Hyundai Getz Coolant replacement | easy coolant replacement
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Hyundai Getz coolant relplacement
Change Coolant
How many liters of coolant use in hyundai getz
Hyundai getz coolant change
3.8 liters of coolant consumed
#CoolantReplacement
#Hyundaigetzcoolantreplacement
#ChangeOfCoolantHyundai
Disclamer this is not a sponsored video
No Copyright infringement intended
For fair use only
Any comment or suggestions just comment down below or you can contact me directly to my Facebook account click link below
/ ren.santiago.58
Remove thermostat and hose for easier flushing coolant fron the engine block, temporary install w/o the thermostat, fill with distilled water, start the engine for 5 mins, then flush it again, repeat process until coolant is clear.
Switch heater on too when cleaning system..
hey bro great video, can you tell me where the drain plug is located?
@@munjarez1721 at the video bro.
Under the radiator
Thanks for your video bro. Small doubt, in operation Manual, it is mentioned 5.5 litres coolant capacity but you saying 3.8 litres. Please clarify bro.
There's no problem with that bro.
Almost 4 liters, reservoir and radiator was filled with coolant. Try to check your reservoir after your first ride if the coolant decreases just put more coolant. But in my case, 3.8liters is enough.
It is possible he didn't have the heater on so not all the coolant was drained ;)
5.5 l Ratio= 30 parts coolant:70 parts water & LLc
thanks man 🙏
Does it need to be regassed of the ac or something
No theres no need bro
Is it okay to put pure coolant in it? Or better if mixed with distilled water? Thanks.
Pure coolant much better bro.
@@learnmoretroops4335false
Hi. Thanks for the video. The drain plug - where is it located?
At the bottom of radiátor thath will be a hose unscrew It and let it drain
But it’s not a hose in the video, ?
At the bottom bro. Thanks
nice very helpful thanks
How you empty the reservoir? Do you fill the radiator with the hose attached to the reservoir or without it? Thanks
Totally removed the reservoir and Clean it separately
Good info👍
Thank you for the video
Always welcome thank you also
Anyone knows where the engine coolant hose at the bottom connects to?
In this process you removed thermostat valve or not
No bro. Draining flag only. As long as your thermostat valve is in good condition no need to open
Thermo fans won't turn on now??
Gud day sir i ask some question.Is it okay sir if i add coolant even if they fillled of water on my radiator
No bro, you'll need to drain the water and put pure coolant
Much better if you change it to coolant.
Thank you so much sir
@@midelguinita9285 your always welcome bro
I'm barely getting any coolant into the Rad on my 1.1 CDX and it's already full. Don't know what's going on.
Try to check the limit of the reservoir bro
Total 5 leters na
What is the size of drain plug for hyundai getz?
Philips screw bro
@@learnmoretroops4335idiot, that’s not the size 😂
Buen video
Thanks bro
@@learnmoretroops4335 tuve que quitar la manguera inferior, porque mi getz no tenia ese tapon del video, sin embargo el resto funciono
Am I just blind or what? I have the exact same tank but I can't see the level from the side where the min max is. It's white like in this video and not at all transparent. Shouldn't I be able to see its level from the side?
@@Arisgow1 maybe your coolant jar was already full of dirt. Try to use cleaning kit bro
The bad air filter is from the first generation 😂
Yahh thats the reality bro 😅
Switch heater on too when cleaning system..