell yeah!
It goes without saying, if *Phong* is in the Title it's going to be a bad time for headphone users.
I turn it up, love every second when phong's car or phong is on the channle
Its sounds so sick with good headphones though!!! The mic doesnt hold up to the sheer blast its making!!
It's too loud for the PFI microphones lol
Yes sir lol
Ya hahaha for HeadPHONG user! xD Awsome sound, but we want to you guys have a better mic :D
PHONGS OUTRO WAS THE BUISNESS😎.. ALWAYS WITH THE 🔥🔥🔥🔥🔥🔥🔥😃😃😃
I used headphones and pepper spray for an immersive experience
Haha!
I think I speak for the TH-cam world and we want to see more of phong on you’re channel or talk him into creating one.
That is what we want, but is it what Phong wants?
I don't think Phong is that kinda guy, I think he likes a humble life without putting himself out there too much.
that was too sweet at the end with that outro
Phong is the maddest guy, love his knowledge & little tips he shows us when building an engine
sam steeno hell ya phong is the dude brother.
Phong needs a media manager then... Let him focus on what he is good at and follow with the camera...
Phong is an amazing builder/engineer/mechanic. Just a overall humble guy. The dynamic duo
Love Phong's all motor challenges. Amazing he is getting that kind of horsepower.
Taluvian staying away from that coronavirus!
it's on alcohol so yeah it can make some power
Gotta love that M-5
They are maxing out everything and barely hitting 300...I wouldn't exactly call that massave hps...lol
@@CatfishAlley Come on man, 50%~ increase NA is impressive, in fact it's more than that because I doubt those motors make 200 @ the wheels from factory.
324whp and they're nowhere near done...
Hey Brent I just wanted to let you know that I find your videos inspirational. I look forward to the upload, because I find it the most uplifting part of my day. Thanks for sharing your stories with us, the PFI family is huge and I'm glad to be a part of it. I hope that someday I can meet you and it is my goal to have you tune a Honda that I've built.
I love when phongs car hits the dyno
R.I.P. neighbor's quiet afternoon🤣
Always stoked when I see a new PFI upload!
One thing I have always loved is y’all ain’t afraid to show your best friends enjoying some beers making cars go fast but at the same time when comes down to business y’all put everything aside and get to work 110% keep it up guys y’all are what keeps people like us going!!
aye, phong with the modelo in hand, cheers bud!!
YES ! I was about to be bummed in the bum! PFI Fam is super Rad! LET'S GO! 👊🍻🐈🔥🔥🔥🔥🔥🔥
Smashing that like button before the videos even playing. Keep up the great work!!
There's just something about Phongs car that brings back so many memories. I'm an a American muscle guy but back in the mid to late 90s early 2000s we ran rotary engines in our dune buggies and we used to call them Rpm unlimiteds. The sound of an engine screaming at 8 to 12k rpm is unreal and phongs car just brings back all them memories of the parties during Thanksgiving week and the thousands of people with awesome rides and here we were with our yz80s 125s and banshees and rotary powered dune buggies screaming up the dunes what a blast. Then i got married had kids and they took priority. Wouldn't change it for the world though.
You guys have some serious collective knowledge!!!!
It's nice to see humble Without the arrogant attitude like many other engine builders and tuners have...
WELL DONE GUYS 🍻
Hell yeah pfi late night upload I love it. Let's go!
I’ve been waiting for this video for a minute now
Approximately 3089 minutes actually, if we're counting since the most recent video two days ago.
D A that’s impressive
Lol a nice loud all motor car is the most exciting!!!
Christian De Vos damn straight
Man look here. Phong is one hell of a guy man frfr. You can see the passion when that guy gets down. So precise yet so cautious. Who else you know takes off a Type R valve cover 3 times and still looks brand new. You know when they say “Jack of all trades master off none”. Phone is the Master that jacked allllll trades. #PFI #BoosterBOIZ #PhoneFTW
🔥🔥🚀🚀🤙🤙🔧🔧🖤🖤
Gotta love it when Phong's engine takes it from a roar to a scream! Bet the static energy in that building was unreal!
PFI Speed just to let you know you guys are one of the only ones I do no skimp through the videos and love all the builds in how you guys give our info
Is it just me that really gets into Phong videos more than others? There really is something about the love and care he puts into his engine that makes it just sound that little bit more special. His car just seems to sing the song of good vibes for car guys. I'm not a honda guy by any means. My hot rod is actually a F150 with a 518 big block. That said this little K series makes me grin ear to fecking ear. keep giving us more Phong content PFI :D
Almost 100hp per cylinder without a power adder is awesome ...phong 💪
You guys need to get Am phong to start a youtube series guys he's such a smart and positive dude and his builds are pretty radd
Like you guys mentioned in the last video, watching this All Motor machine on the Dyno is for more exhilarating than a 600+ HP turbo setup. I can't even imagine what it's like in person. Keep up the awesome work and let's go All Motor Phong! get into the 9's!! God bless 🙏
Cover the dyno box with some foam to clean up the runs. We had issues with our dyno not grabbing runs and when we insulated the box it started grabbing every run with no issues.
love hearing that Vtech Sing like a bird in the morning baby!!! Sweet ass ride Phong !!! Love that CRX!
12:27am in grand rapids, michigan and pfi drops a phong video, I think yes!!!
Hell yeah man I love these videos, Phong puts together some really awesome machines! He really brings you all together whenever he comes around with these things. Keep up the awesome content!!!
you should build a fan out of a vertical ac blower motor with squirrel cage 110v to pump out your exhaust while on dyno. no more crying no opening door just a flip of the switch.
Thing will be in the 9’s for sure ! IPG parts built a all motor crx and man I’m happy to see another. Can’t beat that all motor feeling man.
The hard world of tuning NA engines moving Big cams forward and back is so dangerous, you have to really know what your doing, seeing Phong do that delicate job was amazing. Good Work guys! Love all Motor stuff in my favorite channel of TH-cam! Yeahh
I love the all motor stuff. Thats what I do. I enjoy watching phongs dino pulls. It's great. Keep up the great work!!!!👍
Please please please have Phong do the outro's to all videos from now on...... He is honestly to humble to be human.
When u find yourself a few beers in got pfi on the phone and all motor phong on the tv lol never disappointed watching all these guys over and over you brothers are awesome
Gotta love Phong. He is so chill.
Phong is such a cooler dude and man is he smart with the crazy shitnhencomea up with. Id love to watch more of his work and learn myself.
Phong is awesome! Lots of hard work in that car! Love the retakes!
Love you guys ALOT. You guys are super wholesome and super down to earth cool dudes. That is what I freaking love about you guys and why I continue to love watching your videos. One of these days I would love to meet you guys in person and give you all a big loving hug. Hope to see you guys soon in Maryland for an event!
I would like to have a job with people like you guy that always teach new things and love cars, nice videos!!
phong is the definition of all motor dreams! respect !
When building a high-revvin' engine, dry sum system with scavenge pump is my advice for today. Scavenge pump is able to create a vacuum inside the crank chamber, and therefore pull out all the escaping gasses from the compression chamber. Also dry sump system is easily cooled, can contain as much of oil as needed, and if built properly, can be easily maintained. When using a lot of fuel, especially methanol, the oil gets diluted fast, and then kill the motor.
hell no i love listening to Phong's cars with my headphones, that beautiful NA ROAR, AAAAAAARRRRRRRRRRRRR! keep making amazing NA cars Phong much love and respect
After the adjustment to the cams the car sounds so much better. Like it its about give that sauce to someone!!!
Phong and Brent i seriously love to see you two together and killing it usual! cant wait for part 3. Have fun this weekend in Texas!
Phong killz it always.....even the vlogging not bad, the first outro was good enough Brent was just getting payback.
That thing is a monster! And could be built by by a better team. Y'all's energy is always so great and y'all just feed off one another.
Wooo!!! Great job all you guys but especially Phong. Great build I love seeing your cars and you with your awesome positivity. Can’t wait to see the Phoenix and what you have planned. Great job on the outtro too
As always a joy to watch. Thanks guys and thanks to Master Phong.
Wouw that k sounds beautiful, and the hunger of the engine to greave form just awsome👌
Gotta love Phong and it’s always great when you don’t edit out the retakes and bloopers!
Back in the day when I used to run my at GSR. All motor I did + 3 on the intake -1 on the exhaust and made a huge difference down low.
Love the fire ball cuts hell yeah!
Phong"s The MaN as alway's killin It Can't wait 2 see Some action from Cleetus and CaRs HELL YEAHH !!!
Hey Phong, not sure if you read these comments but that CRX is above and beyond! great job you've done.
To PFI Speed, you guys are such an amazing inspiration i love it, keep up the AMAZING work
I love your channel, you guys do some nice stuff. I am a self built self tuned boosted CSS b series, all work done in 1 car garage in the suburbs.. my first self teaching was HOW TO DEGREE MY AFTERMARKET CAMS.......RISKY MOVING EM AROUND ON THAT COMP RATIO......
Brent is such an inspiration staying cool even when things get frustrating!!
I know you mentioned sound proofing the dyno area some more. You could do the same for the pc, pad and isolate it inside and out within a box.
Thank u for everything u do ever since I started watching your channel I fell in love with racing again and just doing it saver and building something I did have my eg civic stolen and it had just a kswap in it but I loved it but I fell out of the game when it got stolen just watching use guys makes me wanna build again I have a shell just waiting on a motor don’t know wat to do yet thank you again for wat use do
PFI.. making engines smile since 1995 haha 👍
Love cars like this. Its easy to strap a turbo or supercharger on an engine, especially large displacement engines. Tuning a 4cyl to make power takes time and talent.
Phong did a great outro...
Xo loves to all...legends...
Its sounds so good great job phong. WE NEED PHONG TO DO A PULL IN RUBY or at least ride along.
No turbo, no problem, it's Phong time!
Phong is so humble
Love that guy
Phongs engine is so clean
All motor phong song. Sounds so epic just rippin
Love all the moments you choose to leave in. Feels authentic. Good luck this weekend. 🤙🏻
Brent for Fong 324 hp naturally Aspirated Honda on methanol no V-Tech. That’s awesome 😎. I’m amazed to see how much power you can get out of a Honda K-Series and max revving at what 8-9 grand that’s crazy 😜. Brent I enjoy the videos you do. Hope you have a Blessed One Sir. I salute y’all from Silverstreet, South Carolina.
this work of art is gonna be a beast, cannot wait to see some track et's
Damn, that thing is crazy. Looking forward to seeing the runs from this coming weekend, couldn’t believe how quick it was last time 🤙
Last rip sounded so clean
That is some serious noise! That DB reading must be crazy.
Phong is the man! I wish I could get my b-series head done by him.lol Just so I can say mine was built by Phong.💪💪
The car is a beast phong can't wait til the next build brother hell yea
Time for tea and crumpets yo!
Love the custom metal bracket to hold the...Gatorade bottle catch can. haha
God I love Phong's builds.🔥🔥🔥🔥🔥🔥🔥🔥
Awesome!!! Love watching all the positive content. KEEP IT GOING 👍👍👍
Beers and working on cars.. perfect combo👍
That Phong, that Phong Pha-Phong Phong Phong... (Cisco voice...)
Watching Phong adjust the cams is like watching a virtuoso guitarist change their tunings between songs in 10 seconds. A couple twists of the wrist, and we're on our way!
1:46 no ear protection taking it straight to the head. Phongs song is romantic AF
Nice work guys, can't wait to see her run!
Phong and Brent are Legends!!!
Phong hitting us with a Johnny Dang; YESSSIR !
I just love this car . Hell yeah good job guys
Sick! Can't wait to see him get it all figured out and break 400!
Great job Phong!!! Maybe try to lengthen the intake runners a little by adding a spacer to help straighten the airflow before it reaches the throttle blades, but otherwise you guys do amazing work
Cant wait to see the cams degree'd to spec and the jam its gonna make then.
That british dude needs to move to the states
U can tell he loves it
I waited all day for this thank you
I love how much fun y’all have
Hell yeah brother i love phongs song 😎
Love the videos wish you guys the best of luck and it looks like phong made himself a monster.
i've turbo'd before, but damn N/A is something else in it's own class, i wanna rebuild one now
Best outro in the history of youtubes. Hell yeah Phong good luck at c&c