ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

Glock Magazine Speed Loader vs. Maglula! Which is better?!?

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ก.ค. 2022
  • Glock Mag Speed Loader vs. Maglula Speed Loader! Which one is better?
    Watch my individual reviews on how to use each one as well!
    How to use the Glock Speed Loader : • How to use GLOCK MAG S...
    How to use the Maglula Speed Loader: • How to use the Maglula...

ความคิดเห็น • 101

  • @Norminator1
    @Norminator1 ปีที่แล้ว +40

    Magula Way better not complicated at all has to be resting on a table

    • @WildernessForever
      @WildernessForever ปีที่แล้ว

      No it doesn't...just used it for the very first time. Loaded a double stack with the mag on my leg

    • @richardgriffin4683
      @richardgriffin4683 10 หลายเดือนก่อน +7

      Creator needs to learn to use the MAGLULA loader correctly. It is a one handed loader that should be placed on a flat surface. Bullets are then fed into the loader with free hand. It’s simple and efficient if used PROPERLY.

  • @CarolinaLandshark
    @CarolinaLandshark 2 ปีที่แล้ว +49

    I like the Maglula better because it works with single or double stack mags. I find it's easiest to use if I rest the magazine base on a table instead of trying to hold everything. That way I can work with loader with one hand and insert rounds with the other.

    • @kennethallen3586
      @kennethallen3586 ปีที่แล้ว +5

      You're exactly right. You gotta put the magazine base on the work surface. Makes it very easy.

    • @rogerlampton3050
      @rogerlampton3050 ปีที่แล้ว +8

      Thats how intelligent people use it

    • @schism6976
      @schism6976 ปีที่แล้ว +1

      @@rogerlampton3050 you're so smart!! Nice to meet you!!

  • @OGSERB
    @OGSERB ปีที่แล้ว +26

    The base of the mag is supposed to be sitting on something. The table, your knee, chest. It goes turbo style. Love it.

  • @garyh1449
    @garyh1449 ปีที่แล้ว +16

    I like the Maglula because it will load most magazines. If you work it off the bench instead of in your hands it works much better.

  • @edstott4080
    @edstott4080 5 หลายเดือนก่อน +4

    The Maglula is designed to set it on a hard surface (table or counter) and it works flawlessly!!

    • @DuncanMeter
      @DuncanMeter  4 หลายเดือนก่อน

      Thanks for watching!

  • @jeffb5785
    @jeffb5785 ปีที่แล้ว +9

    I just got an Uplula a few days ago and it is a finger saver, my 9mm is such a B to load that I hardly use it. Now that I have this I can enjoy magazine after magazine rather than one and done.

    • @DuncanMeter
      @DuncanMeter  ปีที่แล้ว

      Thanks for watching! Happy it helped!

  • @joselozada218
    @joselozada218 11 หลายเดือนก่อน +6

    I use the Maglula but if you find the Glock loader easier that great too. It’s a matter of what works for the individual. Thank you for the video.

    • @DuncanMeter
      @DuncanMeter  11 หลายเดือนก่อน

      Thanks for watching! Check out some of my other videos which you may find helpful.

  • @808G8GT
    @808G8GT ปีที่แล้ว +6

    I think if you have a Glock....the Glock speed loader is simpler and free. But if you own any other brand/ multiple brands of handguns...UpLula is the way to go.

    • @DuncanMeter
      @DuncanMeter  ปีที่แล้ว

      Thanks for watching! Check out my other videos that you might find helpful!

  • @airshotsphotoco
    @airshotsphotoco ปีที่แล้ว +8

    The Maglula is far superior.. If you can't use it you shouldn't try walking and chewing gum at the same time.

    • @WildernessForever
      @WildernessForever ปีที่แล้ว

      That's true..I'm challenged by things like this, and it was super easy😂

    • @HotVoodooWitch
      @HotVoodooWitch ปีที่แล้ว

      That was uncalled for.

  • @754759119
    @754759119 10 หลายเดือนก่อน +2

    with uplula you can slide the bullet in, while with the speed loader you can only put in the bullet halfway then lift the speed loader to fully insert the bullet.

    • @DuncanMeter
      @DuncanMeter  10 หลายเดือนก่อน

      Thanks for watching

  • @HotVoodooWitch
    @HotVoodooWitch ปีที่แล้ว +4

    My Walthers and Sigs all came with their own speed loaders. The ones included with the Sigs were next to useless for loading rounds in the new magazines because the springs are so tight. The UpLULA solved the problem and it also works for my Sig 365-380 double-stack mags.
    In all fairness, the UpLULA is very robust; I've seen comments by viewers who've had theirs for 10 years or more. Bear in mind that it's manufactured in a completely different the part of Asia than the country that has a reputation for producing crap. 😇

    • @KLHJ
      @KLHJ 4 หลายเดือนก่อน +1

      Israel, engineers who designed and engineered the Uzi know how to build quality.

  • @EDDY9091
    @EDDY9091 ปีที่แล้ว +5

    Both work. The maglula is friendly for everything but if I'm just taking my glocks to the range I see no purpose to take the maglula. Funny thing is I never used to use a speed loader until I started shooting high volume in the winter, Michigan winter to be specific. Good video!

    • @DuncanMeter
      @DuncanMeter  ปีที่แล้ว

      Thanks for watching!

    • @brettblack7049
      @brettblack7049 ปีที่แล้ว

      That's why I'm here, it was cold out last weekend in West Michigan, colder now though lol.

  • @maxfalconi6995
    @maxfalconi6995 2 ปีที่แล้ว +4

    The Maglula a part for the silly name works really well

  • @johng753
    @johng753 6 หลายเดือนก่อน +1

    You should do a review on the best speed loader for 9mm Glock 33-round magazines. The spring is very hard to compress and load the last few rounds in these magazines.

    • @DuncanMeter
      @DuncanMeter  5 หลายเดือนก่อน

      Thanks for watching! Will look into it!

  • @buckeyegordon
    @buckeyegordon 6 หลายเดือนก่อน +2

    I am retired 68 years old and a veteran. I have not shot a gun in 40 years, what gun would you recommend for home security

    • @DuncanMeter
      @DuncanMeter  6 หลายเดือนก่อน +1

      Mossberg 500 shot gun. Thanks for watching!

    • @Andrew-np5qw
      @Andrew-np5qw 3 หลายเดือนก่อน

      You should get a PCC that takes Glock magazines

    • @dwaynelasater2350
      @dwaynelasater2350 2 หลายเดือนก่อน

      I am also retired and 65. I bought a Mossberg 500 shotgun for home defense like Duncan says. I like it. Easy to handle in tight spots. I also got a Glock 19 3rd Gen just in case.

  • @IVORYPaultx
    @IVORYPaultx หลายเดือนก่อน +1

    Maglula is simple to use. Nothing complicated at all!

    • @DuncanMeter
      @DuncanMeter  5 วันที่ผ่านมา

      Thanks for watching!

  • @russellkrapf1388
    @russellkrapf1388 ปีที่แล้ว +3

    I like the maglula personally .. you can send it to me if you want to get rid of yours !!!!

  • @hoss1003
    @hoss1003 ปีที่แล้ว +2

    You're having a hard time using Magula, because you're doing it wrong. Cup it in your left hand with spring lever facing to the right, with magazine in loader, while resting your hand on a table or counter top. Squeeze it and place bullet in and release, repeat, repeat, repeat...

  • @Sirjackelot1
    @Sirjackelot1 8 หลายเดือนก่อน +2

    If you only have Glock stay with Glock.. If you have several different gun manufacturers go with Uplula… it’s simple logic

    • @DuncanMeter
      @DuncanMeter  8 หลายเดือนก่อน

      Thanks for watching!

  • @dorothyglass3979
    @dorothyglass3979 ปีที่แล้ว +2

    Maglula is easy when you sit the base of the magazine down on a table or knee or anything instead of holding in your hand.

    • @HallStevenson
      @HallStevenson ปีที่แล้ว +1

      If only people read the instructions that came with the loader 😂

    • @DuncanMeter
      @DuncanMeter  ปีที่แล้ว

      Thank you!

    • @eclous_1459
      @eclous_1459 ปีที่แล้ว

      Same with glock loader

  • @user-pp3rz2dh5j
    @user-pp3rz2dh5j 11 หลายเดือนก่อน +1

    You are using this wrong. It tells you that the Uplulu is supposed to be set on the table. The hand holding it is pressing down and controlling the release button. T he other hand is only used for the rounds. I have one and its super fast i can load a full 9mm Springfield mag in like 15 seconds.

  • @johnbrewer171
    @johnbrewer171 ปีที่แล้ว +1

    I just used my glock 19 loader to load my sig p365xl 12 round mags which are a bear to load yesterday. I had not watched your video and actually had never used my loaders before!! Glock mags are tooooo easy to load!! Don’t need it. Works ok on the sig. Not perfect but cheaper than 35.00!!!

  • @torrymonientas
    @torrymonientas 10 หลายเดือนก่อน +1

    I prefer the glock system as it not make presure on the bullet against the shell... As also ets speed loader does heavyly.
    Pd:
    Ive never used a speed loader. But i reload my own ammo and have enough ballistic knowledge to know that 9mm luger bullet is pretty "loose" in his shell

    • @DuncanMeter
      @DuncanMeter  10 หลายเดือนก่อน +1

      Thanks for watching

  • @gerardmcquade9102
    @gerardmcquade9102 3 หลายเดือนก่อน

    the maglula is best because it does all different types of pistol magazines

  • @J1Z06
    @J1Z06 ปีที่แล้ว +2

    The Glock loader is fine!

  • @dkongul
    @dkongul 4 หลายเดือนก่อน +1

    you are using the maglula wrong. you have to put the mag on the table. push the maglula down with your hand while pressing the lever with fingers while other hand feeds the freedom seeds. . you can load a 30rd mag in seconds.

    • @DuncanMeter
      @DuncanMeter  4 หลายเดือนก่อน

      Thanks for watching!

  • @larryg.overton2951
    @larryg.overton2951 ปีที่แล้ว +1

    Helpful video. I first saw your review on the UpLula, then followed the link to this vid.
    That said, my mileage varies. IOW, I would favor the UpLula. One of the main reasons is my 9mm isn't a Glock. Yeah, I could order a Glock speed loader for my double stack, but your point about the Glock being "free" wouldn't be true for me.
    And I would argue that it wasn't "free" for you, either. Yeah, I'm really picking nits, here, but you paid for whatever came in the box with your Glock. The cost may have been negligible, but it wasn't technically free.
    In your UpLula review, you made a point to say that it was simple. In this comparison, head-to-head video, you downplayed that. Understandable, since the nature of this video was comparison/contrast. And I'll grant you that the Glock speed loader may be easier.
    As you also acknowledged, the UpLula has the advantage in being more versatile: multiple calibers, single & double stack mags, etc.
    So for all these reasons, the UpLula gets my vote. Still, that Glock does appear to be dead simple, so if someone were to give me one designed for double stack mags, I wouldn't turn it down.

  • @tonycolca2241
    @tonycolca2241 5 หลายเดือนก่อน +1

    I like the maglula with double stack 9mm and double stack 45 acp. I don't like it with single stack mags or double attack 380 in some cases the provided one works better. The mag Lula really shines with double stack 45 acp

    • @DuncanMeter
      @DuncanMeter  4 หลายเดือนก่อน

      Thanks for watching!

  • @franciscolgonzalez9376
    @franciscolgonzalez9376 7 หลายเดือนก่อน +1

    I like the Maglula better. It's faster and has never failed on me.

    • @DuncanMeter
      @DuncanMeter  6 หลายเดือนก่อน

      Thanks for watching!

  • @joecasillas7966
    @joecasillas7966 11 หลายเดือนก่อน +1

    Well, call it a Glock speed loader or whatever stamp is on it. Mine has H&K and I couldn't figure out how to use it till I looked for a video 😂 Since I already had a Maglula for my S&W Shield mags, it's a no brainer which is easier and faster hands down, well worth the $30 compared to the freebe.

    • @DuncanMeter
      @DuncanMeter  11 หลายเดือนก่อน

      Thanks for watching

  • @C1nderfire
    @C1nderfire 2 ปีที่แล้ว +4

    Even tho it takes longer, I just suffer with the one that came with my weapon

  • @E-Ryders
    @E-Ryders ปีที่แล้ว +1

    Where can I buy that ammo storage box/case?

    • @DuncanMeter
      @DuncanMeter  ปีที่แล้ว +1

      That’s for watching. Pretty sure I got it from cheaper than dirt website or dicks sporting goods a while back.

  • @kjudebernard8228
    @kjudebernard8228 8 หลายเดือนก่อน +1

    Use the lock when you push down... 🤦‍♂️ so you don't have to hold it closed... 🛡
    You can do it!

    • @DuncanMeter
      @DuncanMeter  8 หลายเดือนก่อน

      Thx for watching

  • @brr8888
    @brr8888 ปีที่แล้ว

    The Ludex and Speed Beez are the best.

  • @Hawk-qn2zk
    @Hawk-qn2zk ปีที่แล้ว +6

    No way is the Glock loader better.

  • @dennisleslie
    @dennisleslie 10 หลายเดือนก่อน +1

    I just bought a Glock 19x and I didn't get a speed loader.

    • @DuncanMeter
      @DuncanMeter  10 หลายเดือนก่อน +1

      Thanks for watching. It should have been included

    • @dennisleslie
      @dennisleslie 10 หลายเดือนก่อน

      @@DuncanMeter I went back to the dealer and they gave me one. But. It sucks. So I bought the Maglula and it’s awesome. 100% recommended.

    • @jacksoncornbreadmcbride6763
      @jacksoncornbreadmcbride6763 9 หลายเดือนก่อน

      ​@@DuncanMeterAre you no longer producing?

    • @DuncanMeter
      @DuncanMeter  9 หลายเดือนก่อน

      @@jacksoncornbreadmcbride6763still producing! Just took a small break but will be back in action within the month!

    • @jacksoncornbreadmcbride6763
      @jacksoncornbreadmcbride6763 9 หลายเดือนก่อน

      @@DuncanMeter great, I'm looking forward to them, very informative. However, please slow down with the constant "unfriendedly state" comments. Just here for gun information, not politics. Thanks in advance.

  • @nostradamus4828
    @nostradamus4828 ปีที่แล้ว +1

    I agree with your choice

  • @warriorlandholster
    @warriorlandholster ปีที่แล้ว

    How could contact you?
    We sincerely invite you to review our gun light and holsters.

  • @bubaa1218
    @bubaa1218 หลายเดือนก่อน +1

    Speed loaders just slow me down. I’m a lot faster just doing it by hand.

    • @DuncanMeter
      @DuncanMeter  5 วันที่ผ่านมา

      Thanks for watching!

  • @Nordraw
    @Nordraw 2 ปีที่แล้ว +3

    Can’t agree with you dude. If you’re saying it’s cheaper , no question but better? No way

    • @DuncanMeter
      @DuncanMeter  2 ปีที่แล้ว +2

      I respect your opinion. I’ve been using the glock ones for years so personally find them quicker and easier - but I do see the benefit to the Maglula if you have multiple different magazines and calibers. Thank you for watching and commenting!

    • @louispoliskie7708
      @louispoliskie7708 2 ปีที่แล้ว +1

      @@DuncanMeter I totally agree with you. I used the Glock speed loaders for years. Then I went to the range and had to purchase one of these other loaders it was very frustrating and trying to load the magazine. That is my thought on this subject.

  • @andresc5915
    @andresc5915 ปีที่แล้ว +1

    Seems like more work for the same result…

  • @jorgeeperez9754
    @jorgeeperez9754 2 ปีที่แล้ว +3

    I'll stay with the GLOCK

  • @hamishalexander5048
    @hamishalexander5048 ปีที่แล้ว +1

    there is no comparison, glock is a basic thing maglula is enhanced

    • @DuncanMeter
      @DuncanMeter  ปีที่แล้ว

      Thanks for watching! Check out my other videos that you might find helpful!

  • @dontworryaboutme1488
    @dontworryaboutme1488 ปีที่แล้ว +1

    My Glock speed loader just broke , wouldn’t recommend

  • @vladpisarenko3094
    @vladpisarenko3094 4 วันที่ผ่านมา

    Big man no so smart

  • @curiousrelic
    @curiousrelic ปีที่แล้ว +3

    Glock speed loader sucks and is trash.

  • @christianmagbanua5756
    @christianmagbanua5756 11 หลายเดือนก่อน +1

    Hahahahahhaha maglula is complicated?🤦 Put it on the table then load it

  • @KLHJ
    @KLHJ 4 หลายเดือนก่อน +1

    It's not an either or world, how about both!

    • @DuncanMeter
      @DuncanMeter  4 หลายเดือนก่อน

      Good point and thanks for watching!