Thanks for the review. I have actually bought an E7 desk now and I find it to be both sturdy and more stable than I was expecting. The only thing I have noticed is that the feet on my desk are slightly bowed, before assembly i.e. put something flat across the top lengthways and it doesn't lie flat, the middle where the column attaches is bowed downwards by about 1/4 inch. Can you or anyone confirm if this is normal, as it seems odd that 2 straight pieces of metal spot welded together should be bowed? Flexispot seem reluctant to send a replacement so not sure if this is a problem or not. Any help would be appreciated
Thanks for the reply. No, it doesn't wobble because the bow is very small (only really noticeable if you get down and look along the edge of the feet). So the adjustable screw feet ensure it is well enough clear of the ground. Flexispot want to put it down to normal manufacturing - I'm not sure. But I have looked at a youtube assembly video and looking very carefully it seemed like the feet were slightly bowed too so they might be right. As long as the bowing doesn't increase with weight of frame and top on it, and Flexispot confirm this won't affect the warranty then I guess I'll stick with it. Like the desk apart from this niggle!
Well, I wasn't able to find out the make and model. I can tell you that it has a dual motor setup housed inside the arms itself, and that those arms are sealed. They'll push 355lbs and the controller seems to be a simple one with a powered USB port on the side. Not sure what else I can answer, but hit me up with what you are looking for specifically and I'll do my best to answer.
Own E7 amazing desk, couldn't be more stable.
That's for sure. I love this desk.
What size desk did you get for the bamboo top ? Default is 48" x 24" but they offer larger if you pay more
This particular one is 60" wide, but I went whole hog for the next one - it's 79''X35"'!!
Thanks for the reply. So I guess you are not getting it from flexispot, or do they offer custom sizes?
Good review by the way, thanks
Thanks for the review. I have actually bought an E7 desk now and I find it to be both sturdy and more stable than I was expecting. The only thing I have noticed is that the feet on my desk are slightly bowed, before assembly i.e. put something flat across the top lengthways and it doesn't lie flat, the middle where the column attaches is bowed downwards by about 1/4 inch. Can you or anyone confirm if this is normal, as it seems odd that 2 straight pieces of metal spot welded together should be bowed? Flexispot seem reluctant to send a replacement so not sure if this is a problem or not. Any help would be appreciated
Oh that doesn't seem right. Mine are completely flat. I'd think that'd make the table wobble, no?
Thanks for the reply. No, it doesn't wobble because the bow is very small (only really noticeable if you get down and look along the edge of the feet). So the adjustable screw feet ensure it is well enough clear of the ground. Flexispot want to put it down to normal manufacturing - I'm not sure. But I have looked at a youtube assembly video and looking very carefully it seemed like the feet were slightly bowed too so they might be right. As long as the bowing doesn't increase with weight of frame and top on it, and Flexispot confirm this won't affect the warranty then I guess I'll stick with it. Like the desk apart from this niggle!
What make are the motors and control unit ? thank you.
I'm not sure - but I'll find out!
Well, I wasn't able to find out the make and model. I can tell you that it has a dual motor setup housed inside the arms itself, and that those arms are sealed. They'll push 355lbs and the controller seems to be a simple one with a powered USB port on the side. Not sure what else I can answer, but hit me up with what you are looking for specifically and I'll do my best to answer.
This is not the pro version.