Making a Simple Air Compressor Using Gas Bottle and Fridge Compressor - DIY Air Compressor Machine
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2023
- Making a Simple Air Compressor Using Gas Bottle and Fridge Compressor - DIY Air Compressor Machine
I hope you have fun with the video! If you have any questions on the used tools, materials or the processes, write it in the comment section - i´ll try to answer as soon as possible!
If you want to support my channel hit the like, leave a comment, subscribe and share my work. It helps a lot! :-)
Thanks for watching! Please subscribe to support my channel.
I hope you like it!
If you like it please Subscribe: bit.ly/3EaCNEI
#aircompressor #diyaircompressor #diy #dtrestoration #restoration - วิทยาศาสตร์และเทคโนโลยี
Second question: why you have divided gas bottle in two parts and then rejoin them by welding?
No questions asked, Yoda at work... Young jedi no need to understand. Learn you must.
The force is clearly with that guy. A TRUE PLEASURE watching that old-school mecqnic/electrician work. This is real kraftsman ship at work. Somthing that has been lost over time.
Thank you for allowing me to whites this.
Why cut the tank and then weld it again, I don't understand
They are checking for cracks that could cause the tank to explode u notice the tank is quite rusty he may have been wanting to see if the rust has eaten through the metal
Agreed. Simpler to do a pressure test in safe conditions. Some decent compressors and air tanks to be found on junked trucks.
Why not buy a bit more decent tank, saves a lot of time and work...
Well i see you dont understand the economy of most of the world news flash the world is broke and crap is getting even more expensive more news at 11
This is a good practice, to make sure can remove all sludge, carbon etc.
A cheap welding mask/face shield wouldn't go amiss! 😎
Hai Good Evening Super video Se inside all parts And Re fitting s super you are very Hard working super finishing iron Reasting and pant ing you have very knowledge All Tools God bless you and your family 👍👍👍👌👌❤️🌹
Не надо слушать глупые советы,надо слушать себя,свой опыт.Молодец!!!
Техника безопасности на высоте! Сварка без маски, песок в глазах. Ожог обеспечен и для рук. Идея не новая, а в целом браво!
احسنت . اختراع و ابتكار جميل وسهل . بالتوفيق صديقي . تحيات اخوك من الجزائر .
I agree that's what I can work out white covered in half then welded back again if he's going making a Presser out of it do you want to make sure there's no pinholes❤😢😢😂
I congratulate you, you know that recycling is really always successful.. greetings
Third question: it should be better testing of motor unit before closure by welding. Why not?
I have a couple questions, what’s the ( c f m) and the pressure ?
Hi nice job but you don’t have eyes protection you should use a mask
All of all for that Justice chippy on buy one of these days it's gonna be small😂❤
11:09 You know those kids are staring straight into that welder haha
Perfect 👌
Nice job but you should seriously consider getting a welding helmet, also what is with the spot welding, just turn down the power and do one weld run, this would make the welding stronger and more reliable, if you’re welding machine only has one setting then increase the length of the power line between the machine and the torch this should increase the resistance and decrease the power of the welding rod. Keep up the good work and I’m looking forward to your next video
That metal is too thin for a full continuous weld.
Rien à dire, juste bravo et merci, car très bien détaillé 👍🏻👍🏻
Grande profissional, parabéns.
Good job 👏👏👏🌹🌼🍀🇮🇶🇮🇶🌹🍀🍀🌹🌼🌺
Well done my friend, from, Bayamo, Cuba,your again a Genius
Oh, thank you. Great video, you did a great job, a new invention💪
ابتكار جميل ويستحق التقدير ❤😊
احسنت اتمنا من الله اني يوفقك انت محترف احسنت❤
Good working
ผมก็สงสัยว่าผ่าถังทำไม ทั้งสองถังแล้วประกอบใหม่
and what happened to the repaired compressor? at min 36:51 it's a completely different compressor 🤔🤔. can be recognized by the weld seam, the dent in the cover and the electrical connection....
Parabens ,,,, daquela coisa orrivel ,o SR fez essa marvihosa maquina , e so nota 1000. Mesmo .kkk ,Deus Abençoe muito seu trabalho 🎉❤🎉🎉
جميل لديك خبرات كثيرة
Esse camarada é o famoso professor Pardal até os óculos.😂😂😂
Moy buen video saludos abrazo grande desde Argentina 👍🤗
That looked like alot of fun!
Boa tarde, aqui no Brasil não abrimos o tambor de gás Frigem para transformar em receptáculo de compressor de ar ,simplesmente sacamos à válvula lavamos e continuamos o processo. 😮
ขอบคุณมากครับกับสาระดีๆ
Bravo ! Beau travail (nice work) 👏
So much beautiful and like 🙏🙏🙏🙏🙏🙏🙏👌👌👌👌👌👌👍👍👍👍
Excelente!!! Mi estimado .mucho que aprender de usted.
Vou copiar seu projeto 😁
Good job but really dangerous. Every gas bottle, even if it's empty, has some residual gas adsorbed in the interior surface. So is very very dangerous cutting the bottle with methods requiring a hot spot. The bottle could explode. If you need cutting, gas bottle must contain water.
В финале компрессор другой.
Фреоновое масло будет активно выносится в ресивер и попадать с воздухом на окрашиваемые изделия. Нужен маслоотделитель и возврат масла в картер компрессора.
المشكل في الضاغض لانه سيتعرض الى الاحتراق بفعل الماء كيف الضاغط يمتص الهواء وهدا الهواء فيه نسبة من الرطوبة اي عندما يضغط الكباس على الهواء تتكون قطرات من الماء فتختلط بالزيت فمع المدة يصبح لدينا الماء والزيت فيتلف الضاغط.
The fridge compressor is not the same with the first. He just painted it but he does not use it
.😅
Your right! the dent in the top is to the left of the power intake and in the one he works on its a different dent and its to the right. Well spotted.
Excelente vídeo, perfeito obrigado. Grima Rj
What sand blasting doses . What it do ?
👍👍👍👍👏👏👏👏. Bom
❤❤❤
הרבה מאד עבודה
Дураков работа любит😂
Tré bravou10/10
Excelente vídeo
por que você dividiu o botijão em dois e depois soldou novamente?
Muito bom
Parabéns 👏
А зачем баллон разрезал? Чтобы потом сварить?
Good work😊
Einfach öl in den Kanal spühlen super
Up ❤❤❤❤❤❤❤❤❤
What was the point of cutting the tank in half just to weld it back together? Makes no sense.
111111
Probably to make sure it was empty, also it was sand blasted and rusty, you don't want to blowing apart.
More chance of it blowing apart now, after welding it.
they cut for sure it clean to avoid rust stuck the piston and they call recondetion,fill new oil10 its normal have oil inside to smoth bearing inside
when you make compressor tank you need to insure that the tank doesn't have cranks or rust inside that may cause the tank to explode.
Nice job!
Good Job
Para que lo abre y después vuelve a soldar, el freon es inflamable?
Why did you change the Compressor did the original not work ?
I was thinking the same thing😮
Muito bom parabéns use máscara na ora de soldar por favor.
Very good WORK......But put GLOVES..,!
Muy buen travajo muy profesional pero no tiene cuidado con utilizar los equipo de protección soldar sin máscara usar la amoblados sin guarda mi guantes ni lentes 👌🤦♂️🤷♂️🇵🇦🙋♂️
אצלנו בישראל אם קומפרסור אוויר מיתקלקל זורקים הרבה כאלה יותר קל לתקן משומש מאשר לייצר מחלקים
👍
Компрессор другой поставил.😂😂😂
Parabens ,,,daquele feio o SR fez essa arailh
He needs a Mig welder!
אבל יפה מאד
عمل جيد ، أنت بارع تستحق التحية .
Hi DT can you finish the UAZ project waiting so long maybe will pop up ,but nothing thank you
Para sa kin.... Tangke Lang ng freon.... Kabitan ko ng gauge at labasan ng hangin...bili ako NG electric na pambomba ng tire Para pangkarga ng hangin... Di ba ganun Lang ka simple Un?
Maravilhoso, mas muito perigoso por não usar nenhum equipamento de proteção
Pero él pudo haberse conseguido un tanque nuevo. 🤔🫣
Пособие по тому, как делать не надо!
👌
very nice
لماذا قصية الاصتونه وعودة لحمتها
Bizarre ! Pourquoi il a coupé le récipient en deux et juste après il les a soudés . Est ce que pour nettoyer l'intérieur ?
Quelqu'un m'explique .
Qabın köhne lehimine güvenmediyi uçun Kəsib yeni lehim vururku sızdırmasın
Pq cortou ao meio se vai soldar novamente?
👍👍🎉
Sar ek mere liye bhi banaa do main Delhi se hun sar
Sorry, but i don`t get it, why you first cut it in half and then weld it together?
my question 2 great mines think alike
It's a ticking time bomb waiting to explode. It would be bad enough to use a rusted out tank as a pressure vessel, but cutting it in half and throwing welds all over it is just begging to explode.
That was my first thought to, only one word to describe this, Dodgy !
Muy bueno yo le pondría una valvula antiretorno entre el motor y el tanque así arranca liviano el motor
Very nice work 🎉🎉🎉
Composer cutting sa pahla oil nikal lena cahiya thaa. Accidents ka chance ho sakta ha. Aag bhi lag sakti ha.
How to build a bomb:
A nice example how not to weld, no safety materials at all 😮
нае бщ ик. вместо ржавого компрессора поставил другой новый. по покраске и шву видно 👎
Lo felicito, pero tienes que emplear las medidas de seguridad
आपली दुकान कुठे आहे.
Lo único que no me gusta que esté señor no usa ninguna protección, ni para soldar, ni en sus manos ni ropa especial para el trabajo
Tengo uno delos mismos compresores el motor tira el aceite al tanque de aire sale por la manguera
n usou o mesmo motor q foi estaurado mas ta valendo
Why would you cut the tank in half just to weld it again , 😂😂
I don’t understand the no glove and at least some shade of lens. That’s almost funny tacking without a hood. MiG is easy enough to do a few tacks. But tacking without a hood with a stick welder is nuts. Nothing to block the welding glare isn’t safe at all. But it’s not my business to say, even though I did. I’m starting to wonder if he is blind or maybe he has number ten shade contact lenses in his eyes. I mean nice job but it’s really ridiculous to not use a hood. It’s the craziest thing. lol.
एअर काॅम्प्रेंशरची किंमत किती आहे.
🎉🎉🎉🎉🎉🎉❤❤❤❤❤
who needs welding masks when you have slow closing eyelids
😂😂👍
tamamda ilk başta neden ikiye böldün
Also no eye protection