Engine cranks but won't start .Passlock 2 problem.2004 Chevy Classic /Malibu
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Here are some of the tools that jimthecarguy uses
www.amazon.com...
Don't over look the ignition switch.Engine cranks, no spark, no injection pulse, no fuel pressure and no theft light. Intermittent no start how do I check it.How to fix the theft passlock system in 2004 Chevy Malibu / Classic when the car won't start.
Well buddy after watching your video I was able to start my 77 year old mother's 03/04 Malibu. She was so happy she started crying so you know you made my whole week better. Thanks 😊 so much. You and youtube are what makes America great !
He no but e bbbb be. Bbbhbh no night be better no
seriously happy to have people like you in this world. thank u for taking the time to help others in need buddy. my issue still stands though :'(
just want to say thank you. after weeks of 05 Malibu slow or no starts and realizing it was not the theft system I was looking through all the videos and found yours. Your detailed explanation of the symptoms led me to take a shot at the ignition switch. Three days later we have instant starts. Thanks for your diligence and investigations. great work
okay, I just want to say that you are a life saver!!! I went out to my car, put the seatbelt on, closed the door and locked it. Cranked my car and it would crank but it wouldn't kick over, as soon as I unlocked the doors the car started right up!!!
I've been getting a recall letter from the manufacturer to take it in for a faulty ignition switch free of charge. I'm glad there's still good people out there to help others. Never loose that spark
Thank you for watching . Let me know how you do with the recall. Don't forget to subscribe.
(See update below)We've been experiencing this mysterious issue with my wife's car, a 2004 Monte Carlo SS for the last few months. We've been nervous about my wife driving it anywhere since it happens without any warning leaving her stranded somewhere until it decides it's ready to start up again, sometimes hours later, again mysteriously fixing itself and starting up and running fine. Our mechanic has been unable to diagnose the issue causing this and was just as puzzled as you were in dealing with the inconsistency of the occurrence of the problem. We will share this video with our mechanic and see if he can get the same results as you. Thank you so much for making this video, even if it proves not to be our issue, it was well done and I enjoyed hearing you explain your troubleshooting methodology. We can all take a lesson from that. I will update this comment later when we find out how our own issue turns out.
(Update) We do believe that this was the issue as we have since replaced the ignition switch, (all on my own and with great ease I might add), and the car has started every time for several weeks now. In fact, it seems to fire off much more quickly than it ever did before. The process of replacing the ignition switch was very straight forward after watching a well made video on here about it. I went slowly and it took me about two hours in total and the part was cheap from a local source. We are very happy with the result and are back to driving our great car with confidence. Thanks for sharing this great video with everyone.
18:53
I have seen several of your diagnosis and repair videos. This is a smart man AND good mechanic. Thank you.
Hey Jim just wanted to thank you big time for your thorough explanation of the troubleshooting you did! I ended up having the same issue without knowing it and have spent many maddening hours trying to figure out intermittent voltages and failures of the anti-theft system. I've got a 2001 Chevy Malibu with Passlock and have been having no end of problems with the anti-theft system and the car refusing to start (cranks, then weird dash indicators and no ignition). I've tried every suggested method of resetting the system, new keys, and was just getting ready to implement the hack with a toggle switch on the Passlock Signal wire. The vehicle has been dead for a week while I've been trying to reset the system. Before cutting into ignition wires, I decided to check online one last time and fortunately came across your video. I managed to reach up under the dash and push/wiggle the ignition switch connectors around to reseat them, and the car started right up! Thanks to you, I'm pretty sure the issue is the ignition switch housing connectors. Thanks for the video!!! For all those who are impatient and have a Malibu, take the time to watch this video! It is likely a solid investment of your time if only for the insight into the electrical system issues with this vehicle. This isn't the first time I've run into intermittent and hard to diagnose electrical system problems (turn signals/hazard relay, and AC panel failures as well). Thanks Jim!
+Steve Wurster First let me say thank you for taking the time to let me know what you thought of my video.This car did drive me crazy with the intermittent no start:( But I felt really happy to finally figure it out:)I hope I saved you some time and most important money.Jim
+jimthecarguy Jim, I have a friend with a 2001 Malibu with this exact problem. She's already spent a ton of money between getting towed multiple times and diagnostics, battery, alternator (which was going bad anyway), and even a replaced fuel pump (Her mechanic was not quite as concerned about doing that job as you were) but still has the problem. When this happens to her again, I am going to have her do what Steve here did and if that fixes the problem then we know to replace the ignition switch. Thanks for taking the time to not only solve the problem for your customer but share the information with the rest of us. You're a life saver!
It sounds like the switch to me .If the next time it don't start and the check engine light will not light up .The switch is the problem.Keep me posted.Jim
I just got the hook up. I like this talk/walk/source/cited/diagram/procedural/function checking and tracing of the job. True mechanic Sir I salute you. Place a electronic payment button if you don’t already have one because you are the standard and a set example for how to video logging. Much appreciated. I might email you a couple questions if I can’t find the look the answers up myself. I know you enjoy these difficult diagnosis. That was like car brain surgery. I’m impressed.
I really appreciate your professionalism and honesty sharing this information with TH-cam users. You saved me from a big headache chasing this problem. I really thank you as I ran on same problem few days ago. Thank you Sir for your kindness and service to others. God Bless You and your family and enterprise.
Thank you for taking the time to make this video. 215,591 views to date. That is a lot of people who have benefited.
Thank you.That why I do the video on You Tube to help .I am happy to share my knowledge.
@@jimthecarguy very awesome of you
MANNNNNNNNN!!! UR SOMETHING LIKE A GENIUS!!! IVE BEEN TRYING TO FIND OUT THIS PROBLEM FOR SOOOOOOOOOOOOOOOOOOOOOOOOOOO LONG. BLESS YOU MY BROTHER FOR TAKING UR TIME OUT AND FIND OUT THAT PROBLEM !!!!! TRUE MECHANIC-ISM
Thank you for watching . Don't forget to subscribe. Keep me posted how you do.
Thank you for your quick response. I really was not expecting that. Your awesome. Thanks for the feed back, I just saw alot of people that do that on utube, wasn't sure if that is a good alternative. I'll just change the ignition. I figured that is the best way to go. My car 15 min in driving suddenly the light came on and was worried weather I would make it to work or to get home. Strange. Hopefully this will fix it. Thanks again
I dont see my post from a week ago saying howvit quit again but its been working great. My starter just crapped out.. I banged on it and it started. Had it rebuilt for 45 bucs.
I guess if you try too much to start it the security light comes on solid.
But your fix did take care of the passlock issue. Thanks
Just want to say thanks. Having the same issued with 01 yukon. Been pulling my hair out for two weeks. Can't tell you how many times I reprogrammed the key. The modual had everybody telling me to reset the bloody key. Just got lucky to see your video. And had similar issues with the same color wire and voltage. I'm a subscriber and a avid follower of your chanel. Thanks again.
Got an 07 Colorado. Every 20 or 30 starts, I must wait for ten minute, and then go to start the truck.... Sometimes twice, but whenever it does it, it will alway start after 10 minutes, generally. Thanks for the great Video. Made a lot of things clear. Stan in Hawaii
Thank you. My daughter called me from half way across the country, stuck in a parking lot, car wouldn't start, cranks and cranks. I walked her through checking for fuel pressure, the connections at the ignition module, checking the air intake for blockage (she'd been driving in the desert). I was wracking my brain fuel check air check, gotta be a spark issue. The car had been running right up to parking in the lot, no check engine light issues... I thought Theft system? She said the check engine light came right on. I had her try the chicken dance (no go) TI started for a second with starter fluid... then I asked about the Theft System light. Had her turn the key, bump the starter and wait ten minutes. We were telling bad jokes waiting when the Theft System light went out. She got excited and tried to start the car, and... she's back on the road all giggles and smiles. Thank you again. It's these little sequences that are so important to have in your mind. No way I would have known the sequence if your video wasn't here. Thank you again and again. Now... how to bypass the seed chip before that fails...
Thank You for all the extra effort in diagnosing this crazy problem! Anyone can change parts & tell the customer some bullshit about five different parts they "had" to change that you knew had nothing to do with the fix! So the customer has paid for a bunch of parts they didn't need because the mechanic / technician they took their vehicle to was nothing more than a parts changer! I have seen so many times where the computer doesn't give the so called mechanic an exact code,they are lost & that's sad! A true mechanic /tech needs to understand how to chase a problem sometimes one component at a time &'rule out the false & or multiple codes! In this case, no code! Great job! This one calls for a huge "At A Boy"!
this sounds like the ghost i have been chasing for the past month . thank you . im now a subscriber
Just saw this for research to go "help" a cousin this afternoon. AWESOME video! I have subscribed and only critique your voice volume while standing in front of the vehicles and be sure your camcorder is focused on the diagrams, of course i'm sure you've corrected these small issues in 5 years. VERY VERY helpful for us "shade-tree" guys who do this and help others for the fun of it!
We're rollover switch on these cars at
03 Silverado cranks, no start, no codes, no ignition pulse, no five volt reference at PCM, (passlock 2?)security light goes out a second after turning to "on" position. Watching your diagnostic several times. I think truck is not sensing the key simular to this situation? Is my ignition switch included with the cylinder lock housing or separate? Any advice? Thanks, Rich C
Hey, Jim
Very informative video. It might end up saving me god only knows how much money $600? I have a 2004 chevy classic (malibu classic?), Anyway, within the last month, it randomly didn't start after driving to the store, going inside and coming back out to go home.
Had car towed to shop, couple hours later when they went to check it, car acted completely normal. They tested fuel components, pump ect -- no codes, no issues found. Obviously, no issues were found because car wasn't acting up when they went to test it. Car started and drive like a dream for another two weeks or so. Then, this morning, went to start it, car cranks just fine, just acting like it's not getting fuel/spark. Not sure what injection pulse is, but it's probably not getting that either.
The car has 167,000 miles and has been maintained flawlessly.Car has been sitting all day, tried to start numerous times throughout day with no luck. It's definitely not the passlock system because theft light isn't blinking and already tried the relearn procedure. Car was driving just fine just the night before no problem. No indications that it would be the fuel pump going bad.
I have the stereo unpugged, front plastic trim removed, basically all of the stuff you would need to remove to replace the ignition switch. All of a sudden, since today, the car doesn't make the ding ding ding sound that it should when the driver door is open with the key in. Another thing that might point to bad ignition switch -- the light that illuminates the shifter to show you what gear it's in (automatic transmission) has not been working for many months. I read somewhere the ignition switch controls power to that light and dash lights/gauges?
I've ordered this part:
www.amazon.com/gp/product/B000C7YKHK/ref=od_aui_detailpages00?ie=UTF8&psc=1
would that be the right part like you discussed in this video? I'm planning to just replace only the part that you took apart towards the end of your video. I'm planning to reuse the cylinder thing that the key goes into that slides into the housing, which I believe has the passlock chip on it because your video basically says it's the ignition switch is bad -- the part I ordered? Is this correct?
The switch that you took apart in the video controls the fuel pump, spark and all of that stuff at the same time -- is that correct? Also, has your fix held up for the customer? Thank you so much for your time!
-Julian
JustRelax Does the check engine light come on when the car won't start?Yes the switch in the link is the correct part and you can use the key switch in the new electrical switch.Make sure to switch over the vat connector from the old switch to the new.Let me know how you do and if you need an more info.Jim
jimthecarguy Hey, not sure about the check engine light. There are no codes in the computer for the issue. I think all of the lights that are normally on when the key is in "On" position ( not start) stay on. Is there any surefire way I could check the fuel pump or would the bad ignition make it look like the fuel pump and other components are all not working?
Also, did you see my comment about the shift selector light not working? Is that connected to the ignition? Also, I found another video for a 2002 impala where the guy fixed the same issue by swaping in a new ignition. He took the ignition apart in great detail, like you did, but in his video he says the contacts on the pieces of metal in the ignition should be silver and shiny, and they were black. The contacts that supplied power to the components that weren't working, like the cruise control, were black.
What are your thoughts about the blackened contacts? Maybe you could run a multimeter on the contacts to see if they conduct electricity differently than the silver, shiny contacts?
Jim The Car Guy, I have a 03 Chevy Malibu the 3.1 engine, that I just bought, my problem is the opposite mine is the Anti-Theft, car will crank but won't start of course I thought it was a fuel pump to, so to find out I guess that's common problems for these cars, so when to TH-cam four answers, and turn the key on the anti-theft system flash oh, you got to wait 10 minutes to stop flashing turn the key to off position, and then start the car and it started oh, so therefore I was happy I thought my car was fixed, but no it didit again oh, so watching your video I'm going to put a new ignition switch and I think my problem will be cured I hope, thank you Jim The Car Guy, from Brighton Colorado...
Update?
I have same problem, my wife says car won't start I go outside it starts every time until today it would not start for me then it started fine. Nice video ,I appreciate the tip on the intermittent start up problem.
I have my son’s car he past away. And his car will do that . However I have fuel pump comes on , there is fire and all dash lights come on etc. but the thing starts up when it wants too. And when it does fire over everything works great. Others wise it will crank over and doesn’t start . Thank you for the video.
Sorry it’s a 1996 Or 07 Chevy v8 Camaro . With that vast key.
I'm happy to help .Thanks for watching
Having issues with my '04 Impala 3.8L. It ran then didn't run, crank but no start. Replaced the ignition switch, started right up. Did that for awhile every time after. Back to a no start situation after wiring in a resistor to bypass the security message on the dashboard. Relearn process is a pain not even sure I'm doing it right because the message doesn't seem to want to go away. Could use some real guidance here...
Just wanted thank you so much!!! i had the exact same problem and didn't know what else to do and was completely lost. i will be going straight to your page from now on thanks again you saved me alot more then time and money.
Thanks for watching. Im happy to help.
Im having this very same problem with my 2001 gmc sierra. But how is your video going to help????
I have an 07 Malibu. I've been having the same issue, took it to my mechanic I changed both the fuel pump and water pump, got the car yesterday took my kids for a ride and the same thing before changing both parts happened again. It was riding smooth when I parked and turned it off, I tried to turn it back on it tries to roll over but doesn't, battery died, car didn't overheat nothing. We were stranded. Took the car to my mechanic today by tow truck, he can't find nothing wrong. I watched him check everything still nothing... Right now this is my last resort if not I give up. Thanks for the video hope it works.
Keep me posted.Let me know if I can be of any help.
My Theft System light stays on steady. No codes show up though. But on Easter, it just wouldn't start. It cranks when I turn the key, but it doesn't start. Battery is fine. One person thinks it's the Alternator, but 3 people said fuel issues. I have the same year, make, and model, that you're talking about in this video. Dealership won't even look at it.
I do a live stream on Sunday at 7:00 PM .I will talk about this problem then.I hope you can stop by.
How did you heck the switch did you have to take it off to get your hands on the wiring or part you noticed would go low or higher ?
We have a 2001 gmc yukon and it has an issue with the security system i believe. Sometimes you have to jiggle the key to get the security light in the dash to go from red to yellow to start the vehicle or a after driving it to get the light to turn yellow when removing the key otherwise the door tone will keep beeping and the battery will need a jump in the morning. Im hoping to just replace the ignition tumbler thinking its worn and not recognizing the key/signal sometimes.
Jim, I'm having a similar problem I got a 2000 Oldsmobile Alero 3.4 V6 . I guess like a million codes came up on the scanner crank no start runs for a second and a half. Change the fuel pump fuel filter both crankshaft position sensors camshaft sensor fuel pressure regulator. New wires serpentine belt. I'm getting fuel to the Schrader valve and my pressure is up 50 pounds worth supposed to be. I did some research on a 3400 3.4 engines GM well first thing I saw it was passlock security but all the reset procedures and diagnosis for that is a blinking security light my security light stays solid red. So I recently found out that they're also ignition switch is acceptable which also runs off the computer and sends signal. But instead of going to head and cutting into my wires and BCM I'm going to go for the ignition switch if that works I'll try to respond back and put that in there hopefully I'll be helpful to thank you for sharing your knowledge and very good video I appreciate it my grandfather was a mechanic and I'm working on my own car I have the most most up most respect for mechanics now
Your tips on reset the the PATS system solved our no start issue for now. Hope it holds. Verify informative video but just needs better audio pick up. Thanks.
Thank you for the advice.I did buy a new camera that has much better picture and voice.I'm happy to help'
Hello, I have a 2007 Hummer H3 that will not start all the time. When it doesn't start the gas gauge and temperature gauges do not work. All fault lights appear on dash. When driving it will do it and the car still runs. The speedometer, tach, miles, gas gauge, temp don't work and also all fault lights show and display on warning display. I replaced passlock sensor only and it still does it. I put new relay in RUN crank and it work for a day. Then driving it messes up again. Just wondered if your problem could be the same? No one has ever posted a problem like mine. Thanks for your time. I did post a video and no one comments also on a hummer forum. No luck yet.
Do you have to have the tumblers in the switch and the key cut before you can program the chips to the car
Hi Jim my parents have a classic Cheverlet 2004 and it doesn’t start only makes the sound os if it going to start could it be a sensor what do you suggest 😊 pls ?
hello did you replaced just the ignition switch or the housing thanks
I also have an 04 classic and Friday I had started it to scrape the windshield off and about 5 minutes it just died, I tried starting it back but the first 2 tries it sputtered and died and after that it just cranks. I changed the fuel pump relay and that didn't help any. The check engine light stays on while cranking and the theft light does goes off . I have had problems in the past with the theft system going off randomly. I am going to pull the ignition and wiggle the wires , check for tightness and see if that helps. If the messing with the ignition doesn't change anything where should I go from there? Thanks for the help and the video.
Hi Jim, I have NO car problems whatsoever. Just wanted to say thanks for the vid!
+RGTelesound Thank you for taking the time to give me your feedback.Jim
I would say dude " you could fix the space shuttle but i will go one better ,Dude , you got the talent to design aerospace advance electronics ! my cavalier ( 2003 ) has similar anomalies, now its in total theft mode ( wish i had my 1971 bettle on the road ) .So i got some ideas to try here.Thanks for wonderful vid!!!
Good luck . Don't forget Live stream on Sunday at 7:00 PM
Jim I have a intermiten crank no start issue, my 2002 GMC envoy has been in shop 2/12 weeks out of almost month I've only had it.Its not battery or starter( not sure about selenoid though).When it does start,its very strong.When i try to start it n it just crank but no start,when i turn the key off,i hear a littlr sizzle from under the hood.It dont sound normal.It seems like it isn't getting gas but my mechanic keeps telling me that all this week,it has been starting for him n can't diagnose issue until it cranks but wont start again.Last weekend a friend n I went to the store n got stranded for almost two hours,he n I googled like I always do n he found something that said try this,I was so frustrated n just called a cab,my friend says to me,I'm finna get this started,I was by the car n I assume he turned ignition to start or on position,went under the hood,took off green cap,used a key or something to push in button n truck fired right up.I thought that is was fuel line but when I told my mechanic what happened, he paid me no mind n that had nothing to do with it,etc.I showed him under the hood what he pushed,he said no,that's just a vacuum line n shouldn't have anything to do with why the truck cranks but no start intermittently. Could u please help me.Any ideas.I see why the person sold the truck,but I'm not a quitter,I'm very curious as to finding the issue. my very first car did this same issuen no one knew what is was so I let someone talk me into buying a switch to override the ignition n go under hood n turn switch to start it that was,so embarrassing.Eventually got another car.My mechanic saying its got good fuel pressure but said he had to fix fuel pressure regulator case it had gas n it n wasn't suppose to n changed out ignition switch.According to my mechanic it has started everyday the many times he has tried throughout day and week.Please help!!!
Hi my name is Rudy, I have a 1996 GMC suburban, One leaving work is stop running and we would have to move the steering column up and down to get it to start again, Now it will not start, you turn the key and not thing happens. The garage lights will not come on when the key is turned to start and no klick sounds, checked battery, starter, all fuses and still will not start. Help!
Wow! Very good video, plus it helps that you are good looking with that great eastern avcent! Thanks!
I have a 2005 Chevy Trailblazer, it cranks but won't start. we have changed the fuel pump and still won't start. brand new battery and new relays. what do you think can be wrong with it? it was running just fine and we turned it off for not even 5 minutes and tried to turn it back on and that's when it stopped working.
I replaced my ignition switch and am still having problems getting it to start.. the fuse you showed sits loose in its spot 🤔 and before I even get my key in everything would start making noise like I had the key in.. radio etc.. im at a loss at this point.. my cars been down for 3 frkn months now help?!
I have a 2005 Chevy Trailblazer, it cranks but won't start. we have changed the fuel pump and still won't start. brand new battery and new relays. what do you think can be wrong with it?
I have the same exact problem with my 2005 Chevy trailblazer and I'm trying so hard to hear you so hard I'm telling everybody in Burger King to be quiet and I'm trying so hard to hear you cuz it's so important and everything you're saying is so good and so true and so nice and so perfect but I can't hear you please don't do that because it's like stressing me out even more on your next video make sure you talk louder or bring the microphone closer to you please please
Jim The Car Guy, it's Anthony again forgot to ask you a question, so when I buy a new ignition switch does a new key come with it, or do I have to take it to a Chevy dealer and they have to make me a key for the new ignition switch? So therefore where does the new key come in place??? Thank you
Does Passlock 2 kill the positive side of the injectors or all the negative sides?
It was wonderful lesson. I really appreciate your time and effort in helping people like me.
Thank you .I hope I was helpfull.
Thank you for this video of yours. This fits the issue I'm having and I now have some things to test based on all your hard work. Again, Thanks!!
+Reloader's Info Channel Good luck.Let me know if you need any further info.Jim
I have an 05 Chevy Malibu Maxx LS it clicks but won't start, I got my starter replaced and it still won't start. What could be the issue with my car?
Mine does the exact same thing except when it does it no warning lamps or lights at all come.on also no chime from door being open.After i keep turning it on and off for a while the lights come on and it will start right up.Also stalls sometimes and same thing no warning lamps on.Could it be same thing?
Great video. I've done drivibility for 25 years and I know how it feels to have your ass handed to you. I am fighting one of these tomorrow. Thank you bro.
Hi I'm Tim in MN here. I'm working on a 99 suburban 5.7L I got cranks but no start got fuel but spark is sporadic changed crank sensor, ICM, Hall effect sensor, coil, Still no start cranks & fires 'like out of time but is not' & will not start can u help me with what I'm may be over looking? Maybe you've had this problem before & what u did to figure it out? thank you
Hello I have a 2003 Chevy Malibu, I turn the Key to the on position the ( theft light) is solid Red, not blinking but doesn't go away it stays red. And when I try to crank the car it really slow turning over. Any pointers? thanks
Love your video, thanks for doing the hard work for all to understand. Im going to chang the ignition when i get a chance. What do you think about bypassing the vat?? Or do you think replacing the ignition is the better way to go? And yes i definitely subscribe 😊
Bypassing the vat is not an option. It will cause more problems for you. Keep me posted. Thanks for subscribing
Aye Jim I got 2003 Chevy Impala. It won't start I recharge my battery it would make the cranking noise but won't start. Problem can't be diagnose on the scanner
Hey so I have a 2000 Sunfire. Under the hood I have this purple wire that looks like it melted now it’s not connected it’s just there its sitting on the battery side of my engine but at the back I have no clue where it go’s. Now I have no spark and my fuel pump is working and my car cranks do you have a clue where this wear gos and if it’s related to having no spark
I have had some experience with similar problems on GM cars. I shudder when I think of the current keyless cars. What are we going to do when they come in on a flatbed? Excellent video. Thanks
That's true what are we going to do when they start to fail.We both know that it is only a matter of time.I guess we will find out.Are you in the business?
I've had this problem for a looong time. I know what to check now, thank you!
Thank you for watching . I'm happy to help. Don't forget to subscribe.
My 03 monte carlo 3.8 starts but idle drops and the oil pressure goes up and down non stop . When I turn the key before starting I notice i have low voltage it starts up fine the first thing in the morning then when I hop back in it after I'm leaving the destination it don't want to start without idle dropping completely and car shutting off so I hold the gas and put it in drive/ reverse . It don't enjoy when I turn the wheel at low speeds when I do this . Could it be the ignition module ? I've replaced alternator battery and ignition module and nearly everything on here and still no luck . I didn't have this problem when I first had it but it did misfire but 1 grand later the misfire went away then a year later this problem hapend .
Jim, thanks for your time! So i have a 2006 chevy colorado truck that randomly will not start. She only has 65k miles so i really want to figure it out but its frustrating! Is this a common problem with my truck?
Is this the same as on a 2003 Malibu? I am having same problems as you described here on a car I just purchased for my daughter. Can you give me an idea of how much this ignition cost and weather its a dealer item? Last but not least, does the original key have to be programed to the new ignition assembly?
Yes it is the same.From what I recall it was not very expensive and you can get it aftermarket .When you replace the electrical switch there is no programing needed.Keep me posted.
Hello there I think I might have probably we just brought 2008 Chevy impala and she was running great .. then I went out the next day and would not start my husband’ comes out looks at battier and then walked over and it started .. so we call the guy we got it from and he said he had so many different people telling them it was different things he started fixing everything everyone told him .. he said it’s something to do with bypassing the transponder .. but we did a we did a pressure test for the fuel pump and it doesn’t move we don’t hear the fuel pump kick on either so we are think fuel pump but the guys said he just changed it and it does not happen all the time .. was hope maybe u might have an ideas
Hi Jim! I have a 2005 Chevy Malibu Classic and my car is behaving the same way. It will crank and crank but it will not start at all. I’ve changed the battery and replaced the spark plugs and nothing works. I’m starting to think the ignition switch could be the problem.
I have the same car and mine has been sitting for 6 months. 😢
I have a 2002 chevrolet impala that wont start only cranks.Now put a new ignition switch because the old one would get stuck. So my question is the the security light comes on & it wont come off , I try every step on how to disabled it but still wont work .Is the security light the same thing as the theft light & how can I disabled it ? thank u
i have a 2009 chevy impala with a v6. It turns over but will not start, I have check to see if it has fire by pulling a plug wire and sticking a screw driver into it and grounded it a ground source. It has fire and fuel, no warning lights at all. I'm not sure it the check engine light comes on or not.
Wow, that was extremely comprehensive, Jim ! This may apply to another gmc I've had come back a few times I refuse to believe it's the pump. If youre still watching, what pid was the low voltage ? Thanks
2004 Silverado, drove 0 problems parked over night and went to drive next day first noticed my fob wouldn’t unlock the door, so I unlocked with key. Crank no start, no interior lights, power door locks, power windows and gage cluster has no back lighting. Tries to start but fuel is cut off. I’ve checked everything I know to check even bypassed the security still no start. Sound like body control module? I’m stuck here!
Hey Jim,
Great video and very thorough. Looking for some advice. I have a 2009 Chevy Express 3500 with a 4.8L in it. This is a customer's vehicle that came in with an original no crank, no start condition. After my original diagnosis, I informed my service advisor that it was a VATS issue and the key needed to be reprogrammed. So they reprogrammed the key and the vehicle now cranks but does not start. I checked fuel pressure thinking a pump failure and there was no pressure so I checked all fuses as well as swapped relays for the pump and still no start. After informing my service advisor of this he wanted to buy a new fuel pump and put it in so I complied. After installing the new pump still cranks but does not start with no pressure. Only code is for an EVAP purge canister solenoid which would not cause a no start issue. I am at a loss now. I did find out that they purchased a used pump instead of new one but definitely do not want to drop the tank again if I do not have to. Not the best electrical troubleshooter that is for sure but been a mechanic for many years. Any thoughts to begin my electrical diagnosing of the switch...?
I'm not understanding..... Vehicle cranks ............. But won't start but the ignition switch fixed it? And you didn't have injector pulse so the ECM had you shut down ignition switch is turning the starter? On my wiring diagram I see the injectors are ran by the ECM and it's drivers? How was it the switch?
+jj vwguy OK well thank you for watching
2002 Malibu running good when I shut it off now it won't start fuel pump a chicken in what's the problem with that could it be a relay
hey jim thank you very much for this video i been having these same symptoms on my 06 chevy Malibu for months now ive changed so many things including camshaft , crankshaft sensors both maf and map sensors all 4 o2 sensors and fuel pump still no start. my questions is does the vat or passkey module sensor come in the new ignition switch or is that a separate part? is my best bet getting the whole assembly from a junk yard or can i just buy a new ignition switch from autozone ? thanks
I had similar issue. Sometimes turning over the key, if the check engine light didn't turn on it wouldn't start. Wait a couple minutes, turn over the key and when the check engine light was on it would start. I thought my issue was the same as the above, but first replaced the crank sensor that had 297,000 miles on it. After replacement it took about 10 starts to reset the computer and I've had no issue whatsoever with it starting up. My 2005 Chevy Malibu Classic with 297,000 miles had been getting poor gas mileage for the several months. Down from the normal 29-33 MPG to 22-24 MPG. No computer codes displayed to alert any issues, so I've been at a loss. A view of the spark plugs show an excellent healthy motor. Recently, it became difficult to start and the RPM's would drop slighlty when turning on the A/C, but it wouldn't go dead. The crank sensor plugs in with one bolt. Now, the mileage has returned to 29-33 MPG. and it starts every time. This said, the video above is great information to know, and was my second plan of action if the problem didn't stop.
Thank you for stopping by the shop
Update: I am still having the issue but infrequent. If I turn the key and the check engine light does not come on, I will remove the key for 20 seconds then it will start. I will replace the ignition as Jim's post above indicates. That's gotta be the problem.
M. Davis Intermittent problems are very hard to pin point. Thanks for watching the video.
Hey Jim, Very good video! I have a 1999 pontiac grand am and I have a twist though! When I shut the car off it stays running? I changed the back of the switch like you did, but still same issue!! do you think its in the tumbler itself? The key does'nt work unless you move it around when you start it, you have to apply gas or it wont start! The battery light stays on and now the airbag too and the fans to the cooling system stay on till it drains the battery. Also the parking lights are on too!! The only way i can shut it off is to pull the coil wire each time i drive it, not sure what else it could be. Any help would be great!! Thanks and so far you have the closest video to whats going on with my car.
Jim I have a 1995 Pontiac transport minivan it cranks but takes a while for it to turn. On
Hey I have the same issue with a Chevy classic replaced the ignition switch started car set a few hours car won't start. Put my scan tool on not getting a ignition switch voltage or a fuel pump voltage. Pump is brand new car sits over night and starts checked fuses and relays switched with different ones no check engine light no security light. Any suggestions?
I have a question I have a 2001 chevy blazer 4×4 I have change my oil and snap the bolt but the thing is the spyroll of the bolt was still in so I tired to extractor it out and it was pushed inside the oil pan so I pushed it to the left side of the pan and put a different bolt on it drove it around for awhile and it dead out so my question is it possible for that spyroll went inside the oil pan pump?
I'm bought and was going to out new fuel pump in today but definitely gonna check this first thank you
Stephanie Pickerel is there any codes?does the check engine light come on and stay on? There is also a problem with the fuel pump relay wiring. Keep me posted
Well I have a 05 impala 3.4 witch I just replaced the engine.i have some of the same problem and also mine will kill a battery.i need help
Thank God … I am hoping this is my issue. My poor baby…I’ll have the mechanic look at this immediately
Hey now I’m desperately looking for help. I had a problem with my truck 04 silverado 4.3 2wd it started stumbling and hesitating after warm up. Threw parts at it to no avail ,TPS,IAC,up/low intake gaskets, catts, ignition coil,icm, while installing new spider injectors I dropped a pan head nut down the intake and didn’t notice upon starting truck everything was fine on rev up it got sucked into cylinder 3 after pulling heads off I found the nut. Long story short where the nut got sucked In coincidently cylinder 3 had a blown head gasket. So that was my problem the whole time so the nut falling in was blessing in disguise because of that nut would of never fell in there I would of never new about the blown head gasket. My issue is now after having the battery disconnected for 2 days the theft system is now activated and won’t give signal to injectors to fire up. Please any help would be appreciated. Thank you.
have a 2004 GMC 5.3 busted radiator truck shutdown how to replace water pump clutch fan radiator natural was bent over but will not start is there a relay that I can switch but the computer shut down to keep it from running hot
Have 2006 chevy up;ander started missing and dying changed coil pack ran good for a few weeks started again. put another coil pack on and nothing. Tinking maybe the same issue put have plenty of fuel.
I need to know how to do a tune up on my 2004 Chevrolet Classic. I would like to see a video about it. I also enjoyed this one, but what is the VAT that you are referring to and where is it. Thank you.
Good question the VAT is the vehicle anti theft. Thanks for watching.
I’ve got a 2000 Malibu and I’ve been having issues with starting it. I can start it at home and it fires up fine drive it 6 miles and leave it for an hour come back fires fine and drive home no issues. Now if I do that same thing but drive 12 miles and let it sit then I can’t start it at all. Cranks all day but no fire. Surges a lot and the other day died while driving
I do a live stream on Sunday night jimthecarguy at 7:00 PM (ET).I will talk about what to check.I hope you can stop by.Let me know in the chat if you do.
Hi jim,couple more guestions if you dont mind. First yes the truck run great before installing new steering colume,the key is just a key no chip. wondering if im to have the battery hooked up when doing the procedure or not? how do i tell what kind of anti theft i have? all i did was change the whole steering colume and everything plugged right up the same it just wont stay running. is there anyway to bypass the antie theft? really really appreciate all your help. Thank you so very much. Melissa
+Melissa Raymond Even though the key does not have the chip you will need to do the relearn procedure I sent you in order to get it running.It does have the security system call passlock
+jimthecarguyq q
+Melissa Raymond ?
I have a 2004 Chevrolet classic Malibu that have that exact problem. I really can use some help
i thought this was an excellent video. very thorough explaining and easy to understand.
Thank you Henry.Do you believe jane shure what a knuckle head.Lol
Jim the car guy what if u have already put a fuel pump in and ignition switch with new keys and still don't fire up I have every light in my car gas tank says it on e it full temp down to 100 every light still on no radio and anti theft light still on I have a 01 Chevy Malibu and I am struggling I need help
Great video. I'm having this problem with my h3 right now. Still trying to fix it.
+Leading Edge Aerial Productions Good luck .Keep me posted.
I have exactly the same problem with the same car. I will be focused on the ignition switch now. Thank you
I have 2014 Chevy Spark. Was running great Next time I got in no click no start no lights BUT when I manually locked doer the locks bounced up n down. Also just sitting in it I could hear a humming. Maybe air conditioner. Step on break humming stopped. Just sitting in car a could lights came on The blue light at bottom of radio also blue light where light dimmer is. Odd lol
im having the same problem with my 2002 astro van when i first get in and turn the key the engine light is there when it checks. if i turn it over and then turn it off. then try again there is no engine light. would this be the same problem??
Great video and I hope this will help me with my 03 malabu it starts but dies about two seconds after I started it, my wipers and blower motor and power windows are the only thing that works in the car the rest of the shit don't work, been working on this car for five days now trying to figure it out. Thanks p.s. my thrift system light is on and we can not get it to clear out.
Joe Mcmillan Do you have a second key to use?
Joe Mcmillan im having that problem now myself i changed out my lock and lock housing car still shuts off after few seconds even after i did the 30min relearn process. still no luck need help?
I'm having the exact same issue... hoping this is the fix and that it's not something more complex I have a 2003 chevy malibu ls with the 3.1 v6
Let me know if you need any advice
I appreciate it man
I'll be in touch
Having this issue with my 2005 GMC Envoy XL. Doesn't always act up but when it does the engine cranks but will not start. Works fine most of the time then here and there it just will not start.
I'm having kind of the same problem I have a 2003 Chevrolet suburban I tried the resetting prosses but now it won't do the trick it won't start now it cranks but won't start it has the check ingine light on and the theft light I have taken it to a mechanic they can't find the problem could you help me figure it out thanks