ฝัง
- เผยแพร่เมื่อ 17 ก.พ. 2023
- Horizontal tig welding root pass on carbon pipe. TIG root pass, using dip and constant feed wire technique for root and hot pass. In this video, I will show you how to place a good solid root pass on a horizontal joint. The horizontal weld can be very tricky especially when you just starting off. Here are some tips! Hope this helps!
#tig #tigwelding #tigweldinghorizontal
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
My videos are recorded at working sites in various locations and welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my TH-cam channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
/ x3mtig - วิทยาศาสตร์และเทคโนโลยี
I think you are the GOAT of tig youtube
Yeap, this man is up there! Top 50 world wide! He’s blessed as he should be, he’s applied himself, as we all should! God bless you sir!
Ovaj kanal postaje jedan od najboljih..Covek pokazuje sustinu,u terenskim uslovima i sve to prati odlicnim uputstvima!Svaka cast i samo nastavi!
Hvala ti brate na lijepim rijecima, drago mi to za cuti i zaista cijenim to 🙏👍
Another great video, super super informative!!!
Even though now i can finnaly mach your root with no visibile "grapes" ,in this 2G possition, the video is still very helpfull to me. On 12:30 you mentioned about diferent wire feeding techiques. That sound so intriguing to see, if possibile some day in the future?
Thanks for the awesome work and knoweledge sharing 👏
Hey brother, thank you! Yeah, as I mentioned in the video, I’ll make another one with different techniques, more demanding techniques! Soon 👍
learned more from this 14 min video, than my 3 weeks of carbon steel 2g high pressure class. Thank brother, wish I found this earlier.
Odlicno buraz!! Korijen izgleda super, uzitak za gledat kak varis!!
Hvala ti buraz! 🙏👍
Hello, have a good weekend, thanks for another video! I am in Finland now, we fabricate hockey rink freezing systems. Mostly all piping is stainless 2mm thick, no xray or whatsoever. We mainly use stainflux paste to protect root instead of argon purge. Weld puddle behaves better than without purge but still not so good
Hey DM , thanks for your comment bud! Sounds pretty cool 👍 it’s always interesting to hear about all different things and projects that people are doing!
Ive not done much tig..you make it look so easy,great video.
Thanks buddy!
Another great video. When I started to tig welding years before I was looking for videos like yours and didn't find something that good. In sure that you helped a lot of young welders. Greetings from France
Great to hear that my friend 👍I appreciate that 🙏
Gotta Burn to Learn.
Love it.
Merci pour cette vidéo et ses informations 🇫🇷👷🙏
You are welcome my friend 👍
Just enjoying watching you weld with such a ease!!🔥
Thank you my friend, your support means a lot to me as always 🙏👍
Thank you for the advice and the great video! God bless you sir!
Great video, perfect root pass!
We all need the same lessons on stainless steel pipes 2G/4G positions!
Thank you a lot for your job! 🤟
I started my first pipe welding job at a refinery a few weeks ago and these videos have been crucial in making the adjustment. Thank you so much for sharing your knowledge!
Happy to hear that, wish you all the best 👊
Appreciate the videos man im in school been having trouble with cold wire and flat roots your channel really helped me alot getting closer and closer to getting ready to test and find a job im sure your videos and knowledge help others as well thans alot
Thanks for your comment my friend I appreciate that, and happy to hear my videos are helpful 👍
I'm TIG Welder.....From. Bangladesh
Man your videos help me so much, I'm finally getting the hang of roots in 6g
Glad to hear that buddy 👍👊
i have a fabrication company in the uk, been tig, mig and stick welding for near 20yrs and i have to say i really enjoy your videos and learn something from them also.... keep them coming buddy
Thank you bud I appreciate that 👍
Perfect video, you make answer for my all question 😊☝️ Respect from Hungary 🇭🇺
Очень полезный контент спасибо вам огромное ❤❤❤
I like your accent man beat teacher on the TH-cam
Super video Master,ajde moze nekad da ubacis video s tanjim cijevima do 5mm ?
Svako dobro,pozz
Hvala ti! Ako bude prilike, naravno!
The 🐐!! 🔥👍🏽
Good video keep it up bro we appreciate 🙌
Appreciate it
Brilliant piece of welding that
Stvarno jedan od boljih videa, veliko hvala što delite svoje znanje i iskustvo sa početnicima. I eXtra naziv kanala.... 👍
Hvala ti puno na komentaru 👊
Nice to see a welder considering the hard work a pipe fitter did for the butt.🤙
thanks you for sharing your knowledge
Odlican video ka i uvik! Znas sta je smisno? Ja dok gledan video, mislim si ka ovo izgleda super, sad cu i ja to bez problema uspit zavarit, kad ono nemogu ni priblizno trefit!!! 😂Ti si genijalac!!👏🏻
Haha, bas si me nasmijo 😂. Oni ovdje imaju izreku; everything looks easy until “you” do it! Ali nemoj da te to obeshrabri, stvar je u praksi, zavari ih 20 pa ces vidit promjene! 👊👍
Привет тебе коллега от сварщика из России,многое из твоих уроков помогает мне в сварке корня,удачи тебе друг. 🤝💪✌️
Happy to hear that brother 👊
In tigging i would tack of coupons then tack filler rod to tack and tap the rod into gap. Between the two tacks i would tap the filler in to the gap and turn up the heat and go over the filler rod. The inside weld would look like a wedding band. Perfect stringer. No under cuts or over penetraction. I found this way it allowed me to turn and burn faster and more effective than working harder putting in the stringer. With the hot pass next, i could turn heat up higher and push my root further in. Man, do o miss those days. I miss the money too. Those were the days my friend.
Beautiful job!
Nice job, I like the way you describe/ worded what you were doing......my tig is air cooled 165amp machine......I'm going to try again. Your right ......burn to learn 🤘
So good.❤
It's very helpful
Love it! Gotta burn to learn!
Congratulations, you work and explain very well... I think the current was a litle strong for the root pass. Let me add that your channel is currently my favorite and will be so in the future. Very nicely, clearly and professionally explains TIG welding procedures in real field conditions. All the best, keep it up
Thanks bud! Usually I go even higher with amps on horizontal!
Da moja greska ja sam pogresno razumio, učinilo mi se da si rekao 150 a ne 115. Upravu si sto se tiče struje, ja obično na ovako debljim materijalima koristim od 125 do 140 u zavisnosti sa kakvim aparatom radim. Radio sam i sa milerom ali ne bih fronius menjao ni za jedan mada to je samo stvar navike i neki moj lični stav. Zelim ti puno sreće i uspjeha.
Nice voice.
It's a good video, my friend.
Thank you brother 🤝
How long since you failed an X-ray? doing my first tests in a couple days, hoping i'll be a welder in near future. Favourite channel on youtube right now.
Thanks bud I appreciate that! The last time I failed X-ray was 2015 doing flux core on 24 inch pipe, in rollout! Machine malfunction caused porosity on the hot pass, it was impossible to see it with naked eye . Since then I always double check my equipment before starting to weld. For flux core only, tho! 😉👍
Have you tried the laywire? 1/8 gap 1/8 filler and crank the shit out of the heat and you just push the rod to get penetration. I can’t ever seem to get it right
Hey bud, of course I did, and that’s what I’m usually doing, but I don’t make videos for show off , now since you mentioned that I might do one 😁👍
@@X3MTIG always so humble 😂if you could break down your process for that, and maybe possibly perhaps an in depth video about keyholing carbon in 5g on the top. I got hit with a closed gap and keyholed and dip with a 3 wire and the root was flush. I don’t keyhole my stainless but I know it’s gonna bite me in the ass when I get on higher alloys. Anywho, great video again man
Good job, 👍😊🙏
Крутые видео мужик!
Good jobs.
Great ideas nice job
Thank you! Cheers!
The best
Ģood job thank you
Nice work if i can weld like this 😮😮😮
Go for it!
do you do a gas purge to prevent coking on the inside
Not really on a carbon pipe, did try tho, but purging only on stainless!
Presque parfait, respect ;
Great one, supply hand position, can we know your secret on that
No secrets here, watch other videos, you’ll discover more!!!
Super
Hie,I would like to see how you connected your Tig torch to the xmt.and is it water cooled.
No buddy, it’s air cooled torch 150 amps
is lay wire technique applicable for root pass? Your video is very informative. Thank you very much.
Yes it is bud. Thanks 👍
Even the pros dip the tip from time to time
Exactly brother
Good😂
Kolay gelsin 🇹🇷
👏👏
Hello. Nice video! where do i find that item you use for checking the gap? it looks useful as hell :D
Hey bud, you can get it on Amazon.
@@X3MTIG yeah, found it! i didn't how to spell it ;) thanks for your videos!
Finish on the wall to stop pinholes
❤..tig..wilding.ok
What means tie inn?
Should make little marks on the filler with wire cutters to see how much wire you’re actually feeding on the roots
👍👍👌👌👏👏
FIsh eye on that tack tho. But she slick
Pipe spesification?
Sch??
Ampere??
6:46 where can i get this ??
why wouldnt you butt the joints together as close as possible?
Handtach kayasha mara ga
Why do you need such a big gap? Why don’t you just have them touch each other? I’ve never welded. Just curious
So I can get proper root penetration.
What ever you have in Mind to do with it Mate.
DONT RESTORE IT !!!
Eeeeeepppppp😅😅
I'm a watcher,!,..fire 🔥 man,.. of Tig welder,.I said always safety 🦺⛑️ first,.before start in work,..👍,..avoid fire 🔥 distance behind,..Tig welder is good,👍,.. safety is always first,.😊👍🙏⛑️🦺
Fire extinguisher,! First,.. be side me,..protict from fire, 🔥.. I'm got it,..🦺⛑️🤭👍😊