THANK you for going step-by-step, at a slow pace, so novices can actually follow what you're doing. I tried to watch other videos but they failed to describe steps they assumed the viewer was already familiar with. But your video enabled me to actually use the loader correctly. Great job!
I tired of loading my mags without a loader...so i decided to buy one of these, i got mine home and i was staring at and going "WTH"....then i watched your video and i'm loading quicker than ever before. Thanks for the How To vid.
As a newbie into gun world at 66 years old I still have problems loading mags by hand. I believe its all about technique not strength so the Uplula is my go to. But I want to master it. Just like shooting my SW 9mm Compact for the first time today at 10 yards I hit the 10×14 target, but not one good grouping. Practice makes perfect I hope.
Awesome Video... NOTE: The instructions recommend on-loading the first round into the magazine by hand, then loading the remaining rounds with the UPLULA to avoid scratching the follower with the metal beak/ramp on the Uplula. Another feature is the magazine off-loading tool designed onto the side where the ring is on the speedloader...
To late, I did scratch the hell of it and is very noticeable. Be careful my mistake for rushing and not paying attention to details. Nevertheless, awesome magazine speed loader that makes loading bullets very simple and effortless with no pain involved!
I’ve been using mine for 8 or 10 years, and have literally never done this. And I have no signs of any damage or scratching of my followers. For those who are wondering about this.
Finally found a review of how the Maglula works!!! All the other reviews were so difficult to understand, perhaps because the reviewers watched were guilty of assuming all the folks who viewed the videos prior knowledge.
That little key ring is for holding the single stack mags clip on adapter. It’s a little U shaped clip that clips onto the bottom so you can use it easier for .45 SCP mags. It centers the single stack mags.
Thank you sooooo much for the step-by-step, slow tutorial! I was lost until I watched this and loaded my magazine at the same time as you loaded yours.
I've got two of these. One stays in my shooting bag all the time. I bought the orange ones because they are bright enough to make them hard to miss if I put one down someplace where it might be overlooked and forgoten. These things save alot of hurt on my old arthritic fingers. Great little product !
Thank you so much. Your video for this UpLULA mag loader is the best. I've just bought it and there is no need to read their instructions on the package. U R right! It's very simple to use because of your video.
100,000 up votes! You explained this in such a way that even I understood! I've searched and watched a number of videos on how to use this speed loader and yours is the only one that showed in detail and the BEST one on the Internet! I can't tell you how frustrated I was trying to figure out how to use this tool. You're the best and I cannot thank you enough! Cheers and stay safe! MAGA
Thanks for showing how to use it. Bought my at Academy for $35.00, but let me tell you it makes loading bullets so simple, unbelievably crazy simple. I used it on a Smith & Wesson CSX 9mm magazine because my this handgun purchase did not come with a magazine speed loader, so at first I used my hand to load 12 + 10 bullets into two different magazines. This was crazy hard and painful. When I try to use the UpLula, I was not sure how to use it, so I watched this video and immediately I got the hang of it, so tried and loaded one magazine in less than one minute, unbelievable simple and pain free. Again thanks for this video.
BY far the best video on how to use the uploader, I watched other video's and they went way too fast for me. Maybe I'am just slow, but after watching this video I got it. Thanks
Hello, thank you for the step-by-step instructions. I am very impressed with the little Uplula accessory. I use it for a Para Ordnance P14-45ACP and for the first time I can load 14 bullets without breaking my fingers. 😄👍 Greetings from Germany 🇩🇪
Thank you so much for this demonstration of this 9 mm loader because the instructions weren’t very clear in my book but thank you again it’s been a great help now I can do it easily.
I just started using these, they really are great. I found that sometimes the little notch that pushes the rounds down will pull the top one forward a bit when you release it. Keeping a finger on the top round keeps it in place and doesn't really slow anything down. Also, there's a printed icon of a bullet cartridge on the top, indicating which direction it should be facing when you're loading.
That would be great for granny's like me I go to the range I have a hard time loading my Glock magazine. My Ruger Max is just fine. I would love to get one of that Maglula mag loader. Thanks kiddo. Love your videos.
I just purchased one today not knowing anything about them and the gun store recommended that particular one for 9 mm he demonstrated for me but when I got home I had no instructions he gave me one that he had in the store he didn't have the rapper anyway when I got home I forgot what he said and what he demonstrated so I had a hell of a time trying to figure it out and could not so then I Googled it it came up with this and now I understand 100% great demonstration and now I can sleep tonight.
I have a .380 and a 9mm. I knew this would work with the 9 but wasn't certain whether it would work with the .380. Had no issues. One thing you missed is on the back side is an unloader which works really well.
I have two of the older loaders and you always had to keep the mag straight. The new unit has a mag "guide" that centers the magazine. No more need to hold the loader in the center. GREAT !
Excellent video, thank you! The instructions that came with the UpLULA speed loader SUCK ROCKS! You video cleared it up perfectly. IMO, the Glock speed loader sux. The UpLULA is great! Hand loading 9mm or less is easy, and I'm 62 yrs old. 10mm is alot more challenging, especially loading the last 3 rounds or so. I use the UpLULA to load my 10mm rounds and it works great1 Very easy to use
I just got mine today and I love it, my 9mm magazine is a son of a GUN to load. With this thing, it is a breeze to load. I have looked at other loaders and in most of them you have to load the first bullet yourself but this one will load first to last.
It came with the firearm I purchased from a pawn shop it is a CZP07 came with three mags a holster and there was an uplula loader in there as well it is by far the best loader that I have.
The ring is for the gray plastic single stack adapter that you can purchase separately. I bought it for my 1911 .45 acp. The adapter snaps on the bottom to keep a single stack magazine from wobbling as your loading up and it has a hole for the ring to keep it with the device when needed. Or you can keep it on the bottom while still attached to the key ring hole.
Some of the local gun ranges now include one of these in each bay. Of course they are attached to the wall via a cable/chain so people don't walk off with them. Been using one for quite a few years.
After many years of not using a mag loader, I have finally met my match with the P365 magazine. Great video, and think I’m gonna pick this one up. And why can’t handgun magazines be like AR/AK style where you just push a bullet straight down - lol
I could not load more than a few rounds in the 30 round magazines for the Keltec 22WMR rifle. I can now load 30 rounds in the magazines with an Magula loader. I bought two of them in case I loose or break one.
My method: Using the left hand, wrap the index finger over the hoop on top, three remaining fingers around the back, thumb around the front. Squeeze with the thumb, then push down with the index finger. Drop in the round. Release. Repeat. Works well with 17-round mags.
Great video. I noticed you didn't use the small protruding "tooth" on the other side of your Updula when unloading a few rounds from your double stack mag (around 5:35).
I am having trouble finding this item on Amazon or another website. Do you have a link for this " 9mm Maglula UpLULA Universal Pistol Magazine Speed Loader?" Thanks in advance
THANK you for going step-by-step, at a slow pace, so novices can actually follow what you're doing. I tried to watch other videos but they failed to describe steps they assumed the viewer was already familiar with. But your video enabled me to actually use the loader correctly. Great job!
Thanks for watching!
I tired of loading my mags without a loader...so i decided to buy one of these, i got mine home and i was staring at and going "WTH"....then i watched your video and i'm loading quicker than ever before. Thanks for the How To vid.
Thanks for watching!
@@DuncanMeter0:36
As a newbie into gun world at 66 years old I still have problems loading mags by hand. I believe its all about technique not strength so the Uplula is my go to. But I want to master it. Just like shooting my SW 9mm Compact for the first time today at 10 yards I hit the 10×14 target, but not one good grouping. Practice makes perfect I hope.
Hi there, where I can buy this? Thanks and appreciate it 😊
@@vbucaneg Most guns stores carry them. Also, any of the online retailers but Amazon only has the knock-offs.
There is no doubt that, this the best video for using the Uplula I have ever seen and how to use.
Thanks for watching!
Awesome Video... NOTE: The instructions recommend on-loading the first round into the magazine by hand, then loading the remaining rounds with the UPLULA to avoid scratching the follower with the metal beak/ramp on the Uplula. Another feature is the magazine off-loading tool designed onto the side where the ring is on the speedloader...
Thanks for watching!
To late, I did scratch the hell of it and is very noticeable. Be careful my mistake for rushing and not paying attention to details. Nevertheless, awesome magazine speed loader that makes loading bullets very simple and effortless with no pain involved!
I’ve been using this for a couple of years and never knew this but it makes a lot of sense. I’ll definitely manually load the first round from now on
I’ve been using mine for 8 or 10 years, and have literally never done this. And I have no signs of any damage or scratching of my followers.
For those who are wondering about this.
Finally found a review of how the Maglula works!!!
All the other reviews were so difficult to understand, perhaps because the reviewers watched were guilty of assuming all the folks who viewed the videos prior knowledge.
Thanks for watching and thank you very much for the support! Very appreciated!
I appreciate your video how calmly you explained the process. Now, I will be better at the range. Thank you so much!
Thanks for watching! Check out some of my other videos which you may find helpful.
That little key ring is for holding the single stack mags clip on adapter. It’s a little U shaped clip that clips onto the bottom so you can use it easier for .45 SCP mags. It centers the single stack mags.
Thank you sooooo much for the step-by-step, slow tutorial! I was lost until I watched this and loaded my magazine at the same time as you loaded yours.
Thanks for watching!
I've got two of these. One stays in my shooting bag all the time. I bought the orange ones because they are bright enough to make them hard to miss if I put one down someplace where it might be overlooked and forgoten. These things save alot of hurt on my old arthritic fingers. Great little product !
Thanks for watching!
You were the best at describing the speed loader. Other channels were awful!
Thanks for watching!
Had one for years, they are so great!
They’re super helpful! Thanks for watching!
Thank you so much. Your video for this UpLULA mag loader is the best.
I've just bought it and there is no need to read their instructions on the package.
U R right! It's very simple to use because of your video.
Thanks for watching and glad it was helpful! Check out some of my other videos, which you might find useful as well.
100,000 up votes!
You explained this in such a way that even I understood!
I've searched and watched a number of videos on how to use this speed loader and yours is the only one that showed in detail and the BEST one on the Internet!
I can't tell you how frustrated I was trying to figure out how to use this tool.
You're the best and I cannot thank you enough!
Cheers and stay safe!
MAGA
Thank you! And thanks for watching!! 🇺🇸
I'm a newbie and this came with my new Equalizer - love it! Thank you for the video.
Glad it was helpful!
Thanks for showing how to use it. Bought my at Academy for $35.00, but let me tell you it makes loading bullets so simple, unbelievably crazy simple. I used it on a Smith & Wesson CSX 9mm magazine because my this handgun purchase did not come with a magazine speed loader, so at first I used my hand to load 12 + 10 bullets into two different magazines. This was crazy hard and painful. When I try to use the UpLula, I was not sure how to use it, so I watched this video and immediately I got the hang of it, so tried and loaded one magazine in less than one minute, unbelievable simple and pain free. Again thanks for this video.
Thanks for watching!
I have the Sig P365xl and this loader worked amazing - SIG’s magazine is super tight so this loader made it super easy..
Thanks for watching!
Agreed, I have the same gun and this loader works great.
BY far the best video on how to use the uploader, I watched other video's and they went way too fast for me. Maybe I'am just slow, but after watching this video I got it. Thanks
You're welcome!
Hello, thank you for the step-by-step instructions. I am very impressed with the little Uplula accessory. I use it for a Para Ordnance P14-45ACP and for the first time I can load 14 bullets without breaking my fingers. 😄👍
Greetings from Germany 🇩🇪
Thanks for watching!
Butter smooth after you work through the resistance (new magazine). Great job on this tutorial! Thank you.
Thanks for watching!
Thank you so much for this demonstration of this 9 mm loader because the instructions weren’t very clear in my book but thank you again it’s been a great help now I can do it easily.
You are very welcome
I just started using these, they really are great. I found that sometimes the little notch that pushes the rounds down will pull the top one forward a bit when you release it. Keeping a finger on the top round keeps it in place and doesn't really slow anything down. Also, there's a printed icon of a bullet cartridge on the top, indicating which direction it should be facing when you're loading.
Thanks for watching!
Really enjoyed how you explained the Uplulu. Following you now.
Awesome, thank you!
Thanks for this, I have difficulty following written directions and diagrams so your video is perfect for people like me, if there are any.
Thanks for watching!
Helpful for me. Worth what u pay for! Thanks for sharing..
Glad it was helpful!
I had bought one of these devices a few years ago for my Smith and Wesson M&P 9. Loved it. When i bought my Equalizer, it came with one in the box.
Thanks for watching!
I recently purchased the Equalizer - love this little tool!
That would be great for granny's like me I go to the range I have a hard time loading my Glock magazine. My Ruger Max is just fine. I would love to get one of that Maglula mag loader. Thanks kiddo. Love your videos.
Thank you. I just got one and was confused with the directions but you cleared it all up.
Thanks for watching!
Thanks for a GREAT explanation/“How to” Video!!
Glad it was helpful!
I just purchased one today not knowing anything about them and the gun store recommended that particular one for 9 mm he demonstrated for me but when I got home I had no instructions he gave me one that he had in the store he didn't have the rapper anyway when I got home I forgot what he said and what he demonstrated so I had a hell of a time trying to figure it out and could not so then I Googled it it came up with this and now I understand 100% great demonstration and now I can sleep tonight.
Thanks for watching!
I have a .380 and a 9mm. I knew this would work with the 9 but wasn't certain whether it would work with the .380. Had no issues. One thing you missed is on the back side is an unloader which works really well.
Great video! Thank you. These little speed loaders are awesome!
Thanks for watching!
I have two of the older loaders and you always had to keep the mag straight. The new unit has a mag "guide" that centers the magazine. No more need to hold the loader in the center. GREAT !
Thanks for watching!
Excellent video, thank you! The instructions that came with the UpLULA speed loader SUCK ROCKS! You video cleared it up perfectly. IMO, the Glock speed loader sux. The UpLULA is great! Hand loading 9mm or less is easy, and I'm 62 yrs old. 10mm is alot more challenging, especially loading the last 3 rounds or so. I use the UpLULA to load my 10mm rounds and it works great1 Very easy to use
Thanks for watching!
I just got mine today and I love it, my 9mm magazine is a son of a GUN to load. With this thing, it is a breeze to load. I have looked at other loaders and in most of them you have to load the first bullet yourself but this one will load first to last.
The little plastic hook protruding from the rear is for unloading magazines, works great also.
Great tip!
Omg thank you. Your video was straight to the point
Thanks for watching!
I got one and it great. My G43x mags have really strong springs and this thing saves my thumb
Thanks for watching!
Love this type of loader especially for my 45
They’re great loaders for sure! Thanks for watching!
One word
FANTASTIC !
It’s a great loader!
Thanks for watching!
Works even better if you use your index finger on top of the MagLula when pushing down !
Great point! Thanks for watching!
It came with the firearm I purchased from a pawn shop it is a CZP07 came with three mags a holster and there was an uplula loader in there as well it is by far the best loader that I have.
Sounds like you’re set up to go! Thanks for watching!
Love these things. I have 3.
They’re definitely great!
Thanks for watching!
Thank you very much, this lil gadget is awesome.
Good demonstration. Thank you
Glad it was helpful!
Does this also work on a 9mm double stack magazine (GLOCK 17) ??
Yes Bob,
Yes sir!
The ring is for the gray plastic single stack adapter that you can purchase separately. I bought it for my 1911 .45 acp.
The adapter snaps on the bottom to keep a single stack magazine from wobbling as your loading up and it has a hole for the ring to keep it with the device when needed.
Or you can keep it on the bottom while still attached to the key ring hole.
That's a great tip, thanks for sharing and thanks for watching!
@DuncanMeter your welcome! 🙂
Great video thank you
Thanks for watching!
Some of the local gun ranges now include one of these in each bay. Of course they are attached to the wall via a cable/chain so people don't walk off with them. Been using one for quite a few years.
Thanks for watching! Check out my other videos which you might find helpful!
nice video! Does it scrape up your mags?
Not at all!
Thx for watching!
Best loader period!!!!
Thanks for watching !
Thanks DM. Love Maglula Speedloaders!! 🙂
Very helpful. Ordered one yesterday.
Glad it helped and thanks for watching! Check out the other videos on my channel that may be helpful to you!
Thank you for the demo. Easy to use.
Thanks for watching! Check out some of my other videos which you may find helpful.
@@DuncanMeter will do
I have it for my 9x19. Wonderful 🤙🤙
Thanks for watching!
Thank you so much. I love this thing!!!!
I'm glad it's working out for you! Thanks for watching!
Just got a sig, 365. The springs are so tight, cut thumb on 4th round. Got this loader 👍👍😂
Brilliant, thumb happy.
Thanks for watching!
Same thing with my 365xl 🤣 just picked this loader up today!
After many years of not using a mag loader, I have finally met my match with the P365 magazine. Great video, and think I’m gonna pick this one up.
And why can’t handgun magazines be like AR/AK style where you just push a bullet straight down - lol
Thanks for watching!
Gm…. Great video,Much faster then a Glock loader….. Appreciate it!
Thanks 👍
Great video, works great on 357sig.Their murder on fingers.Great device.😊
Thanks for watching!
In my house, we load 9mm, .40S&W, and .45ACP. This speedloader handles all three calibers with no problems.
Awesome, glad it works for you! Thanks for watching!
These are excellent.
Thanks for watching!
Perfect...Thanx friend ..
Thanks for watching! Check out my other videos that you may find helpful.
excellent video; got it on the first try
Thanks for watching!
1:50 the locker on mine is black. And I can't push it. Is there something special to do?
Not that I’m aware - I’ll double check mine and if I notice anything I’ll post it.
Thx for watching!
Israel makes some great stuff🔥
Thanks for watching!
Thank you for this video‼️
Thanks for watching! Check out some of my other videos which you may find helpful.
Oh, my gosh, i've been putting the ammo in backwards wondering why it's popping back out at me!
You just saved me! Thank you!
I'm glad it was helpful! Thanks for watching!
just loaded my first 18 round magazine with my new UpLula....No Pain No Strain !!!!
Thanks for watching!
Excellent..thank you
Thanks for watching!
Thanks for reminding me how to use this thing.
Happy to help
Is this made of plastic or steel thnx
Plastic. Thanks for watching!
@@DuncanMeter i bought it thnx
OMG I have got to get this! New owner here and it has been hell trying to load.
Thanks for watching and glad it was helpful! Check out my other videos that may be helpful as well!
Thank you, it works great.
Thanks for watching and glad it was helpful! Check out some of my other videos, which you might find useful as well.
There is also a speed unloader on the back of the device, if one chooses not to risk pinching or cutting a thumb!
Thanks for watching! Check out my other videos on the channel that you might find helpful!
@@DuncanMeter😮
@@patrickschulze5130i3
You're supposed to load the first cartridge by hand otherwise you'll mar up your follower.the instructions are right on the manual
Works great love it
Thanks for watching!
I could not load more than a few rounds in the 30 round magazines for the Keltec 22WMR rifle. I can now load 30 rounds in the magazines with an Magula loader. I bought two of them in case I loose or break one.
Thank you for this video
Thanks for watching!
Got one of these because of a friend’s recommendation and love it. Made in 🇮🇱 💪🏻
Thanks for watching!
My method: Using the left hand, wrap the index finger over the hoop on top, three remaining fingers around the back, thumb around the front. Squeeze with the thumb, then push down with the index finger. Drop in the round. Release. Repeat. Works well with 17-round mags.
Thanks for watching! Check out my other videos which you might find helpful!
It would be nice if you include a link to purchase one. Thanks for the video tho!
Thx for watching
The back edge of loader has a way that aids in striping round from a full magazine
Thanks for watching!
Great video. I noticed you didn't use the small protruding "tooth" on the other side of your Updula when unloading a few rounds from your double stack mag (around 5:35).
Thanks for watching! Check out my other videos that you may find helpful.
I have one and i like it works great
Awesome! Thanks for watching!
Have you used this with single stack 380?
Thanks for watching! I have not tried
Were can you get one
Thanks for watching! Any local gun store or many online stores. Just google maglula loader
You can also use it to unload the clip as well
Thanks for watching!
I am having trouble finding this item on Amazon or another website. Do you have a link for this " 9mm Maglula UpLULA Universal Pistol Magazine Speed Loader?" Thanks in advance
There is an unloader on that uplula it is on the side, by the split ring.
Thanks for the vid.
Thanks for watching!
Maybe the best invention for pistol owners!
Thanks for watching!!
Thanks for the video I just got my first gun and bought this with it and had trouble figuring it out I've gotta use it on my 9 and my dad's 40
Thanks for watching!
Is there a model number with this ?
No serial number that I’m aware of
Love mine!!
Thanks for watching!
T. U. It is easy and a pleasure to use.
Thanks for watching!
Thank you.
You're welcome!
Works just as well as .380 on my G42.
Thanks for watching!
Works on my carry gun 380 magazine
Thanks for watching!
The EZ Magazine Loader for $12.00 works real good for over less than half the price! Get almost three for the price of one of these.
Thanks for the tip and thanks for watching!
Wow, the UpLula universal speed loader is awesome. It works on Glock 19 9mm and on my Sig Sauer P365-380 .380 magazines !
I love mine, no more having to keep so many different loaders in my bag
Thanks for watching!