DIY - How I Upgraded My Cheap Anet A8
ฝัง
- เผยแพร่เมื่อ 25 ธ.ค. 2022
- I bought this cheap 3D-printer a while back, but I was not happy with the print quality and consistency and noise. I didn't want to buy a new 3D-printer, so I decided to upgrade this one to work perfectly.
If you have any questions or requests, please leave them in the comments.
Man, I’m don’t stop and comment to often. Nor throw out some compliments. I want to say this channel is awesome. I love how your videos a very thorough. The attention to detail is awesome! You don’t just say do this or do that. I did this etc. everything is in layman’s terms. Very well done. Thank you very much!
My Anet A8 is no longer an A8 after all the upgrades it's gone through. It's got a steel frame, linear rails x, y, and a SKR 1.3 board with TMC2209 running klipper. It's no longer an A8, I guess. But this is what I starred with. I changed it to 24 volts, so it heats up in less than 3 min..
Awesome 👏 I still
Have the old classic icon Anet A8 with Acrylic frame, now is smooth with controller & touch screen upgrade SKR1.4 Tmc2209 TFT35. Printing well and very Silent. Seeing your video I may upgrade to metal frame with a bigger bed 300mm maybe go further with Klipper😂. Thanks for sharing your transformations 👍 Weldone good job.
Tnx. Actually I took the whole printer apart, I kept only aluminum extrusions, power supply, lead screws and heat bed . I bought some new components and I was rebuilding and rebuilding until I build a core XY(Voron) machine at the end.😅 But I'm happy that I decided so. I mean I don't think it's a worth to build Anet A8+ from A8. These days you can buy a good 3D printer very cheap.🤔😉Good luck with your 3d printer.
@@martinstach6084 oh thanks for advice, yeah sort of did thought about something different but not corexy(seems complicated) maybe a stationery bed or croXy seems inviting too. anyway thanks again for your sharing. Please do make a video on your coreXy too. All the best to u
Very nice :D your story is very similar to mine, i also bought the printer about a year ago...except my board burned out 1 week after finishing building it and so i upgraded to MKS 1.4, Wasn´t able to get it running and left it for few moths, then i joined 1 year shortened low current electrician studies and i got i working within 4 weeks of starting new school year :D now finished my shortened year and decided to rebuild entire Marlin firmware. and change my 12v heater (and yes i have 24volt power supply :DDD) for 24volt heater, and in future i will probably add bltouch and external mosfet. Am glad that there is more content for Anet a8 Plus, there isn´t much out there. Maybe i´ll make tutorial on conversion from Anet board to MKS 1,4 Just to add another video to mix :DDD
Great video, keep it up.
Edit: i just read that you took your Anet a8 plus apart and decided to build a Voron...Betrayal !!! :DD Just joking :dD
Tnx for your comment.
Yes that's right that I build a Voron, because I didn't like the strength of the A8+ construction. Even if I use BTT SKR2 motherboard +tmc2209 drivers ,24v, I still couldn't be happy with print results.
Stay creative, and good printing! 👍
Nice! do you have plan for the x and z axes?
Tnx. No, I don't plan to continue with this printer. I took it completely apart. I decided to build a "Voron" printer instead.
This was awesome there's not much out there for a a8 plus you should do a main board upgrade I've been wanting to do it all my a8 plus but I'm not very good with this stuff. Or bltouch
Yes, as i have 2 inoperative ones, I will go thru rebuild to become ender S1 comparisons. The Ender S1 is good but orginal firmware sucks.
There is also a nice article on all3dp for the anet.
Wait - That's surely not a regular A8, right? Where's the iconic acrylic frame? What's with the fancy metal one?
Sure not a regular A8, but A8 plus.
do you have a link for the frame please reply back
No. I don't have.
hello i have the same 3d printer so if u pleas send me the link of the 3d printed file you did and also the link of the liner bearing or the nober of it coz mine is making a big noise 🙏
Hi. Sorry, but I don't have any links of the 3d printed files. I just designed it with Fusion 360. But it's good idea to upload all STL files on "Thingiverse". I will do very soon so you can download it. The link of the linear bearing or "the nober" you can find on amazon or aliexpress. What ist the "nober"?🤔
@@martinstach6084 Ahoj, mohly byste někam uložit *.stl soubory na díly tištěné v tomto videu? Mám Anet A8+ a rád bych ji takto vylepšil. Díky předem !
@@zdenekmach8061 Nech sa páči, tu je link: www.thingiverse.com/thing:6409397.
@@martinstach6084 Děkuji moc za rychlost! Jdu tisknout a přeji mnoho zdraví a úspěchů v roce 2024 !
www.thingiverse.com/thing:6409397