ฝัง
- เผยแพร่เมื่อ 8 พ.ค. 2018
- 🔵PLEASE LIKE & SUBSCRIBE 🔵COMMENT BELOW
🔵 / joshyodenn
🔵[SOCIAL MEDIA]
🔵 = / joshyoden
🔵= / joshyoden-158441003833...
🔵= / joshyoden
🔵= / joshyoden
🔵[DONATE]=www.paypal.me/joshyode
🔵[SEND STUFF HERE]= PO BOX 336, MIDDLEBURY, IN 46540
🔵[Disclaimer] THANKS FOR WATCHING!!
Joshyoden cannot guarantee against improper use or unauthorized modifications of this information. Joshyoden assumes no liability for any property damage or injury incurred as a result of any of the information contained in this video or any information on this channel. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the responsibility of the user and not Joshyoden.
{I HOPE THIS VIDEO HELPED YOU}
Please comment with any questions! - ยานยนต์และพาหนะ
Before replacing my fuel pump! I tried your method and I have to say thank you very much my truck is back at work, again thanks for your video
@@Joshyodenn just stopped running again,damn it
Spent last 2.5 weeks trying to fix it... Read every forum and watched every video.... THIS IS THE ONLY ONE THAT FIXED IT THANK YOU SO VERY MUCH
This video saved me to, was just plowing this morning and truck stopped needed a quick fix watched this vid and instead of cutting wires I got a piece of mig wire and put it into the clip holes to complete the circuit, then re learned the ignition same as vid and it works evertime now thanks again !!
I have a 2002 Avalanche I followed the procedure in the video it worked great thank you man I owe you the world
Thanks dude! Worked great on my 2007 chevy 1500 classic work truck. 4.3 v6
Jake I have the same truck. Mine would stall 2 seconds into cranking a couple times and then start up. My airbag message would come up as well. What issues did You have?
Thanks , it works. They broke into my truck and screwed with ignition. Had to drill lock out and wouldn't start with new cylinder. Great vid👍
I hope this is a joke because the guy is just tryin to help people shouldn't blame other people for your problems 🤷
@@patrickvandiver1873, Re-read the comment. He put a new cylinder in AFTER they broke in and tried to steal his truck. This fixed the problem for him and he's thanking OP.
I have a Chevy Express van 3500 2008 and I believe it's locked from anti theft but this is exactly what it does I'm going try it out thanks man
did this work for you?
Dude…….. this actually works !!!!! Did it 3 times was ready to give up then finally in the 4th time cranked right up thank you !!!!!
Just did what he said step by step and dammmmmmm it.....it worked....tow truck was parked for 6 months...started like a champ....thank u sir very much...time to go make moneyyy....
I’ve been dealing with my truck doing this to me for seven years and finally I figured out to change out the key and now I have no more problems
So just get a new key made??
@@WickedLoco-bc9pl probably the whole tumber assembly
Thanks ...a simple fix compared to all the others I've seen. .just took a min to get to it..lol
Your the man👍,you were right on the money with the instructions. Third try to start fired right up. Thanks. P. S. If I ever run into you I'm buying
Love yo life mane this video done helped me out soo much, I did what u said to the T and it worked - 2003 GMC sierra 1500
my 06 is back to life 🙌🏾 thank you great info
What if my security light isn’t staying on or flashing during this process? I’ve tried it multiple times and still won’t start. I replaced the relays and fuses. Battery is good etc. solenoid is good. Just won’t start. It was working fine and then the same day it just wouldn’t disengage
Does the engine turn over?
Thanks this is so helpful going through this problem in my 99 suburban
Holy shit this worked. Tried this one more time right after I called a tow truck to take my hummer to the show. The main key is to wait until the security light shuts off before you turn the key off for 10 seconds. The first cycle it went off after 9 minutes. The second cycle it took over 11 minutes. Truck started right after that!
For reference, it's actually a PASSLOCK-II anti-theft system on 1998-2006 (2007 Silverado Classic also), not PASSKEY-3. PASSKEY-3 is a transponder type system.
100% correct & Passlock 3 is even worse. Thanks GM 12+ year old trucks stall & won't restart because of lousy electronics.
I have 05 its passlock 3
@@justinpeasley5529 what did you have to do?
@@caintgitriteexp9342 i ended up finding a 12v 1k ohm resistor i cut the yellow kept the black in place then did a program steps with out a scanner its been working perfect
@@caintgitriteexp9342 leave the black wire attached cut the yellow put the resistor on the yellow the other side of the resistor goes to black just strip the black and attach
This worked great! Thank you so much. I did it with my battery disconnected and it started right up without having to do the relearn process.
I did the two wires together method today. It worked the first time. This vehicle was a 2000 chevy 1500 silverado. The security light is in the info center and not a dedicated lamp. The security light would alternate blinking 5 times then the battery light would flash on then solid for 5 seconds then the security would flash. It did that for ten minutes then the battery would stay on. Then i would cycle the key after 5 seconds and before 10 seconds. Did that three times. Worked perfect, the security light stays on all time. Dont care about that. Thanks
i got the same truck had same problem tried the 10 minute wait 10 second 3 times thing 3 times didn't work till i just random like 14min wait 20sec them 17 min wait 26sec then 15min wait 30sec worked then
One isn't working
Ill just buy a ford!!!😔
Did you think it'll work if you've had the ignition changed?
Do you think it'll work if you've had the ignition changed?
Thank you....my gmc 3500 dump truck is back on the road
I have a 06 Chevy Silverado 1500. Tried cranking the engine, nothing. I’ve been having issues with my ignition lock cylinder. It would start after multiple times. I hope this works
If you put a resistor in with yellow on one side and black on other side of resistor will work and no theft light
you can also use a variable resistor between the black and yellow wires .
Would this mess up the after market alarm? Or would the alarm be the cause of my truck not starting I replaced the key switch but still happens?
Thank you sooo much bro me and my dad were stuck at a friend's house and this happened to us we watched your video and this tutorial worked you just earned a new subscriber
99 gmc sierra 4x4 message board light stays on says security,while truck is off with key out. If unhook batt cables hook back up its off,but same problem after drivin.
So after connecting two wires does it matter if the plug is in or out for the bypass to work? I haven't tried it plugged back in yet so the red wire is connected. My alarm won't quit going off even after disconnecting the + battery for a while???
i have another question i just bought 2006 chevy silverado and when i turn the key it's completely dead. If it's the immobilizer would the car try to crank but not start? or would it just not start at all? btw sometimes the vehicle will start on the first turn, sometimes my spare key will work and other times i have to put a battery charger on it well i do 3 10 minute reprogam and even that doesn't work on the first turn. The car battery is also 3 years old but i have charged it up and it always show on my multimeter over 12v the alternator is good too.. I'm kind of at loss; it just does not crank just nothing except the fuel pump will come on and the radio and dash lights come on. I don't hear any click click click from the starter so i don't think it's that. My biggest question here is does the immobilizer allow the car try and crank over or will act like a dead battery?
It worked on my 01 duramax. Thank you!
New rockies makes bypass box. Check key with ohm meter to get resistance value for resistor.
True that brou
Thank you i will try this i have a 2000 Cadilac Escalade that will be a sickly start and run when it wants to and I'm tired of it and I'm ready to go I want to go
my truck is doing something very similar my electrical system will not work also will this fix the electronics
For this issue...do the symptoms include a start momentarily or just a click?
Thank you, this is right on the mark for a 2003 Chevy Trailblazer. Worked just like you said it would.
Hey everyone ! What if my vehicle will crank but has no spark ? Motor turns over but no spark out of coil? I’ve tried everything but a ECM!
Did u end up plugging the red wire back in ?
What if the light doesn't flash until you 1st open the door, then you start the relearn procees without flashing light
Dyam thief phuked my ignition cylinder, luckily couldnt steal the truck. Did this pricedure 6 times, finally worked when I waited the Full 10 seconds instead of 5 secs. Overall, my truck runnin again. Thank u sir
Did u connect the black and yellow or did u use a resistor
@@elbambinomaloso189 Black and Yellow wire still wired together right now. going to leave it like that. Trying to put together a Steering Wheel quick disconnect so it will cause them not to waste their time trying to steal this truck.
I have a '03 Buick Park Avenue, I had to change the steering column a couple of months ago, had the security system reset, and all was good, then two weeks ago I went to town and when I shut the car off the flashers came on, cranked the car back up flashers went off. I manually turned on and off the flashers and they appeared to work fine, turn off the ignition and they come back on. I got into my dash and found my ”dual purpose” flashers and replaced it, nothing changed. So into the underhood fuse box and removed HZD fuse, and no flashers period but, then I noticed the taillights were on while the light switch was off! Now I'm thourghly stumped. Any suggestions? Thanks
Gotta 2002 Tahoe. Just did it. Works Great! Thanks bro!
Thank you very much. I/ll keep this in mind. I have an 02 grand prix. and will try it one day if i ever have to.😁
I have a 2004 Chevy Tahoe 4.8 the problem that I have is a “REDUCED ENGINE POWER” I’ll be driving it and out of no where I loose speed and power. Forcing me to pull over I then turn off the engine for a couple seconds then it’s running again but then it
Keeps on doing it again. Please help. Thank you
I did this fix on a 2007 GMC 1 ton van. I left wires unplugged from ignition after soldering. Did the relearn and the van started. Security light is still on but is not bothering me as long as this fix is permanent. Thanks for the video.
Just did this with my 06 Silv and have the same wonders of it being a permanent fix. Has this worked out for you?
Was this a permanent fix?
Please help I didn't see how you rewired it I disconnected it but not sure how to rewire it where do I wore the black and yellow wires to after connecting them together
Do you leave the sensor with the red wire plugged in
Just had a new key programmed today but now it's not working again and antitheft light is back on. Hoping this works
Thanks for the video, this worked and the truck runs again!
Tried this on Saturn vue 2006 and it worked fine, thanks
Wow thks been lookin for awhile ya got this thks for sharing putting this harness in 1947 Dodge Water Truck 6 litre have to have Harness So won,t start with out this been told keep ya posted Farmer
You don't actually need to know the resistance but instead the voltage. Remove the starter relay and measure the voltage across the wires when trying to crank. Install a variable ohm resistor and adjust the resistor untill the voltage matches.
exactly
What about everything in the interior dies or it won't start? These are my symptoms.
1. Driving along and everything inside the car goes dead but the Tahoe keeps driving.
2. I make a hard left turn, and everything comes back on but then dies out again.
3. One day the starter would turn over but5 wouldn't start. Everything inside is dead.
4. Remembering the left turn deal, I put the key in the on position, everything still dead, I opened the door, grabbed the edge of the roof and started rocking the truck. The interior lit right up, and the radio came on and I was able to start it.
5. The problem would resurface.
Do you think it could be a motion detector that is acting up? I have a blank key that will start the engine. Has the previous owner disconnected my security system?
Yeah I rewired it an it stays on imma order new VAT module hope that solves problem
Thank you very much!!! I was just going to start buying different stuff it didn’t need! Thank you very much!
How do you know if the truck has passcode 3. Is there a code in the glovebox
I am trying the reset but sercurity light did not go off or flash after 10 mins help
I have a 2000 Buick Park Avenue Ultra the security light stays on but it'll run and drive for 20mins until it acts up, can this work for me since I have passlock 3?
Do I need to plug harness with the 1 wire ?
Did this a couple of weeks ago and a week later it had the same issue. I turned the key on and left it for 10 minutes but still wouldn't start. I cycled the key 3 times and then it started. Hoping that was the trick.
Were you able to get it fixed? Just did this to my 1999 Chevy c/k1500 yesterday and it started up great, came out this morning and it’s back to its old problems.
Do you hav to do a relearn wen u disconnect the battery?
What passlock does mine have? It's a 98 blazer. It has a new ignition switch, so the keys are not the original.
So far my truck is running again, thanks
Will it work on my 2007 chevy colorado dash looks diffrent in mine
Also my securitty light red not yellow
I cant even turn my key. I tried to pull the little roller thing out and start it. Still start then immediately cutoff. Im lost. Will this help the key turn also
Thank you for this video, worked on my 03👏
Ok did this but my security light isn't turning off during relearn.... 2006 envoy
Definitely helped resolve my issue 100%! Thank you!
My 01 Silverado cranks but wont start
I put a new fuel pump & wasted 400 and still it doesnt work
So i turn key and gas gauge
And others dont move at all
After twisting the two wires together, do I reconnect the plug or not?
THANKS for your video my friend.
Works for me at the 3rd time 2007 silverado classic 4.8 my security light was on solid but truck was running fine and then all of the sudden start for one second or two and died, i just jump those 2 wires and did the relearn procedure and it worked, thank you very much.
I just replaced everything (key lock cylinder, housing, and ignition switch) the security light never came on and it turns over but won't stay on. A few days ago i stopped at a gas station and when i went to leave the light came on, headlights and radio turned off (i eventually got the head lights on by playing with the toggle but when i got home and turned it off and back on it was like nothing happened. Now it does the same thing again (turns over but wont crank and stay on, it sounds like the fuel is getting cut off.
Is the security light coming on now?
Check to see if there's fuel pressure by the engine there should be a bleader valve on the fuel rail
I figured it out Thank you
It works I was skeptical about it but you prove me wrong
Thanks for the advice I'm about to try it out on my 99 Tahoe...
Will this method on a 98 Honda I lost the keys and put a new key ignition and it still won't start
Did it work I seen you posted on another video also witch one worked out
I did this work great but now fuel pump won't stay running unless manually grounded out
That definitely would help someone... good job
Thanks for watching.
I have a 2009 avalanche, would this method work?
Frikken amazing Thank you so much..5 years ago and saved me a fourtune.
Thanks buddy you saved me a lot off money it works 💪🏾
My security light stayed on after relearn from replacing the housing and cylinder on an attempted theft on my truck. All i did was unplug the battery for about 5 minutes and it turned the light off back to normal
Mine starts and dies right away but I have no codes and no security light. I already replaced the pump and fuel pressure regulator.
Any update
will this work on a 2008 chevy silverado?
Tried it and it still stalls any suggestions
Not sure How old This is but If you're still doing it keep doing it I was quite Impressed I can tell your going to be successful
I've a 04 Caddy Deville. The ignition lock cylinder wouldn't allow me to insert the key. So I bought a new cylinder, now I need to know how to bypass the passkey 3 system so I won't need to re program the key.
Similar situation where my 2002 Silverado key cylinder is jammed up. Since you could not turn to the start position to remove it with the "pin hole depress", did you just drill it out to replace it? Any help is appreciated!
@@rickwhitfield4682 Yes. I finally took a drill and that is how the key cylinder came out?
Hey so my truck tries the momentary start and dies. But my theft light doesn’t come on or flash after. Also none of my gauges or tuner read anything. Power door locks stopped working and radio doesn’t turn on. This all happened at the same time. I’ve tried a whole bunch of things. Any chance this could cause that other stuff. Or does it just cause the cranking
Yes
Good information Thank you God Bless
2003 chevy tahoe z71 trued it but doesn't crank or anything i have an aftermarket key I haven't tried the wire process just hoping it works if not what is another tip u could spot me would truly be appreciated
Did it wotk
My 2000 Chevrolet 3500 also did this I tried this but it wouldn't work my light never flashes just stays solid and suggestions
Mine does the same thing
Worked amazing my LBZ is running like new again
Trying it on my 03 Tahoe now. Man I hope this works. Third key turns a charm. Hopefully
How did it go
I have a total of four wires. Not three. Will this still work?
What did you do with the red wire ?
My stater good. And battery good. Ive got power inside. But it wont start. What could be the promble. Can someone please help 2005 Chev Tahoe
Well Gonna Give this a shot after spending $600 on an entire fuel system lol I’ll keep yous updated
do this work on chevy monte carlo 2000 because it have same wires
Me too, I followed your instructions but my security lights are not turning on, do I continue with the reset anyways?
What did you end up doing
My security light has gone out, but no start...do I still do the relearn?
03 Silverado cranks but won't start. The security light goes out quickly after turning to on. I think truck is not sensing the key? What could it be? Thanx, RC
If the security light isn't staying on or flashing, then there's probably an engine problem or fuel pump problem, first try switching the fuel pump relay with another relay that has the same numbers on it ,make sure you have fuel pressure by the engine there's a bleeder valve by the fuel rail, check oil level
If it weren't sensing the key then the security light should stay on or flash.
I got a 03 Yukon xl and when I put the key in the ignition the horn just stays on, idk what to do. Any help?
Swap out your horn relay
Thank u so much. Good job. I think the problem with secuty ligh is.... two wire ever conected. Try with relay to ignition on.
Hi already do this on my 2000 Sierra but still fail doesn’t start what can I do ? Please help
Try the crank sensor. Just did this video, and still no start. Reader kept saying o2 sensors. But it was the crank sensor.
Will this work on a 98 Chevy truck Silverado