50cc scooter carburetor install

แชร์
ฝัง
  • เผยแพร่เมื่อ 20 ต.ค. 2024

ความคิดเห็น • 80

  • @danieldasilva3068
    @danieldasilva3068 2 ปีที่แล้ว +2

    Finally an amazing video on the exact scooter I own. Thank God I found this. He explains everything so well and shows the work so clearly. Great job I’m subscribing.

  • @jimcordray8935
    @jimcordray8935 4 ปีที่แล้ว +4

    Thanks your videos are always thorough but immediately too the point and easy to take in thanks for what ya do

  • @alfredo372
    @alfredo372 4 ปีที่แล้ว +9

    The best tutorial on TH-cam brother thank you

    • @robertmotion
      @robertmotion 8 หลายเดือนก่อน

      still true in 2024.
      /Bklyn👑

  • @claudiaberaldi2916
    @claudiaberaldi2916 2 ปีที่แล้ว

    Finalmente un video chiaro per il montaggio del carburatore!!! complimenti!sei bravissimo!!

  • @jmilitant
    @jmilitant 6 ปีที่แล้ว +9

    Very thorough and nice camera angles. Thanks

  • @noot7109
    @noot7109 5 ปีที่แล้ว +11

    Thank you for posting this carburetor install and the uninstall video. You helped me install my new one :'D

  • @SoralTheSol
    @SoralTheSol 6 ปีที่แล้ว +5

    Thank you! Now I can fix my scooter....
    As long as the problem is the carburetor. I really hope it is.

  • @FullTimeEuphoria
    @FullTimeEuphoria 2 ปีที่แล้ว

    Hello! I have a Buddy 50 cc scooter. It runs great except for sometimes it hesitates a little in the sense that it will turn off at strange times when I am going lower speeds or it will not turn on..
    In order to get it to turn on I carry a little screw driver and carb cleaner and I will take off the air filter cover and spray the intake with carb cleaner and put it back on. Then I go to start and it starts VERY good.
    It was just brought to a shop who charge like $200+ for a carburetor cleaning and spark plug replacement.
    The shop is called Boca Scooters…
    I am NOT convinced that they did honest work but I don’t know know for sure.
    I would like to have it turn on normally. (without having to have to spray the carb cleaner every time)
    I believe that I need to work on the carburetor again or get replaced altogether OR get a valve adjustment. I would like to bring it to a different shop but I don’t know really where to start.
    Gas is clean, premium used (50CC 2018 Buddy)
    Carb JUST got cleaned but NOT positive they did honest work……..
    Spark plug all new.
    Where should I start from here?

    • @jaydensmith5643
      @jaydensmith5643 2 ปีที่แล้ว

      That was way over priced work. Spark plug cost 5 dollars and took 2 minutes to change. And carb clean took them no longer than 20 minutes. I wouldn’t go back to them.

  • @SegaDisneyUniverse
    @SegaDisneyUniverse 5 ปีที่แล้ว +3

    Wow, very rare to see repair tutorial videos of Peace Sports 50 scooters, as I have the same one! Least I now know how to replace my carborator. I may need to replace my fuel line because I see gas leaks below my carborator. Especially when I had my scooter upgraded to a 100cc.

  • @MrBerenguer67
    @MrBerenguer67 3 หลายเดือนก่อน

    Thks four your excellent video I have a Vespa Lx 50 my carburetor drope a little petrol from the bolw if I remove the carburetor to change the tray is not out of tune

  • @David-yh5po
    @David-yh5po 5 ปีที่แล้ว +2

    Thanks for sharing this video.

  • @SuperIamIrish
    @SuperIamIrish 2 ปีที่แล้ว +1

    🙃Where does the vacuum line go on the carb?

  • @JoshSparky1990
    @JoshSparky1990 11 หลายเดือนก่อน

    Hello, I have a 50 cc Jinlun. Similar to this, but it had a sheetrock screw instead of the idle screw. I took it off. It dosent die or anything, the idle is a little bit high but not to bad. Like if I stop and don't hold the break it runs forward a bit. If I put out kick stand and let it run, sometimes it wants to take off a bit. I'm sure previous owner has it tight somewhere. Some people say if moped idles high that it can ruin the motor in long run or etc. If I was to put a screw on it, all it'll do is make it rev higher. So in this case does it really matter if I have it on or off? The idle screw. Thanks in advance.

  • @jgrinnell7431
    @jgrinnell7431 ปีที่แล้ว

    Hi great vid I followed , myn starts up same carb as urs , Prety much first time , but I have no air filter and fuel leaking out of exhaust , and I still not sorted the idle , but will adjust the idle like you say , but will the idle sort out the mix ratio to?😊

  • @zacharystevens1706
    @zacharystevens1706 3 ปีที่แล้ว +1

    what is the other line thats on the same silver part the fuel line is at? theres three lines and only two spots on the carb....?

  • @ReddMan_17
    @ReddMan_17 ปีที่แล้ว

    Best vid. Thank you.

  • @hydarmbm3456
    @hydarmbm3456 ปีที่แล้ว

    Hi. What is the difference between carbs with metal top cover and the ones with black top plastic cover?

  • @DRAGNET-pn5vf
    @DRAGNET-pn5vf 3 ปีที่แล้ว +1

    LOOKS GOOD, THANKS. 🇺🇲👍

  • @bumpintheG
    @bumpintheG 3 ปีที่แล้ว +1

    ❤️❤️❤️Thank You JJ!

  • @aurasas2320
    @aurasas2320 4 ปีที่แล้ว +1

    I lost my engine, this helped a lot

  • @chasebrunner
    @chasebrunner 3 ปีที่แล้ว

    The very bottom hose is a drain and the line above the fuel line is a drain as well ?

  • @belindasilva6277
    @belindasilva6277 2 ปีที่แล้ว

    Need to know I wanted to know on my carburetor on a 2020 Tahoe moped you put the fuel to the top one or the bottom one fuel line

  • @elfriendly139
    @elfriendly139 5 ปีที่แล้ว

    i learned a lot from this video thank you so much

  • @gabebourgeois3
    @gabebourgeois3 2 ปีที่แล้ว

    What about mixture screw do you have to adjust that?

  • @robertmotion
    @robertmotion 8 หลายเดือนก่อน

    this is great information. and great tutorial.
    /Bklyn👑

  • @luanaesposito1482
    @luanaesposito1482 8 หลายเดือนก่อน

    Where did you buy the carburetor from

  • @kevinthorn9672
    @kevinthorn9672 4 ปีที่แล้ว

    Ok i just put a new carb in and it wont turn over by kick or electric start? Only when i throttle it, it will come on but it will die? And wont stay running ?..after a while trying to get it to come in now my eletric start is sounding weird and wont click?? Making a diff noise?

  • @someguy5162
    @someguy5162 4 ปีที่แล้ว

    I got a buddy has the ice bear 49 cc it stalled on him now no start Its not gettung spark we weak spark very can t see it on plug spark but I got lil shock but not much the cdi box does it have to be one for his bike or will any 49 cc one work

  • @tommygoldie655
    @tommygoldie655 ปีที่แล้ว

    Is there a button for the choke somewhere?

  • @raulzayas9292
    @raulzayas9292 2 ปีที่แล้ว

    Thanks 4 the video

  • @brianboyd8882
    @brianboyd8882 4 ปีที่แล้ว

    On the VIP champions moped, where does the tube go that's located near the crank shaft?

  • @williamschueren9926
    @williamschueren9926 2 ปีที่แล้ว

    A new tao 50cc ...only 150 miles...it runs 30 mph...and sometimes 38 mph....seems like it takes off very slow...any suggestions...I have cleaned carbs b4...haven't tried nothing yet

    • @trevorlove4735
      @trevorlove4735 2 หลายเดือนก่อน

      Instal better carb, and open exhaust

  • @bobpatterson6897
    @bobpatterson6897 4 ปีที่แล้ว

    Hey bro I got one of these mopeds,I out a carb on it but it didn't come with fuel lines so I got new ones I just am not sure if the routing. Can you help

  • @lawrencesmith7478
    @lawrencesmith7478 5 ปีที่แล้ว +1

    2008 50cc scooter. Won't start. Replaced spark plug. Good spark. Replaced carb. No gas to spark plug. Checked vac petcock. Good. Checked flow post-filter. Good. Any suggestions?

  • @maxajm9111
    @maxajm9111 4 ปีที่แล้ว

    Hi, I have a question, how does your fuel flow and air works? Does your pump goes directly to airfilter and only fuel goes to carb? Or how?

  • @paulsp2693
    @paulsp2693 2 ปีที่แล้ว

    Other idle screw on side not adjusted?

  • @RVMBO5K
    @RVMBO5K 6 ปีที่แล้ว +2

    Very Helpful.

  • @imremolnar9004
    @imremolnar9004 ปีที่แล้ว

    How and to what size do you set the float

  • @ThomasRose-po6lz
    @ThomasRose-po6lz 4 หลายเดือนก่อน

    On a 50cc motor how do you prime the motor

  • @SMRG1000
    @SMRG1000 5 ปีที่แล้ว +2

    Thanks i solve my problem

  • @reginaldb.campbelljr.7451
    @reginaldb.campbelljr.7451 ปีที่แล้ว

    Good video

  • @69station
    @69station 6 ปีที่แล้ว

    I feel like theres a conspiracy against me i cant figure out what the BOWL DRAIN LINE connects to. Plz reply. I took the bowl off the carb without removing it from the bike trying to be fast but i accidentally removed the 2 lines that the bowl is connected to what do i connect them to. Im assuming the one connects to the carburetor and the other is the BOWL DRAIN LINE but i dont know what to connect that to

  • @lwalk6328
    @lwalk6328 3 ปีที่แล้ว

    Hey JJ just bought a new carburetor installed it and it still wont start im puzzled about what im gonnado next

  • @roybray8741
    @roybray8741 3 ปีที่แล้ว

    I put a new carb on mine but I put a 1/4 lines for fuel and vacuum someone said prob to big for it

  • @1awesomeadventure481
    @1awesomeadventure481 3 ปีที่แล้ว

    Is that a panterra freedom

  • @kevinthorn9672
    @kevinthorn9672 4 ปีที่แล้ว

    What size of wrench do i need to unscrew that ?

  • @unbeatableuser7310
    @unbeatableuser7310 7 ปีที่แล้ว +1

    i need help with my bike its a honda elite 49cc it only goes 35mph but it wont start barely works i need to know how i can get to the carborater anf which carb will work for my bike

    • @jimcordray8935
      @jimcordray8935 4 ปีที่แล้ว

      Just go where they sell your make and model let them know what ya need but most the 50cc for what was in the video are all the same just line her up and to it one connection at time until its swapped.....hope that helps...peace out

  • @PatHaskell
    @PatHaskell 5 หลายเดือนก่อน

    I missed where the fuel and vacuum lines attach.

  • @gregmeeks2753
    @gregmeeks2753 4 ปีที่แล้ว

    what does it mean when scooter will idle but as soon as you give it throttls it cuts off ? thanks for any ideas.

    • @jaydub5039
      @jaydub5039 4 ปีที่แล้ว

      GREG MEEKS you need a new carb

    • @gregmeeks2753
      @gregmeeks2753 4 ปีที่แล้ว

      @@jaydub5039 thanks...ordered.

  • @akulmonkel469
    @akulmonkel469 4 ปีที่แล้ว

    Is the same procedure for 150cc

  • @matthewmullins1392
    @matthewmullins1392 5 ปีที่แล้ว +1

    My scooter will not run properly without the carburator being tilted to the side

  • @augusteking9238
    @augusteking9238 2 ปีที่แล้ว

    what carb is it

  • @marshalmagooo3899
    @marshalmagooo3899 5 ปีที่แล้ว

    Nice job

  • @therealcomediancandylady79
    @therealcomediancandylady79 7 หลายเดือนก่อน

    You lost me at the throttle cable. Who said the camera person did a great job. 😮

  • @shanemahler6830
    @shanemahler6830 6 ปีที่แล้ว

    My 80 stalls out after about 30 seconds, plus I think I'm getting gas in my air filter, will the mixture screw help fix these issues?

  • @Truereligiontreyy
    @Truereligiontreyy ปีที่แล้ว

    😊

  • @petercriscuolo3140
    @petercriscuolo3140 2 ปีที่แล้ว

    Hey JJ.

  • @therealcomediancandylady79
    @therealcomediancandylady79 7 หลายเดือนก่อน

    Jezzzz ...... your hand was in the way, for the throttle cable.😢

  • @calvinharrison7088
    @calvinharrison7088 3 ปีที่แล้ว

    Where is the battery

  • @dongerramarco9617
    @dongerramarco9617 4 ปีที่แล้ว

    50cc scooter carburetor install 7+ minutes

  • @robertoantunez21
    @robertoantunez21 5 ปีที่แล้ว

    Ok.

  • @kevinthorn9672
    @kevinthorn9672 5 ปีที่แล้ว

    Heres my story i just bought a 50cc scooter boom scooter wont start put new oil in it put 87 gas in it changed the spark plug, still wont turn over to start? Company sends me a new carburetor? If its new how the fuck is the one on it broken ???? Im so mad at the powersports max they dont even refund you your shipping charge which is 200$ really complete scam with a 50cc scooter ill just buy a damn motorcycle

  • @yevgeniylitvinov3365
    @yevgeniylitvinov3365 ปีที่แล้ว

    probably doesn't even start

  • @majortom7013
    @majortom7013 2 ปีที่แล้ว

    0p

  • @timr617
    @timr617 6 ปีที่แล้ว

    You dummy you mean tighten the other nut not the one attached to the cable itself

    • @suddenturnforthebest2282
      @suddenturnforthebest2282 2 ปีที่แล้ว

      3 years of silence for that jackass comment, i think that's about what it deserved..