Air idle control valve. Attached to the backside of the throttle body. Kind of hard to get to with this model. All it needs most likely is to be taken off and cleaned out with carb spray. If it's that dirty, I would also clean out the throttle body. Change the spark plugs, put in iridium spark plugs for better burning of fuel and less gunk up. Replace distributor cap and rotor for better burning of fuel and less gunk up.
Another trick u can try. Disconnect battery cables touch positive and negative cables together, Off Battery, leave for 15 min to reset computer to factory. Then do high idle trick after. If it does not work , you may have another issue. I am not a certified mechanic, this is based off videos I watched and what worked for me. Good luck.
Nice, I'm gonna give it a shot today. Cleaned EGR, Vtec Solenoid, throttle body, IAC valve, Seafoamed the engine; Now she's surging... Surge aside, she's running excellent 😎
Air idle control valve. Attached to the backside of the throttle body. Kind of hard to get to with this model. All it needs most likely is to be taken off and cleaned out with carb spray. If it's that dirty, I would also clean out the throttle body. Change the spark plugs, put in iridium spark plugs for better burning of fuel and less gunk up. Replace distributor cap and rotor for better burning of fuel and less gunk up.
How do I turn the fans on and off for two cycles?
i did not understand that either
Estou com esse mesmo problema, vou fazer isso que você fez, valeu...👍👍👍
Your IAC valve
didnt work
vacuum leak somewhere
didnt work
Another trick u can try. Disconnect battery cables touch positive and negative cables together, Off Battery, leave for 15 min to reset computer to factory. Then do high idle trick after. If it does not work , you may have another issue.
I am not a certified mechanic, this is based off videos I watched and what worked for me.
Good luck.