I always use barebones been using it since it came out I use it on my frame it turns it black after it sets on their an dries up i never knock it down it last a long time
Undercarriage care is vital out here in the salt belt, blows my mind how people are so negligent of cleaning their vehicles. All you gotta do to prevent rust is clean your car.
Along with the ALL CLEAN+ ALL PURPOSE CLEANER, a also use a PRESSURE WASHER UNDER CARRIAGE CLEANER ATTACHMENT, and it amazing how much dirt is underneath!!!
Question should I apply the dark shine after washing the foam off my undercarriage or should I let the undercarriage dry and THEN apply the dark shine ?
@ChemicalGuys I just got my FE1 Sí and I only have 700 miles on it is super clean almost , I don't want to pre soak my undercarriage with water. Do you sell undercarriage detail chemicals that does not need to pre soak with water just spray and wipe ? 🤔
As long as it is clean you don’t need to pre soak or anything. The purpose of washing and pre soaking is to get the dirt to lift and then remove it before the coating so that the coating can stick and lock dirt out. It would have to be extremely clean to be used without washing. Like showroom clean.
Do you guys make anything that can get rubber marks off? It happens all the time on my white car, after a day of chasing people down on the circuit. Only best solution I've found is claybar and it sucks at times because you gotta sit there and scrub that small section of rubber mark
Amazing video guys! I have a lot of problems with salt corroding undercarriage parts due to living in the Midwest, so I was wondering if I had a car that was very low to the ground that I was detailing, how would I get the undercarriage cleaned and detailed?
undercarriage is the most underrated spot on the vehicle
Facts. I always clean it!
Happy detailing!
Yes, make sure to clean it to achieve the best look for your ride!
@@ChemicalGuys FACTSSSS!
pun intended?
I always use barebones been using it since it came out I use it on my frame it turns it black after it sets on their an dries up i never knock it down it last a long time
Great feedback, glad to have you as part of the Chemical Guys family!
How do I clean the carpet that’s protecting the wheel welds ?
Hey Chris! Use Nonsense All Purpose Cleaner with a Nifty Brush to gently clean carpeted wheel well liners.
Undercarriage care is vital out here in the salt belt, blows my mind how people are so negligent of cleaning their vehicles. All you gotta do to prevent rust is clean your car.
I LOVE Bare Bones!! It makes all of my the wheel arch cover panels look factory new!
Enjoy your detailing products!
Along with the ALL CLEAN+ ALL PURPOSE CLEANER, a also use a PRESSURE WASHER UNDER CARRIAGE CLEANER ATTACHMENT, and it amazing how much dirt is underneath!!!
Happy detailing!
@@ChemicalGuys Always!
That's a big project.
Stay tuned!!
Question should I apply the dark shine after washing the foam off my undercarriage or should I let the undercarriage dry and THEN apply the dark shine ?
Bruh I lost it when he brought out the brush he calls the red rocket 🤣🤣🤣🤣🤣🤣🤣🤣
Happy detailing!!
If owner is from Big Bear then they deal with snow and road salt. Undercarriage cleaning is a must in those areas to keep rust away.
Great feedback!
Will bare bones affect suspension rods and components?
No, Barebones will not harm suspension rods or components. Thanks for watching and happy detailing!
Love that you guys are doing 4x4 stuff
Happy detailing!
@ChemicalGuys I just got my FE1 Sí and I only have 700 miles on it is super clean almost , I don't want to pre soak my undercarriage with water. Do you sell undercarriage detail chemicals that does not need to pre soak with water just spray and wipe ? 🤔
As long as it is clean you don’t need to pre soak or anything. The purpose of washing and pre soaking is to get the dirt to lift and then remove it before the coating so that the coating can stick and lock dirt out. It would have to be extremely clean to be used without washing. Like showroom clean.
1st from Puerto Rico 👍🇵🇷
Thanks for watching!
Do you guys make anything that can get rubber marks off? It happens all the time on my white car, after a day of chasing people down on the circuit. Only best solution I've found is claybar and it sucks at times because you gotta sit there and scrub that small section of rubber mark
Hey! Check out this video.
th-cam.com/video/5Sk4biFCy-I/w-d-xo.html
Will the barebone undercoating cleaner will it damage driveway if it’s oil based?
Or is it more like car soap?
Hi Ashton! It can be washed away from pavement. To avoid drips, use a microfiber towel to wipe away excess product.
@@ChemicalGuys ok thank you. I appreciate the help. I also love your guys headlight restorer. It worked a dream on all my cars
Great job
Glad you enjoyed it!
My Ford F-450 needs this ASAP. Where can I buy these two chemicals
What should use on carpet under carriages
Hey Justin! Use Nonsense All Purpose Cleaner and a Nifty Brush to detail carpeted wheel well liners.
@@ChemicalGuys sweet! Already have that in my Arsenal!
Is it ok to get overspray near the brakes when doing this method?
Absolutely!
Keep em coming always look forward to y’all’s knowledge videos!! Thanks chemical guys!!!🧼🧼🧼💪🇺🇸
Glad to have you as part of the Chemical Guys family!
Does the bare bones protect the undercarriage from rust?
Hey! Bare Bones repels grime and corrosive material.
can u use a iron remover on rust spots
Absolutely!
Thumbs up!
Glad you enjoyed it!
1st.
Happy detailing!
Amazing video guys! I have a lot of problems with salt corroding undercarriage parts due to living in the Midwest, so I was wondering if I had a car that was very low to the ground that I was detailing, how would I get the undercarriage cleaned and detailed?
Glad it was helpful! Using Signature Series Orange Degreaser and pressure washing the undercarriage will take a lot of the effort out of the detail.
My hummer undercarriage is dirty & rusty😭😭😭 looking forward for the videos on this series!
More content is on the way, stay tuned!
Does this work on engine
Hey! It is perfectly safe to use All Clean+ for engine bay detailing however check out Black On Black to add shine and protection in the engine bay.
I’m the 1000 view
Happy detailing!