It was a very good video, adding English voice make it even more effective well done my Friend🙌🙂 Do you measure how long it takes to reach 6 Bar, because I also want to do a similar project.
Thanks for the positive comment bro. It depends on the power of the compressor. Mine has medium power and raises the pressure to 6 in about 4 minutes. 👌☺️🍀
Hi Sir What is the brand of the pressure cut off switch you used? It is really quiet as it just “clicks” when it cuts off instead of the usual ones that let off a loud “pssst”.
Very good. It will serve as a guide for me to build my compressor. If you were using threadlocker, I think you used too much. It will be very difficult to remove if any repairs have to be made.
I'm looking to make something similar w having asmall quiet compressor a few different yet. Like back pressure in the compressor. And oil coming out of it whem pumping. I like the filter in the inlet side I was hoping to see how I could get the oil for cooling the motorthat pushes out with the air to collect and loop back to the inlet side. Kind of how it's done on it's original form? Looks good though otherwise. I'll keep searching.
You shouldnt have oil being pumped out. Look for the data sheet for the compressor model and it will tell you how much oil it needs. Replace the original oil with Shell Tellus 68 or an equivalent non-foaming hydraulic oil. Use a 50% duty cycle and never let the compressor exceed 100 deg C .
For all that time effort and money you could have e just bought a used one for $30. And it won't blow because of crappy welds. But you have fun with your projects
It was a very good video, adding English voice make it even more effective well done my Friend🙌🙂
Do you measure how long it takes to reach 6 Bar, because I also want to do a similar project.
Thanks for the positive comment bro. It depends on the power of the compressor. Mine has medium power and raises the pressure to 6 in about 4 minutes. 👌☺️🍀
Really like the idea of a silent air compressor, mine are so noisy I dislike using them. Your videos amaze me.
Thanks mate, I hope my videos are helpful. 🙏🍀☺️
Very good idea my friend 👍🙂🙂
Thanks mate👌🍀🍀🙏☺️☺️
Hi Sir
What is the brand of the pressure cut off switch you used? It is really quiet as it just “clicks” when it cuts off instead of the usual ones that let off a loud “pssst”.
That’s creative really nice job 👍 merry Christmas 🎄🎁
Merry Christmas to you too, my friend. Thanks for the comment🍀☺️👌
Parabéns pela sabedoria que você está ensinando muita gente gostei muito abraço pra você amigo
Nice
Thanks brother ☺️👌🍀🍀🍀🙏
Muy bueno, mis felicitaciones.
Wie lange braucht der kompressor bis er von leer auf voll abschaltet ?
Very good. It will serve as a guide for me to build my compressor. If you were using threadlocker, I think you used too much. It will be very difficult to remove if any repairs have to be made.
I'm looking to make something similar w having asmall quiet compressor a few different yet. Like back pressure in the compressor. And oil coming out of it whem pumping. I like the filter in the inlet side I was hoping to see how I could get the oil for cooling the motorthat pushes out with the air to collect and loop back to the inlet side. Kind of how it's done on it's original form? Looks good though otherwise. I'll keep searching.
You shouldnt have oil being pumped out. Look for the data sheet for the compressor model and it will tell you how much oil it needs. Replace the original oil with Shell Tellus 68 or an equivalent non-foaming hydraulic oil. Use a 50% duty cycle and never let the compressor exceed 100 deg C .
Good Video & well thought out build 👍👍👍👍👍👍👍
Thanks brother 🙏🍀🍀☺️
Very nice! I really like your work!
Θα πρέπει να συμπληρώνεις τακτικά λάδι στο μοτέρ για να μη καεί .( Είχα φτιάξει ένα παρόμοιο με τρία μοτέρ )
❤❤❤❤
Этот мотор не запустится. Пока в баллоне есть пару АТМ
29:52 POXIPOL from argentina or Uruguay !!!
You should be wearing some gloves when applying that paint remover.
For all that time effort and money you could have e just bought a used one for $30. And it won't blow because of crappy welds. But you have fun with your projects
Where the weld needs to be strong, it is strong. I have a lot of parts, almost nothing I spent on this project.
OKขอบคุณสิ่งที่น่ารู้ครับผมสวัสดีครับผม
И чем же пендосовский язык лучше родного? Говори по русски и люди тебя поймут
Im not russian 😁🤷🏻♂️