The padding on that engine cover is also there to keep heat transfer down into that compartment. id check it after a long run and make sure its not overly hot. Nice purchase! been wanting one of these for a couple years now myself.
I'd throw a coat of high quality primer on the engine bay cover and then use some of the self adhesive heat shield panels to make the engine bay really pop.
I picked up a seadoo gtx that was silver and blue. When I got it, it was so badly oxidized, rubbing compound and wax didn't do much. I wet sanded with 1500 grit then up to 2000 grit followed with turtle wax paste and finished with meguiars marine wax. The silver which looked like gray primer at first now sparkles and is glossy smooth. I was thinking a drill brush and wax might get at the non slip areas that have stains. Couldn't hurt any.
Why don’t you get under that cover and inside sprayed with Lizardskin. That would soundproof and heat proof it. Plus it will never fall apart. It will outlast the whole thing! Also ceramic coat the whole thing and it will be fully protected.
John I’m wondering if the carbon on the dash is the kind were they dip it into a vat and the design gets on whatever their dipping???? I’m sure you’ll bring it back to it’s former glory and I can’t wait to see the finished product!!! Even better can’t wait to see you using it and having fun on it!!!!!
You didn't show us anything of value. Why not talk about the cutting/polishing/wax ... materials, tools, etc. instead of just "what do you think guys?"
The works toilet bowl cleaner is byyy far the best to use .. i used it on my boat made the hull look brand new
I have used evapo rust in the past for rust removal. Soak a rag/paper towel with it and leave over areas over night.
That’s a sweet boat to remove rust coke classic works good and a brush coke is a anti-oxidant dissolves nails
Lookin good so far. Clean without the decals 👍👍
The Sea Doo is looking great! Gotta love that like new shine without those cheesy old stickers!
Another awesome video thanks for sharing it with us!!! I’ll be looking forward to the next one!!!!
At least you got one with no mechanical issues, everything else is just cosmetic.
Just finished the vid, night and day difference! Cost you some elbow grease though 💪
The padding on that engine cover is also there to keep heat transfer down into that compartment. id check it after a long run and make sure its not overly hot.
Nice purchase! been wanting one of these for a couple years now myself.
Looks like it was a good buy! I’m sure you’ll have it lookin good on short order. Also good call on the Bimini in this Florida sun!
Wow super progress..Nice work.
Thumbs UP>>!
Cool rig, that will be a blast to use when you get it cleaned up & running! Thanks man!
Awesome video! Cant wait to see the seat cover video!
Looking really good. Have fun with your new boat
Looks great without the graphics down the side but it would be a great place to put your Boosted Motorsports logo!
That's an awesome idea! I'm kicking myself, for not thinking of it first! Great suggestion!!!
Maybe try some "Soft Scrub"? It's an effective kitchen / bathroom cleaner.
I'd throw a coat of high quality primer on the engine bay cover and then use some of the self adhesive heat shield panels to make the engine bay really pop.
I use toilet cleaning. Like the cheap blue toilet cleaner. It takes stains off of fiberglass boats really well.
I picked up a seadoo gtx that was silver and blue. When I got it, it was so badly oxidized, rubbing compound and wax didn't do much. I wet sanded with 1500 grit then up to 2000 grit followed with turtle wax paste and finished with meguiars marine wax. The silver which looked like gray primer at first now sparkles and is glossy smooth. I was thinking a drill brush and wax might get at the non slip areas that have stains. Couldn't hurt any.
Bro use old yoga mats? For engine bay cover
Wow what a progress on the boat its looking nice 👌 better than what it was i would've took those stickers off to #BSTEDMTRSPRTS
You need a smaller polisher it would be faster with those lines
Why don’t you get under that cover and inside sprayed with Lizardskin. That would soundproof and heat proof it. Plus it will never fall apart. It will outlast the whole thing! Also ceramic coat the whole thing and it will be fully protected.
John I’m wondering if the carbon on the dash is the kind were they dip it into a vat and the design gets on whatever their dipping???? I’m sure you’ll bring it back to it’s former glory and I can’t wait to see the finished product!!! Even better can’t wait to see you using it and having fun on it!!!!!
Magic erasers should remove the stains
Looks great looks like your gonna have a ton of fun with it. What part of Florida did you end up moving to?
🌞 🔥 🤘🏼🔧💯
Iron out spray or the works toilet bowel cleaner will clean off that rust in no time
Bowl I mean lol
I own a Speedster 150 with the 255hp supercharged.. the thing rips.
¹55 hp úsé kes ful highh kíg ogervrañgé
Yeah I want to put the supercharged engine in there!
Why don't you just wet sand it with like 1500, first?
Just put your boosted motorsport logos on
That would be cool too!
Ten stages later.…Ceramic coated 😂
How do I open the engine compartment of a Sea-doo Sportster 4-Tec when the latch cable broke free inside the locked engine compartment?
I wonder if can put 787 motor or rxp motor in sportster?
Where did you order the upholstery
Just out of curiosity, because I have no! Is it possible to have it wrapped, and how would that hold up on a boat?
Yeah many people wrap boats!
Paint same color as trucks blue
Paint it white
You didn't show us anything of value. Why not talk about the cutting/polishing/wax ... materials, tools, etc. instead of just "what do you think guys?"